Sanus BSA-IWP801 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sanus BSA-IWP801 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Verify TV Plug Fit
Tools Needed
BEFORE DRILLING ANY HOLES:
Make sure your TV plug fits in the upper
module 02 and your soundbar fits in
soundbar module 01 .
Verify Wall Compatibility
CUTTING
TEMPLATE
STEP 1
Upper Module
Driver Bit
(hole saw)
Hole Saw
3 in.
Lower Module
Soundbar
Module
Power Cord
Splitter Cord Drywall Saw
05
04
07
06
08
02
01
03
Assemble Hole Saw
a
bCut Holes
Drill Holes
Maximum Distance: 6 feet
Maximum:
3 feet
Maximum:
4 ½ feet
08
07 07
TIP: Drill the top hole BEHIND your TV and the soundbar hole BEHIND your
soundbar.
2X
1X
This Cable Kit is designed to fit into both
interior and exterior walls constructed with:
Minimum Space into Wall: 3 in.
Minimum Drywall Thickness: 1/2 in.
NOTE: Walls
with blown-in type
insulation may
require removal
of some insulation
inside the cavity.
Drywall
Stud
Back Wall
06
MAX: 1 ⅛ in. (29 mm)
02
01
07 08
Model BSA-IWP801
OWNERS GUIDE
Cable Concealer TV &
Soundbar Power
Thank you for choosing SANUS!
Please take a moment to let us know how we did:
1-800-359-5520 info@sanus.com
6436 City West Parkway, Eden Prairie, MN 55344
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ENTIRE MANUAL PRIOR TO USE SAVE THESE INSTRUCTIONS
CAUTION: Avoid potential personal injuries and property damage!
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Do not use this product for any purpose not explicitly specified by manufacturer.
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact
customer service at 1-800-359-5520.
This product conforms to and should be properly grounded in compliance with requirements of the current National Electrical Code or
codes administered by local authorities.
All electrical products may present a possible shock or fire hazard if improperly installed or used. This product may bear the mark of a
Nationally Recognized Testing Laboratory and should be installed in conformance with current local and/or the National Electrical Code.
WARNING: RISK OF FIRE AND SHOCK. Do not connect the modules 01 or 02 to any other circuits or outlets.
CAUTION: RISK OF FIRE AND SHOCK. ONLY intended for use on 15 ampere branch circuits. Do not install power supply cord 03
within wall cavity.
WARNING: This product contains small items that could be a choking
hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are
missing or damaged, do not return the damaged item to your dealer; contact Customer
Service. Never use damaged parts!
Supplied Parts and Hardware
Legrand AV Inc. and its aliated corporations and subsidiaries (collectively, Legrand”), intend to make this manual accurate and complete. However, Legrand makes no claim that the
information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The
information contained in this document is subject to change without notice or obligation of any kind. Legrand makes no representation of warranty, expressed or implied, regarding the
information contained herein. Legrand assumes no responsibility for accuracy, completeness or suciency of the information contained in this document.
©2022 Legrand AV Inc. All rights reserved. Made in China.
Legrand AV Inc. 6436 City West Parkway; Eden Prairie, MN 55344 USA
6901-603104
Tape Measure Phillips ScrewdriverPencil
Paint (optional)
Surfaces are paintable
to match your decor
Electric Drill
Fish Tape
10
Hole Saw Handle
09
Note: Attach and use hole saw handle 09 provided to manually drill holes if an
electric drill isn’t available.
v
Removal
Route Power Cords Route Low Voltage Cables Secure Modules Power Up
STEP 2 STEP 3 STEP 4 STEP 5
NOTE: The gaskets
can be removed for larger
cables.
For Soundbars
with External Power
Supplies only.
For Soundbars
with External Power
Supplies only.
Replace
Trim Plate
ac
bRemove
trim plates
Turn screws to
remove modules
Loosen ONLY
enough to
remove module.
Unplug
power
TV
TV
Soundbar
Soundbar Power Supply
Replace
Trim Plate
DO NOT over tighten screws
DO NOT over
tighten screws
DO NOT
loosen the
screws
03
05
04
02
02
01
03
03
01
02
02
01
3X
2X
3X
03
Assemble and use the fish tape 10
provided to pull the cables through the wall.


Produktspezifikationen

Marke: Sanus
Kategorie: Nicht kategorisiert
Modell: BSA-IWP801

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sanus BSA-IWP801 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Sanus

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-