Salus RT 520 Bedienungsanleitung
Salus
Thermostat
RT 520
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Salus RT 520 (2 Seiten) in der Kategorie Thermostat. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
Button Functions
RT520 / RT520RF Thermostat RXRT520 Receiver
123456
78
9 10
1. MENU - enter the menu options, press and
hold for 3 sec to return to main screen or to
deactivate Boost Mode.
2. SELECT - conrm changes and enter menus.
3. DOWN - decrease the temperature and
move through the menus.
4. UP - increase the temperature and move
through menus.
5. BOOST - activate Boost Mode.
6. MANUAL - activate / deactivate Manual Mode.
7. ON - When in Manual Mode, ON will
turn the boiler on.
8. OFF - When in Manual Mode, OFF
will turn the boiler o.
9. AUTO - Receiver operates in automatic
mode according to the thermostat.
10. MANUAL - Receiver output is
controlled by the On/O slide switch.
Issue Date: January 2020
V0012
1 32
18
15
Introduction
The RT520 and RT520RF are the latest additions to SALUS’ tried and tested RT range of thermostat
heating controls. With a new on-board load compensation feature, they oer the most cost eective
fully compliant Boiler Plus solution on the market providing the homeowner with optimum eciency
and maximum heating control comfort. Available in both wired and wireless RF versions, the new RT520
series include all the features of the previous RT series with a larger more intuitive LCD display and a
handy new suite of additional operational and eciency functions.
Before use please read this manual carefully.
Product Compliance
Safety Information
This product complies with the essential requirements and other relevant provisions of the following EU Directives:
EMC 2014/30/EU, LVD 2014/35/EU, RED 2014/53/EU and RoHS 2011/65/EU. Full text of the EU Declaration of
Conformity is available on www.saluslegal.com
Use in accordance to national and EU regulations. Use the device as intended, keeping it in dry condition.
Product for indoor use only. Installation must be carried out by a qualied person in accordance to national
and EU regulations.
868.0-868.6MHz; <13dBm
Technical Specication
RT520 Thermostat RT520TX Thermostat
Thermostat supply 2 x AA alkaline batteries 2 x AA alkaline batteries
Thermostat rating max 3 (1) A -
OpenTherm terminals A / B -
Outputs
Voltage free
NC / NO / COM
terminals
-
Temperature range 5°C – 33.5°C 5°C – 33.5°C
Temperature accuracy 0.1°C or 0.5°C 0.1°C or 0.5°C
ErP control class V V
Radio frequency - 868 MHz
Dimension [mm] 118 x 95 x 26 [mm] 118 x 95 x 26 [mm]
RXRT520 Receiver
Receiver supply 230 V AC
Receiver rating max 16 (5) A
OpenTherm terminals A / B
Outputs Voltage free NO / COM terminals
Radio frequency 868 MHz
Dimension [mm] 96 x 96 x 26 [mm]
LCD Icon Description
RT520 Thermostat Terminals Description
RXRT520 Receiver Terminals Description
Terminal Description
B / A OpenTherm Communication Wire
NC Switched Live OFF
NO Switched Live ON
COM Common Terminal
Terminal Description
B / A OpenTherm Communication Wire
NO Switch Terminal
COM Common Switch Terminal
L; N Supply (230 V AC)
RT520 Wiring Diagram
OpenTherm - Hot Water
TPI, SPAN
TPI, SPAN
OPENTHERM
OPENTHERM
RT520TX Wiring Diagram
OpenTherm Power Up and Conguration
COM
NO
NC
RT520
Thermostat
RT520TX
Thermostat
L
L
NO
N
N
COM
RXRT520
Receiver
AC 230 V
RT520TX
Thermostat
L
L
BA
N
N
RXRT520
Receiver
AC 230 V
B A
RT520
Thermostat
Always ensure the AC mains power is switched off before installing or working on any
components (this includes replacing the batteries). Use only AA 1.5 V alkaline batteries in the
thermostat. Place the batteries into the battery slot located in the back of the thermostat. Do
not use rechargeable batteries.
Press MENU. Using UP or DOWN, adjust the
temperature and then
press SELECT.
OpenTherm Modulating Control is a method of control used by modern heating systems. Instead of
switching a boiler on and off at intervals, modulating control allows the amount of heat provided by the
boiler to be controlled to match the varying demand from the thermostat. This means the customer has
greater system efficiency, energy saving and room comfort from our heating controls.
Using UP or DOWN, navigate to
Hot Water submenu and
press SELECT.
RT520, RT520TX, RT520RF
Quick Guide
6
97
4
10
5
Using UP or DOWN, set the hour
and then press SELECT.
