Samson MDA1 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Samson MDA1 (32 Seiten) in der Kategorie hifi systeem. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/32
Quick Start Guide
MDA1 Mono Active Direct Box
Copyright 2016, Samson Technologies Corp.
v3
Samson Technologies Corp.
45 Gilpin Avenue
Hauppauge, New York 11788-8816
Phone: 1-800-3-SAMSON (1-800-372-6766)
Fax: 631-784-2201
www.samsontech.com
If you want to dispose this product, do not mix it with general household waste. There is a separate
collection system for used electronic products in accordance with legislation that requires proper
treatment, recovery and recycling.
Private household in the 28 member states of the EU, in Switzerland and Norway may return their
used electronic products free of charge to designated collection facilities or to a retailer (if you
purchase a similar new one).
For Countries not mentioned above, please contact your local authorities for a correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and
recycling and thus prevent potential negative effects on the environment and human health.
EN FR DE ES IT
A direct insertion box, or DI box, converts unbalanced high impedance signals to balanced low imped-
ance signals. This provides the facility to run long cables without deterioration of the signal, as well as
connecting audio signals to a mixer’s microphoneinput.
Samson’s S-Max Direct Boxes combines premium sound circuitry with durable, roadworthy construction to
provide high-quality signal connection solutions for live and studio applications. The Samson MDA1Mono
Active Direct Box offers a variety of DI solutions for live sound and recording applications. You can con-
nect all kinds of audio signals like those from keyboards, drum machines, mixers, guitars, and outboard
signal processors.
Unlike passive direct boxes, the MDA1 is active, which means it has a power supply, so you can rely on
an even frequency response on any audio signal you connect to regardless of its output impedance. The
MDA1 is ideal for connecting instruments with passive pickups, which have very high-impedances, by
preserving the top end of the instrument’s frequency response. The balanced output provides a clean
signal, that is lesssusceptible to noise when compared to an unbalanced cable, which allows for running
longer lengths of cables.Another benefit from a balanced connection is CMR (Common Mode Rejection),
which provides cancellation of interference (hums and buzzes), while leaving the original signal pure.
With proper care and maintenance, your MDA1 will operate trouble-free for many years. Should your direct
box ever require servicing, a Return Authorization (RA) number must be obtained before shipping your unit
to Samson. Without this number, the unit will not be accepted. Please call Samson at 1-800-3SAMSON
(1-800-372-6766) for an RA number prior to shipping your unit. If your direct box was purchased outside
of the United States, contact your local distributor for warranty details and service information.
Introduction

Produktspezifikationen

Marke: Samson
Kategorie: hifi systeem
Modell: MDA1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Samson MDA1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung hifi systeem Samson

Bedienungsanleitung hifi systeem

Neueste Bedienungsanleitung für -Kategorien-