Samsung CS-29Z50MV Bedienungsanleitung

Samsung Nicht kategorisiert CS-29Z50MV

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Samsung CS-29Z50MV (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
English - 1
AA68-03272E-00
➢The actual configuration of your TV may be different,
depending on your model.
Control Panel (depending on the model)
◆You can use the buttons to switch the TV on when it is¨
in standby mode depending on the model.
◆The ˇ ¨and buttons also have the same function as the
œ √ † …/ / / buttons on the remote control.
◆If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
Front (or Side) Panel
ŒInput source selection
´On-screen menu display
ˇVolume adjustment
¨Channel selection
ˆStandby & Timer indicator
ØRemote control sensor
∏Power on/off
➢The actual configuration of your TV may be different,
depending on your model.
Connection Panel (depending on the model)
cable television
network
Rear Panel
☛Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the Œ (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the SCART Input/Output
The SCART and SCART connectors are used for´ ˇ
equipment, such as a VCR, DVD, decoder, satellite receiver,
video game device, or video disc player.
The SCART is also used for equipment with an RGB´
output, such as a video game device or video disc player.
continued...
or
ŒAudio input
´Video input
ˇS-Video input
¨Headphone jack
Front (or Side) Panel
☛Please be sure to match the color coded input terminals
and cable jacks.
Connecting to the RCA Input
The Œ ( - /AUDIO L R) and ´ (VIDEO) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.
Connecting to the S-VIDEO Input
The ˇ (S-VIDEO) and Œ ( - /AUDIO L R) connectors are used
for equipment with an S-Video output, such as a camcorder
or VCR.
Connecting Headphones
The ¨ (headphone) jack is used for watching a television
programme without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.
➢When both the front (or side) AV and rear connectors
are connected to external equipment, the front (or
side) AV receives priority.
Connecting to the RCA Input
The RCA and RCA connectors are used for equipment,4 5
such as a VCR, DVD, decoder, satellite receiver, video game
device, or video disc player. (When using the mono
equipment, connect to the input connector.)AUDIO-L
The RCA connectors are used for equipment such as a7
DVD with component output (480i only).
Connecting to the RCA Output
The RCA connectors are used for equipment, such as a6
recording VCR or audio system.
Connecting to the Woofer
The WOOFER 8connector is used for connecting the
woofer box (to take full advantage of low frequency
response).
COLOR TELEVISION
Owner’s Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
Register your product at
www.samsung.com/global/register
English - 2
˝GAME
Used to enjoy the game
programmed in the TV.
ÔTURBO
Used to select the turbo
sound option.
CH.SCAN
Press to have the TV
automatically scan all of
the channels it has
memorized.
ÒPRE-CH
Used to switch
repeatedly between the
last two channels
displayed.
ÚVIDEO
Used to display all of the
available video sources.
ÆP /
Used to display the next
or previous stored
channel.
ıINFO
Used to view the
channel information and
setting status you
selected.
˜EXIT
Used to exit from any
display or return to
normal viewing.
¯ENTER
While using the on-
screen menus, press the
ENTER button to
activate (or change) a
particular item.
˘P.SIZE
Used to change the
screen size.
¿SLEEP
Used to select a preset
time interval for
automatic turn off.
¸P.MODE
Used to select the
picture effect.
˛S.MODE
Used to select the
sound effect.
◊S.MENU
Used to display the
sound menu.
ŒPOWER
Used to switch the TV
on and off.
´Numeric buttons
Used to select channels
directly.
ˇ
-/--
Used to select a channel
numbered ten or over.
Press this button, then
“
--
” symbol is
displayed. Enter the
two-digit channel
number.
¨MUTE
Used to switch the
sound off temporarily. To
turn the sound back on,
press the MUTE, , or
button.
ˆ/
Used to increase or
decrease the volume.
ØTV
Used to return to the TV
mode when it is in
external input mode.
∏MENU
Used to display the on-
screen menu or return to
the previous menu.
”…
…
…
…
…
/ †
†
†
†
†
/ œ
œ
œ
œ
œ
/ √
√
√
√
√
Used to control the
cursor in the menu.
’DUAL I-II
Used to select the
sound mode.
➢Operation of remote control may be affected by bright
artificial light near to the TV.
Remote Control
(depending on the model)
The mains lead is attached to the rear of the television.
1Plug the mains lead into an appropriate socket.
➢The main voltage is indicated on the rear of the
television and the frequency is 50 or 60Hz.
2Press the button (On/Off) on the front (or side) of the
television.
3Press the POWER button on the remote control to
switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to “Channel - Auto Store” or “Channel - Manual
Store” on page 4.
➢If the television is initially powered on, several basic
customer settings proceed automatically. Refer to
“Setup - Plug & Play” on page 3.
4To switch the television off, press the button (On/Off)
on the front (or side) of the television.
Switching the Television On and Off
The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1Press the POWER button on the remote control while
viewing.
The television is in standby mode.
2To switch the television back on, simply press it again.
☛Do not leave the television in standby mode for long
periods of time (when you are away on holiday, for
example). Turn the television off by pressing the
button (On/Off) on the front (or side) of the television. It
is best to unplug the set from the mains and aerial.
Placing the Television in Standby Mode
Installing Batteries
Remove the cover. Install two AAA
size batteries, then replace the cover.
When the remote control does not
operate normally, check that the “+”
and “
-
” ends of the batteries are
inserted correctly or the batteries are
drained.
➢Do not mix battery types, i.e.
alkaline and manganese.
English - 3
◆Source List
You can switch between
viewing signal from
connected equipment, such
as a VCR, DVD, set-top box,
and the TV source
(broadcast or cable).
➢You can change the required external source simply
by pressing the VIDEO button on the remote
control. It might take a short period of time for
pictures to be switched. To return to the TV mode,
press the TV button on the remote control.
◆Edit Name
You can give a name to the
external source.
Input -
Source List / Edit Name
Move Enter Return
TV
AV1 -- - -
AV2 -- - -
S-Video -- - -
Component -- --
Source List
TV
Move Enter Return
AV1 : √
√
√
√
√
AV2 : √
√
√
√
√
S-Video : √
√
√
√
√
Component : √
√
√
√
√
Edit Name
TV
- - - -
VCR
DVD
Cable STB
Sat. STB
AV Recv.
DVD Recv.
Game
Camcorder
DVD Combo
2Select the appropriated
language by pressing the
… †or button. Press the
ENTER button.
The Check antenna input. is displayed.
➢If any language is not selected, the language menu
will disappear about 30 seconds later.
3Make sure that the antenna
is connected to the
television (refer to page 1).
Press the ENTER button.
The Auto Store menu is
displayed with Area
selected.
4Press the ENTER button again.
5Press the … †or button to select your area. Press the
ENTER button.
6To search the channels,
select Search by pressing
the …or †button. Press
the ENTER button.
7Press the ENTER button
again to start search
channels. To stop the
search, press the ENTER
button.
When the channel
searching has finished, the
Time menu is displayed
with selected.Clock
8Press the œ √or button to
move to the hour or minute.
Set the hour or minute by pressing the … †or button.
continued...
Check antenna input.
Enter Exit
Move Enter Return
Area : √
√
√
√
√
Search √
√
√
√
√
Auto Store
TV
ASIA W/EUROPE
CIS E/EUROPE
CHINA
HONGKONG U/K
AUSTRALIA
NZ/INDONESIA
SOUTH AFRICA
AMERICA
Search
Enter Return
Start
9When you have finished,
press the MENU button.
The Enjoy your watching is displayed, and then the
channel which has been stored will be activated.
Re-setting the Plug & Play
Method: MENU ➜… †/
( /Setup) ➜ ➜ENTER … †
(Plug & Play) ➜ENTER
Move Enter Return
Plug & Play √
√
√
√
√
Language : English
Time √
√
√
√
√
Child Lock √
√
√
√
√
Blue Screen : Off √
√
√
√
√
Melody : On √
√
√
√
√
Demonstration √
√
√
√
√
Setup
TV
Search
Enter Return
Stop
P 1 C-- ----- 102MHz
7 %
Enjoy your watching
Viewing the Menus
1Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input Picture Sound Channel, , , , and
Setup.
2Press the … †or button to select one of the icons.
Press the button to access the icon’s sub-menu.ENTER
3Press the … †or button to move to items in the menu.
Press the button to enter items in the menu.ENTER
4Press the … † œ √/ / / button to change the selected
items. Press the button to return to the previousMENU
menu.
5Press the EXIT button to exit from the menu.
Setup - Plug & Play
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1If the television is in standby
mode, press the POWER
button on the remote
control.
The Plug & Play is
displayed. It flickers for a
little while, and then
Language menu is
displayed.
continued...
Plug & Play Move Enter Return
Clock -- :- - am
Sleep Timer : Off
On Timer -- :- - am Off
Off Timer - -: - - am Off
On Timer Volume : 10
Reminder √
√
√
√
√
Time
TV
Move Enter
Language
English
Hindi

