Sanremo Capri Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sanremo Capri (16 Seiten) in der Kategorie Kaffeemaschine. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
1
mod. CAPRI SAP - SED
Libretto Istruzioni mod. Capri SAP - SED
Instruction Booklet
Bedienungsanleitung
Livret D’Instructions
Libro De Instrucciones
19
This instruction booklet contains all the necessary information and advice for best possible use and
storage of your coffee machine.
This booklet refers to the following models:
Model – CAPRI SAP
Semiautomatic with continuous dispensing and solenoid valve controlled by rocker switch located on the
control panel. Available in 1, 2 group versions.
Model – CAPRI SED
Microprocessor-controlled electronic model with programmable dosing through a keypad with indicator
lights. Available in 1, 2 group versions.
SPECIFICATIONS
GROUPS 1 2
Width mm 430 600
Depth mm 485 485
Height mm 505 505
Capacity litres 4,5 8,6
Voltage V 120/230/400 120/230/400
Heating element input kW 1,95/2,4 2,7/4,5
Electric pump input kW 0,3 0,3
Solenoid valve input kW 0,0135 0,0225
Automatic level controller input kW 0,01 0,01
Boiler design pressure (2 Bar) MPa 0,2 0,2
Boiler working pressure (0,8-1 Bar) MPa 0,08:0,1 0,08:0,1
Safety valve calibration pressure (1,8 Bar) MPa 0,18 0,18
Exchanger design pressure (20 Bar) MPa 2 2
Exchanger safety valve calibration pressure (12 Bar) MPa 1,2 1,2
Mains water pressure (max) (6 Bar) MPa 0,6 0,6
Coffee dispensing pressure (8-9 Bar) MPa 0,8/0,9 0,8/0,9
The weighted sound pressure level A of the coffee machine is less than 70dB.
For correct appliance operation and trouble-free maintenance, please read this booklet carefully and
comply with the instructions and rules, also referring to the diagrams given in it.
INSTALLATION
Before installing the appliance ensure that the mains voltage and power correspond to the data given in
the specifications table. Take the appliance out of the packaging and put it in its final place of installation
ensuring that it is stable and safe and that there is the necessary space for using it.
Electrical connection
Connect the power cable to the mains supply through a circuit breaker with suitable capacity. The
appliance must also be efficiently earthed.
N.B. CHECK THAT THE DATA ON THE RATING PLATE CORRESPOND TO YOUR MAINS ELECTRICITY
SUPPLY.
Water connection
1) Only cold water must be supplied to the appliances.
2) If the mains water pressure exceeds 6 bar, a pressure reducer must be installed to regulate the outlet
pressure to a maximum of 6 bar.
ENGLISH
20
3) Connect the drain hose to the tray, avoiding sharp bends and keeping a sufficient slope for regular
flow of the drain water.
4) Connect the 3/8” hose to the mains outlet and then to the water softener and to the appliance.
N.B. A water softener is indispensable for correct appliance operation, best coffee in the cup and long
life of the components, since it removes scale and residues from the water that would otherwise shorten
their life.
The company is relieved of all and any liability in the event of failure to comply with the
above instructions.
USE
Preliminary check
Before using the appliance, check that:
- the plug is inserted properly into the mains power outlet;
- the water filling hose is correctly connected to the mains water outlet, check for leaks and that the water
tap is open;
- the drain pipe is positioned in accordance with the preceding instructions.
With a steam tap (B) open, put the on/off switch (D) to position 1 and wait for the water in the boiler to
reach the maximum level set by the electronic control. If the boiler does not fill within the set time-out
(90 sec.), the pump stops and the indicator lights on the keypad start to blink. In this case put the on/off
switch (D) to position 0 and then to position 1 to finish filling the boiler.
Now put the on/off switch (D) to position 2 so that the heating elements are powered and therefore start
to heat the water.
Wait for steam to come out the steam nozzle (B), then close the tap and, using the Boiler pressure
gauge, check that the pressure has reached and maintains a value of 0.8:1 bar. If it is not on this value,
turn the adjusting screw on the pressure switch (+increase, - decrease, see figure below).
Pressure switch parts:
1 - Ring
2 – Membrane unit
3 – Teflon membrane
4 - Nut
5 – Disk with pipe tap
6 - Grommet
7 - Screw
Hot water
Ensure that the boiler pressure gauge indicates a pressure of 0.5:1 bar. Turn the tap knob (C) counter-
clockwise.
Pay the utmost attention in order to prevent scald burns.
Steam
Except for the 1-group machine that has just one steam nozzle, all the other models have 2 located
at the sides. These steam nozzles are recessed but can swivel out thanks to an articulated joint. To
dispense steam, just turn the knobs (B) counter-clockwise.
Pay the utmost attention in order to prevent scald burns.
Coffee with Mod. CAPRI SAP
Insert the filter holder (E) into the group head (F) turning the filter holder counter-clockwise. Press button
(I), wait for the required quantity of coffee to be dispensed and then put it back to its original position.
ENGLISH


Produktspezifikationen

Marke: Sanremo
Kategorie: Kaffeemaschine
Modell: Capri

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sanremo Capri benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kaffeemaschine Sanremo

Bedienungsanleitung Kaffeemaschine

Neueste Bedienungsanleitung für -Kategorien-