Using UP or DOWN, set the month
and then press SELECT.
Using UP or DOWN, set the
minutes and then press SELECT.
Using UP or DOWN, choose
the time format.
Using UP or DOWN, set the day and
then press SELECT.
Press SELECT to confirm.
1 32
After inserting the batteries, the
thermostat will power up.
Using UP or DOWN, choose your
language and then press SELECT.
Press SELECT.
16
13
17
14
Using UP or DOWN, select your
temperature accuracy.
Using UP or DOWN, enable or
disable DST (Daylight Saving Time).
Press SELECT to confirm.
Press SELECT to confirm.
When OpenTherm is connected, the
device software will automatically
adjust to the OpenTherm settings.
Press SELECT.
8
11
Using UP or DOWN, set the year
and then press SELECT.
Using UP or DOWN, select the
week format.
12
Press SELECT to confirm.
54
The text bar indicates that hot
water is in operation.
The thermostat will return to the
main screen. Press any button.
Please make the receiver connections and power the receiver before inserting the batteries
into the thermostat.
SALUS Controls plc
SALUS Controls
Units 8-10
Northfield Business Park
Forge Way
Parkgate
Rotherham
S60 1SD
Email: sales@salus-tech.com
SALUS Controls is a member of the Computime Group.
Maintaining a policy of continuous product development SALUS Controls plc reserve
the right to change specification, design and materials of products listed in this brochure
without prior notice.
www.salus-tech.com
For PDF Installation guide please go to www.salus-manuals.com
1
5
3A
7
2
6
3B
8
4
9
11
14
16
10
13
12
15
17
Text Bar
AM / PM
Day of the week (numeric)
Holiday Mode On
Temperature Unit
Cooling Mode On
Day of the week (alphabetic)
Manual Mode On
Clock
Heating Mode On
Wireless connection with the
receiver
Program number
Program indicator
Low battery status
Temperature measured / set
Service Mode On
Settings
Boost function
6
2
7
9
11
17
3A 3B
13
5
4
14
15
16
1
8
10
12
5
8
16
3A
3
9
5
3
55
6
12
15
8
6
3
2
1
11 1
14
1
1
7
1
3B
4
10
13
6
7
4
13A 13B
12 2
15
2
2
8
2
4
4
4
5
11
14
7
Press SELECT to confirm.
Press SELECT to confirm.
The thermostat will go to
the main screen.
Using UP or DOWN, select the
program type between: 5
Using UP or DOWN, enter the PIN
code number. Press SELECT to
confirm every digit.
Press SELECT.
Using UP or DOWN, select
TEST and press SELECT.
Individual (set a daily schedule).
Press SELECT to confirm.
Using UP or DOWN, select the due
date and then press SELECT.
Using UP or DOWN, set the
temperature and then
press SELECT.
Press SELECT.
Using UP or DOWN, select the TPI type you want to use.
Press SELECT.
Using UP or DOWN,
select ON or OFF.
Using UP or DOWN,
select ON or OFF.
Press MENU.
Press MENU.
Using UP or DOWN, select
the warning period and
then press SELECT.
Press MENU.
+2 (schedule for the working days
and for the weekend);
Press SELECT.
Using UP or DOWN, enter the
phone number. Press SELECT to
confirm every digit.
Using UP or DOWN, set the hour
and then press SELECT.
Using UP or DOWN, select the
Span value.
Press SELECT to confirm.
Press SELECT.
Press SELECT to confirm.
Press SELECT.
Using UP or DOWN, navigate to
Landlord submenu
and press SELECT.
Using UP or DOWN, select the
lock temperature and
then press SELECT.
Using UP or DOWN, navigate to
Pairing submenu and press SELECT.
The testing process takes
up to 10 minutes.
The red LED and the green
LED on the receiver
will begin to flash.
The pairing process takes
up to 10 minutes.
All (set one schedule for
the entire week)
Using UP or DOWN, select ON
and press SELECT.
Now you can check your
settings. If you want to
make a change, press UP
or DOWN on the relevant
screen.
Using UP or DOWN, set the
minutes and then press SELECT.
TPI (Time Proportional & Integral) is a self-learning, time-
proportional algorithm. TPI type of regulation ensures economical
system operation through more accurate temperature maintenance
during controlling process and limits overload conditions. In addition
to the exact and stable room temperature, the advantage of this
system is the minimization of energy consumption and significant
savings. RT520 offers 3 types of TPI control: 1. for radiator (6CPH); 2.
for underfloor heating (3CPH); 3. for electric heating (9CPH).
