Sana -Mill Bedienungsanleitung

Sana Anderes Küchengerät -Mill

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sana -Mill (4 Seiten) in der Kategorie Anderes Küchengerät. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
Troubleshooting Cleaning the Mill
If the motor w i l l not st art.
Simply rotate the grain funnel to the coarse setting (counter-
clockwise direction) until the motor starts. Then adjust the stones
again to the desired setting.
If the motor stalls during operation.
This generally stems from overheating due to improper usage – a
built-in thermal cut-off switch stops the motor to prevent serious
damage. Unplug the power cord and allow the mill to cool down
for a few minutes. Then you should be able to resume the milling. If
the problem recurs, then you need to troubleshoot the source: Is
the grain too moist? Are the millstones or the mill chamber
clogged? Is there a foreign object caught between the millstones?
Did you turn the mill on with the hopper full and the millstones at
the finest grind setting?
If the grain is too moist, then the millstones could be smeared and
clogged. In this case, the normal grinding becomes much more
quiet, and very little flour exits the flour spout. Simply adjust the
funnel to a coarser setting, and resume milling with an appropriate
grain. The millstones will clean themselves.
Whenever you grind at the coarse setting, the millstones and mill
chamber are cleaned automatically. If you do not plan to use your
mill for a longer period of time, such as during a vacation, we
recommend that you clean the millstones from all residue. Using a
household vacuum cleaner simplifies this task. Turn on the mill with
the millstones at the coarse setting. Hold the vacuum nozzle in front of
the flour spout.
If the millstones are smeared with an oily residue, you can clean
them by grinding a cup or so of wheat or rice at the medium setting
to remove all trace.
You can also remove the millstones to clean them with a brush.
However, it is very important whenever you handle the millstones or
the milling chamber, that you first unplug the power cord! Then,
remove the grain funnel by unscrewing it in the counter-clockwise
direction. You can then remove the millstones, and clean them with
a brush. In handling the millstones, take special care not to lose the
two small, steel springs located in the plastic housing of the lower
millstone.
Warranty
The manufacturer guarantees against material and fabrication
defects, stemming from the normal, intended operation of this grain
mill, for a period of 12 years, beginning from the date of purchase.
The flour spout and other breakable components are excluded
specifically from this warranty. This warranty is null and void if the
mill is forcefully misused or used improperly in any way.
Dealer Location
Operating
Instruction
Sana-Mill
Thank you!
…for choosing our Sana-Mill to assist you in managing
your whole grain kitchen. We take pride in having
steadily raised the bar in performance, design and
functionality of the household grain m i l over the last
twenty years. This quality appliance should offer you
years of excellent service. Before you use your mil,
however, please read the following instructions care-
Instructions for Operation
Use only thoroughly cleaned grain, free of pebbles and other
foreign objects. Otherwise you could damage the millstones.
Always use dry grain in your mill. You can recognize a
“
dry
”
grain by squeezing it between the back of a spoon and a hard
surface. If it cracks loudly, the grain is dry. If it flattens under
pressure, looking something like a rolled oat, then it is moist (or
oily). Rye grain needs to be stored at least six months following
harvest before grinding. Oily grains such as oats should not be
ground at the finest setting.
Never grind popcorn in your Wolfgang mill. Only regular corn
varieties used for corn meal and polenta should be used.
Your mill housing is made largely of solid wood. You can protect
and care for the housing by properly locating it away from heating
vents and other sources of heat and moisture, such as your stove.
The solid wood housing is an organic material subject to warping,
if exposed to significant changes in temperature and/or humidity.
Use your mill only with alternating (AC) current. Make sure
that your household power supply matches the voltage specifica-
tions printed on the bottom of the mill.
This mill is designed for normal household use, and is not
suitable for commercial use.
Never leave your mill unattended in use. Keep small children
away from the mill at all times.
When in use, place your mill on a solid and level surface, such as a
kitchen counter. The openings on the bottom side of the mill must
remain open and unobstructed to allow adequate ventilation.
Simple operational steps
Plug in the power cord.
Turn on the mill
’
s switch.
Adjust the grind setting.
Pour grain into hopper and begin to mill. Re-adjust grind
setting of meal/flour, if needed.
When finished milling, turn off the mill
’
s switch and unplug
the power cord.
Adjusting the fineness of the milled product
To adjust the fineness of the flour or meal, simply rotate the hopper!
You can continually adjust the grind setting between coarse and fine.
To locate the finest setting, first turn on the mill, with the grain hop-
per empty, and rotate the hopper clockwise in the
“
fine
”
direction,
until you can just hear the millstones touch. Then rotate the hopper
back slightly in the counter-clockwise direction, to the point just
where the sound of the millstones
’
contact disappears. This is the clo-
sest space between the two millstones, and therefore the finest grind
setting. The scale below the hopper can help you remember this set-
ting. This point on the scale may vary slightly with changing tempe-
rature and humidity in your kitchen.
While grinding, you can rotate the hopper in either direction, in order
to produce a finer or coarser milled product. If the mill is turned off
and the hopper contains grain, do not adjust the setting to the fine
setting! This could jam remaining flour and grain between the
millstones, causing the motor to stall. First rotate the setting toward
the coarse setting, turn on the mill, and then readjust the setting as
desired.
Your Sana Mill at a glance
Mill Hopper Lid
Grain Hopper
Grind Setting Scale
Flour Spout
Power Switch
Technical Info
Grinding capacity
(wheat with 13% moisture content, ground
at fine setting)
Hopper capacity
(wheat)
Millstone material:
Millstone size, inches:
Electric motor size, watt:
Maximum noise level, db:
Weight:
Height:
Width:
Depth:
Maximum height of bowl:
at flour spout
Housing:
Warranty:
100 g per minute
850 g
corund/ceramic
(continuously adjustable)
85 mm
360
70
8kg
335 mm
152 mm
152 mm
150 mm
Solid beechwood treated
with natural vegetable oils
12 years
fully.

Produktspezifikationen

Marke: Sana
Kategorie: Anderes Küchengerät
Modell: -Mill

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sana -Mill benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Anderes Küchengerät Sana

Sana

Sana -Mill Bedienungsanleitung

12 Juni 2023

Bedienungsanleitung Anderes Küchengerät

Neueste Bedienungsanleitung für -Kategorien-

Brentwood

Brentwood TS-1045W Bedienungsanleitung

13 Juni 2024
Brentwood

Brentwood TS-256W Bedienungsanleitung

13 Juni 2024
Brentwood

Brentwood TS-1045BK Bedienungsanleitung

13 Juni 2024
Brentwood

Brentwood TS-1045BL Bedienungsanleitung

12 Juni 2024
Brentwood

Brentwood TS-256R Bedienungsanleitung

12 Juni 2024
Brentwood

Brentwood TS-256BL Bedienungsanleitung

12 Juni 2024
Brentwood

Brentwood TS-1005 Bedienungsanleitung

12 Juni 2024
Ankarsrum

Ankarsrum Blender Bedienungsanleitung

11 Juni 2024
Ankarsrum

Ankarsrum Double Beater Bedienungsanleitung

11 Juni 2024
Ankarsrum

Ankarsrum Mincer Bedienungsanleitung

11 Juni 2024