SanDisk SSD Ultra 3D Bedienungsanleitung
SanDisk
Solid-State-Laufwerke (SSD)
SSD Ultra 3D
Lesen Sie kostenlos die š deutsche Bedienungsanleitung fĆ¼r SanDisk SSD Ultra 3D (7 Seiten) in der Kategorie Solid-State-Laufwerke (SSD). Dieser Bedienungsanleitung war fĆ¼r 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/7
1
SanDiskĀ® Solid State Drive
Quick-Start Installation Guide
Upgrading your existing hard disk drive (HDD) to a new SanDisk Solid State Drive (SSD) is easy!
This guide provides quick instructions on how to upgrade your SATA-based desktop or notebook computer
HDD to a SanDisk SSD. We also cover cloning your data from your current HDD to your new SanDisk SSD
using cloning software.
Replacing your HDD with a solid state drive consists of three easy steps:
1. Connect your SanDisk SSD to your computer
2. Clone the data from your existing HDD to your new SanDisk SSD
3. Uninstall your HDD and replace it with your new SanDisk SSD
ī
ā¢ī
Obtainī
dataī
cloningī
software.ī
There are many options available for purchase, but in this guide we will use data cloning software
provided by ApricornĀ® to walk you through the data cloning process.
ī
ā¢ī
Conī¼rmī
youī
haveī
theī
requiredī
hardware*ī
forī
yourī
installationī
scenario:
1. SATA data cable
(required for desktops computers only)
2. USB-to-SATA data cable
3. 3.5-inch mounting adapter and screws
(required for desktop computers only)
4. Phillips screwdriver
*ī
Eachī
ofī
theī
aboveī
hardwareī
componentsī
areī
soldī
separatelyī
orī
canī
beī
foundī
inī
theī
SanDiskī
SSDī
Conversionī
Kit.ī
Seeī
www.sandisk.com/go-SSD
BEFOREī
YOUī
START
1
4
This guide applies to most solid state drives;
check the instructions included with your SSD
for more details.
NOTE:
2
3
2
Now that you have the required hardware and data cloning software, a few safety notes:
ī
ā¢ī
Handleī
yourī
SSDī
withī
care.
ī
ā¢ī
Keepī
yourī
SSDī
inī
theī
protectiveī
anti-staticī
sleeveī
untilī
youī
areī
readyī
toī
installī
it.
ī
ā¢ī
Doī
notī
touchī
theī
goldī
connectorsī
onī
yourī
SSD.
ī
ā¢ī
Toī
minimizeī
staticī
electricity,ī
touchī
yourī
computerī
caseī
beforeī
handlingī
theī
SSD.
ī
ā¢ī
Doī
notī
disassembleī
theī
SSDī
inī
anyī
way;ī
thisī
willī
voidī
theī
SanDiskī
Manufacturerāsī
warranty.**
Nowī
youāreī
readyī
toī
begin!
SAFETYī
INSTRUCTIONS
**ī
Toī
reviewī
theī
warrantyī
forī
thisī
product,ī
seeī
www.sandisk.com/wug.
Inī
theī
ī¼rstī
step,ī
youī
willī
connectī
yourī
SanDiskī
SSDī
toī
yourī
computerī
inī
orderī
toī
cloneī
yourī
data.ī
Simply follow these directions:
1. Carefully connect SATA end of the SATA-to-USB cable to your SanDisk SSD.
2. Connect the USB end of the SATA-to-USB cable to an available USB port on your computer.
ī
3.ī
Waitī
forī
theī
operatingī
systemī
toī
recognizeī
theī
SanDiskī
SSD.
Connecting Your SSD to Your Computer
Thatās it, now youāre all set to clone your data!
SATA devices such as SSDs may draw more power than some computers are capable of
delivering.ī
Ifī
theī
SanDiskī
SSDī
isī
notī
recognized,ī
removeī
allī
otherī
USBī
devicesī
fromī
yourī
computerī
keepingī
onlyī
theī
SanDiskī
SSDī
connected.ī
Keepī
theseī
devicesī
disconnectedī
untilī
the data migration is complete.
NOTE:
STEPī
1
3
Inī
theī
nextī
step,ī
youī
willī
cloneī
theī
dataī
fromī
yourī
existingī
HDDī
toī
yourī
newī
SanDiskī
SSD.ī
Thisī
stepī
isī
theī
same for both desktop and notebook computers.
Letāsī
getī
started:
Clone your dataSTEPī
2
2.ī
Followī
theī
promptsī
toī
beginī
theī
cloningī
process. (These may vary depending on the
software used.)
1. Run your preferred data cloning software.
ī
(Weī
areī
usingī
ApricornĀ®ī
EZī
Gigī
IVī
withī
Data Select.)
3. Select your source drive. (This is usually your
ī
computerāsī
internalī
driveī
andī
isī
denotedī
byī
theī
ī
preī¼xī
āIDEā.)
4. Next, select your destination drive. (This your
SSD connected to your computer by the
SATA-to-USB cable.)
Produktspezifikationen
| Marke: | SanDisk |
| Kategorie: | Solid-State-Laufwerke (SSD) |
| Modell: | SSD Ultra 3D |
Brauchst du Hilfe?
Wenn Sie Hilfe mit SanDisk SSD Ultra 3D benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Solid-State-Laufwerke (SSD) SanDisk
7 August 2024
4 August 2024
30 Juli 2024
29 Juli 2024
24 Juli 2024
9 Juli 2024
8 Juli 2024
7 Juli 2024
Bedienungsanleitung Solid-State-Laufwerke (SSD)
- Solid-State-Laufwerke (SSD) Samsung
- Solid-State-Laufwerke (SSD) Corsair
- Solid-State-Laufwerke (SSD) Gigabyte
- Solid-State-Laufwerke (SSD) Sony
- Solid-State-Laufwerke (SSD) Verbatim
- Solid-State-Laufwerke (SSD) Buffalo
- Solid-State-Laufwerke (SSD) Fantec
- Solid-State-Laufwerke (SSD) TrekStor
- Solid-State-Laufwerke (SSD) Western Digital
- Solid-State-Laufwerke (SSD) ADATA
- Solid-State-Laufwerke (SSD) Seagate
- Solid-State-Laufwerke (SSD) Freecom
- Solid-State-Laufwerke (SSD) IStorage
- Solid-State-Laufwerke (SSD) Transcend
- Solid-State-Laufwerke (SSD) Emtec
- Solid-State-Laufwerke (SSD) LaCie
- Solid-State-Laufwerke (SSD) Zotac
- Solid-State-Laufwerke (SSD) Intel
- Solid-State-Laufwerke (SSD) Kingston
- Solid-State-Laufwerke (SSD) Aluratek
- Solid-State-Laufwerke (SSD) XPG
- Solid-State-Laufwerke (SSD) Advantech
- Solid-State-Laufwerke (SSD) OWC
- Solid-State-Laufwerke (SSD) Crucial
- Solid-State-Laufwerke (SSD) Patriot
- Solid-State-Laufwerke (SSD) DIGISTOR
- Solid-State-Laufwerke (SSD) G-Technology
- Solid-State-Laufwerke (SSD) Origin Storage
- Solid-State-Laufwerke (SSD) Silicon Power
- Solid-State-Laufwerke (SSD) ATP
- Solid-State-Laufwerke (SSD) Kingston Technology
- Solid-State-Laufwerke (SSD) Goodram
- Solid-State-Laufwerke (SSD) Kioxia
- Solid-State-Laufwerke (SSD) SK Hynix
Neueste Bedienungsanleitung fĆ¼r -Kategorien-
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024