Optimum Stop calculates how
long the house will take to cool
down, then turns off the boiler at
the earliest possible moment, this
means the system is not running
when it’s not actually necessary. If
there is a sudden heat loss during
this period, then Optimum Stop will
be overridden to regain comfort
conditions.
Landlord settings is a pin code protected feature that allows the landlord to set a service reminder on the
thermostat that will warn the tenant when the boiler is due its annual service.
Span is the difference between the
measured temperature and the set
temperature.
In this mode, user can set the schedules for thermostat (temperature setpoints for specic periods of
time). Programmed schedules should use all time periods.
If you are using the RT520RF pack, the pairing between the thermostat and the receiver is
already done.
During the pairing process, please make sure the thermostat and the receiver are at least 1
meter from each other.
If you bought the RT520TX and RXRT520 separately or if you want to re-pair thermostat with
the receiver, make sure that the device is disconnected from the power supply and the switches
on the receiver have been set to AUTO and ON. Then connect the receiver to the power supply
and wait for the red LED to light steadily. Then switch to the OFF position and again to ON
position quickly. The red ashing LED will conrm entering the pairing mode.
Once devices are successfully
paired, LED on the receiver
will go solid red.
The device will be reset and will
start up automatically.
To reset the thermostat, press MENU,
DOWN and BOOST simultaneously
for 5 seconds.
Repeat the process for all time periods.
Once service mode has become active, the device will lock the set point temperature as set
by the installer/landlord. To unlock this device, the landlord needs to be contacted and the
boiler serviced. Landlord settings will not be reset.
Programming - Automatic Mode
RT520TX Thermostat Pairing with the ReceiverLandlord Settings
Factory Reset
Test the Pairing Process
ON
AUT O
OF F
MANUAL
ON
AUT O
OF F
MANUAL
Standard Power Up and Conguration
Please follow steps 1 to 17 from section .OpenTherm Power Up and Configuration
NOTE: Using UP or DOWN, you can choose either TPI (step 2) or SPAN (step 6). Choosing one
option excludes the other.
9 10A 10B
Press SELECT.Press SELECT.
Optimum Start is a selectable function which, depending on the ambient
room temperature, will start the boiler operation at the optimum time to
achieve the set-point temperature. It saves energy by only firing the boiler
for the minimum required time.
31 2
Using UP or DOWN, select PAIR
and press SELECT.
Press MENU. Using UP or DOWN, navigate to
Pairing submenu and press SELECT.
Produktspezifikationen
| Marke: | Salus |
| Kategorie: | Thermostat |
| Modell: | RT 520 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Salus RT 520 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Thermostat Salus
24 September 2024
9 September 2024
5 September 2024
3 September 2024
22 August 2024
22 August 2024
20 August 2024
19 August 2024
16 August 2024
15 August 2024
Bedienungsanleitung Thermostat
- Thermostat Basetech
- Thermostat Hama
- Thermostat Nedis
- Thermostat SilverCrest
- Thermostat Panasonic
- Thermostat Brennenstuhl
- Thermostat Cotech
- Thermostat Profile
- Thermostat Bosch
- Thermostat AEG
- Thermostat Siemens
- Thermostat ATAG
- Thermostat Taurus
- Thermostat Velleman
- Thermostat Devolo
- Thermostat Schwaiger
- Thermostat Alecto
- Thermostat Conrad
- Thermostat EMOS
- Thermostat Gira
- Thermostat HomeMatic
- Thermostat Renkforce
- Thermostat Technoline
- Thermostat TFA
- Thermostat Schneider
- Thermostat Corberó
- Thermostat GE
- Thermostat King
- Thermostat Avidsen
- Thermostat Elro
- Thermostat Gigaset
- Thermostat Tesla
- Thermostat Max
- Thermostat Perel
- Thermostat Nexa