Produktspezifikationen

Marke: Samsung
Kategorie: Nicht kategorisiert
Modell: CS-29Z50MV

Brauchst du Hilfe?

Wenn Sie Hilfe mit Samsung CS-29Z50MV benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Nicht kategorisiert Samsung

Samsung

Samsung RH77J90407H Bedienungsanleitung

8 Oktober 2024
Samsung

Samsung CS-21M20ML Bedienungsanleitung

7 Oktober 2024
Samsung

Samsung HG65AJ690YK Bedienungsanleitung

4 Oktober 2024
Samsung

Samsung CS-21A11MH Bedienungsanleitung

4 Oktober 2024
Samsung

Samsung MR-EH01 Bedienungsanleitung

3 Oktober 2024
Samsung

Samsung CS21A551ML Bedienungsanleitung

2 Oktober 2024
Samsung

Samsung WMN8000SXT Bedienungsanleitung

29 September 2024
Samsung

Samsung IAB 146 2K Bedienungsanleitung

28 September 2024
Samsung

Samsung Guru 1200 Bedienungsanleitung

27 September 2024
Samsung

Samsung NA64H3010CK Bedienungsanleitung

26 September 2024

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-

DAS Audio

DAS Audio AX-112-5 Bedienungsanleitung

16 Oktober 2024
Ferplast

Ferplast Ergocomfort Freetime Bedienungsanleitung

16 Oktober 2024
AEG

AEG MECK52 Bedienungsanleitung

16 Oktober 2024
Makita

Makita UR012G Bedienungsanleitung

16 Oktober 2024
Stihl

Stihl HT 70 Bedienungsanleitung

16 Oktober 2024
Ernesto

Ernesto H14270 Bedienungsanleitung

16 Oktober 2024
IFM

IFM AC901S Bedienungsanleitung

16 Oktober 2024
Nedis

Nedis RFPOM120FBK Bedienungsanleitung

16 Oktober 2024
AEG

AEG E9KLCS01 Bedienungsanleitung

16 Oktober 2024
ART

ART ProChannel II Bedienungsanleitung

16 Oktober 2024