- Thermostat Vasco
- Thermostat Fenix
- Thermostat Westfalia
- Thermostat Vaillant
- Thermostat Honeywell
- Thermostat Remko
- Thermostat Junkers
- Thermostat RADEMACHER
- Thermostat AVM
- Thermostat ELV
- Thermostat TP-Link
- Thermostat Zehnder
- Thermostat Lux
- Thermostat De Dietrich
- Thermostat Netatmo
- Thermostat Theben
- Thermostat Tado
- Thermostat Remeha
- Thermostat Saunier Duval
- Thermostat Stiebel Eltron
- Thermostat Truma
- Thermostat Viessmann
- Thermostat Xavax
- Thermostat Hager
- Thermostat Dimplex
- Thermostat Buderus
- Thermostat Noma
- Thermostat JUNG
- Thermostat Boneco
- Thermostat Hunter
- Thermostat Baxi
- Thermostat Wolf
- Thermostat Nest
- Thermostat Magnum
- Thermostat HQ
- Thermostat Itho Daalderop
- Thermostat Carrier
- Thermostat Tylö
- Thermostat Busch-Jaeger
- Thermostat SPC
- Thermostat Gree
- Thermostat Sygonix
- Thermostat Orbis
- Thermostat Econo-heat
- Thermostat EQ-3
- Thermostat RWE
- Thermostat Eberle
- Thermostat BTicino
- Thermostat Bulex
- Thermostat Danfoss
- Thermostat Delta Dore
- Thermostat Fantini Cosmi
- Thermostat Grässlin
- Thermostat Heimeier
- Thermostat IMIT
- Thermostat Klafs
- Thermostat Oventrop
- Thermostat Seitron
- Thermostat EVE
- Thermostat Ariston Thermo
- Thermostat Elektrobock
- Thermostat Intertechno
- Thermostat Mikoterm
- Thermostat Ferroli
- Thermostat Carel
- Thermostat Daikin
- Thermostat Vemer
- Thermostat EnerGenie
- Thermostat Oregon Scientific
- Thermostat Finder
- Thermostat Homematic IP
- Thermostat Levoit
- Thermostat EQ3
- Thermostat Google
- Thermostat Somfy
- Thermostat Berker
- Thermostat Elgato
- Thermostat Elco
- Thermostat Devi
- Thermostat Drayton
- Thermostat Drayton Erie
- Thermostat Easy Timer
- Thermostat EasyTemp
- Thermostat Eliwell
- Thermostat Emerson
- Thermostat Emmeti
- Thermostat Enda
- Thermostat Eneco
- Thermostat Eqiva
- Thermostat Essent
- Thermostat Etherma
- Thermostat Eurotronic
- Thermostat Extraflame
- Thermostat Frico
- Thermostat Go Green
- Thermostat Helios (Amfra)
- Thermostat Hornbach
- Thermostat Hugo Muller
- Thermostat ICY
- Thermostat IR-V
- Thermostat Itho
- Thermostat Johnson Control
- Thermostat Landis Gyr
- Thermostat Levica
- Thermostat Lowes
- Thermostat Muller
- Thermostat Nefit
- Thermostat Niko
- Thermostat Nobo
- Thermostat OJ ELECTRONICS
- Thermostat Otio
- Thermostat Plieger
- Thermostat Plugwise
- Thermostat Radson
- Thermostat THERMAFLEX
- Thermostat Thermy
- Thermostat ACV
- Thermostat Hive
- Thermostat ThermoSmart
- Thermostat UPM
- Thermostat VDH
- Thermostat Wachendorff
- Thermostat Watts
- Thermostat Webasto
- Thermostat Weishaupt
- Thermostat Worcester-Bosch
- Thermostat Yokis
- Thermostat Z-Wave
- Thermostat Vimar
- Thermostat TrickleStar
- Thermostat Horstmann
- Thermostat Computherm
- Thermostat Heatit
- Thermostat POER
- Thermostat H-Tronic
- Thermostat PECO
- Thermostat Chacon
- Thermostat Emko
- Thermostat Fibaro
- Thermostat Heatmiser
- Thermostat Crestron
- Thermostat ORNO
- Thermostat Optima
- Thermostat HomePilot
- Thermostat Krone
- Thermostat ChiliTec
- Thermostat Arnold Rak
- Thermostat Ouellet
- Thermostat Jumo
- Thermostat Wallair
- Thermostat Maico
- Thermostat Ecobee
- Thermostat Tellur
- Thermostat STI
- Thermostat Cepra
- Thermostat Tru Components
- Thermostat Qubino
- Thermostat Gewiss
- Thermostat Warmup
- Thermostat Sinustec
- Thermostat Rose LM
- Thermostat Agpo Ferroli
- Thermostat Amfra
- Thermostat Aube
- Thermostat AWB
- Thermostat Wattio
- Thermostat Brink
- Thermostat 2Heat
- Thermostat Bryant
- Thermostat Veria
- Thermostat Innogy
- Thermostat ELKO
- Thermostat MundoControl
- Thermostat Bearware
- Thermostat GENERAL Life
- Thermostat Oreg
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
7 Oktober 2024
5 Oktober 2024
5 Oktober 2024
5 Oktober 2024
5 Oktober 2024
4 Oktober 2024
3 Oktober 2024
2 Oktober 2024
2 Oktober 2024