Saitek Pro Flight Rudder Pedals PC Bedienungsanleitung

Saitek Regeln Pro Flight Rudder Pedals PC

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Saitek Pro Flight Rudder Pedals PC (5 Seiten) in der Kategorie Regeln. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/5

1 of 5 19/12/2006 16:43

Pro Flight Rudder Pedals

USER MANUAL

GETTING STARTED

Introduction

The Saitek Pro Flight Rudder Pedals are solid 3-axis rudder pedals designed to maximise realism by enabling foot control of the

rudder function in ﬂightsimulation PCGames. The Pro Flight Rudder Pedals work with any Saitek PC Flight Stick, but are designed

speciﬁcally to complement the Saitek X52 Flight Control System to enhance ﬂight sim experiences.

Features:

Self-centering pedals with adjustable tension

Silent, smooth action for optimum control and precision

Toe brakes

Tension adjustment - choose resistance to suit the way you ﬂy

Pedals adjust to ﬁt all sizes and include non-slip materials

High quality, solid, construction for long life

Advanced SST Programming

Installation for Users of Windows® XP and Windows XP64

A) Drivers Only For Typical Users

With your computer switched on, close down any programs that are currently running and insert the Saitek Smart

Technology CD into your CD-ROM drive.

When the Introduction Screen appears, click Install Software to continue. If the CD does not run automatically, select Start

from the Windows® Taskbar,then Run and type D:\Setup.exe and click OK - where D:\ is letter of your CD-ROM drive.

When the Welcome screen appears, click Next to continue.3. After reading the Disclaimer, select the I accept the terms of the Disclaimer option and click Next to continue.4.At the Driver Setup screen, if you haven't already done so, plug the USB cable into one of your computer's USB ports and

click on Next.

When the Saitek Controller test screen appears, try out your rudder pedals’controls to show that they are working properly.

When you have ﬁnished, click OK

At the Software Setup screen, select Do not install the SST Programming Software and click Next. The Programming

Software can be installed at a laterdate by following instruction (B). below

At the Registration screen, select Check this box to register now and follow the on-screen instructions, or you can choose

to select this option later.

Click on Finish to complete the installation.9.

B) Drivers and Programming Software For Advanced Users

2 of 5 19/12/2006 16:43

Follow points 1 - 6 of the install procedure in A), then at the Software Setup screen, select Install the SST Programming Software

and click Next. In the following Software Setup screen, click Next and follow the on-screen instructions. At this point you will be

asked to install such features as the Saitek Magic Mouse, HID-compliant mouse, Saitek Magic Keyboard and HID Keyboard

Device (these are what XPcalls the various elements of your Saitek controller). Continue to click on Next and Finish to accept the

installation until the Registration screen appears. At the Registration screen, select Check this box to register now and follow the

on-screen instructions, or do not select this option and register later. Upon completion of the installation, you have the option to

Run Proﬁle Editor, which will give you a view of the 3D programming environment. If you do not wish to see the Proﬁle Editor at

this point, just uncheck the box and click on Finish to complete the installation.

Installation for Users of Windows® 2000

A) Drivers Only For Typical Users

With your computer switched on, close down any programs that are currently running and insert the Saitek Smart

Technology CD into your CD-ROM drive.

When the Introduction Screen appears, click Install Software to continue. If the CD does not run automatically, select Start

from the Windows® Taskbar,then Run and type D:\Setup.exe and click OK - where D:\ is letter of your CD-ROM drive.

When the Welcome screen appears, click Next to continue.3. After reading the Disclaimer, select the I accept the terms of the Disclaimer option and click Next to continue.4.At the Device Driver Installation screen, click on Next and follow the on-screen in structions.5. When prompted, plug the USB cable into one of your computer's USB ports and click on Conﬁgure. 6.

When the Controller Properties screen appears, click Next to view the Test screen. 7. Now try out your rudder pedals’controls to show that they are working properly. When you have ﬁnished, click OK.8.At the Programming Software screen, select Typical User and click Next.9. At the Registration screen, select Register and follow the on-screen instructions or select Register Later and click Next. 10.Click on Finish to complete the installation.11.

B) Drivers and Programming Software For Advanced Users

Follow points 1 - 8 of the install procedure in A), then at the Programming Software screen, select Advanced User and click

Next.

At the Programmable Controller Drivers screen, click Update and follow the on-screen instructions.2. Then at the Installation of programming software successful screen, click Next.3. At the Registration screen, select Register and follow the on-screen instructions or select Register Later and click Next. 4.Upon completion of the installation, you have the option to Run Proﬁle Editor, which will give you a view of the 3D

programming environment. If you do not wish to see the Proﬁle Editor at this point, just uncheck the box and click on Finish

to complete the installation.

IMPORTANT INFORMATION

A Word on Driver Updates From time to time there may be updates to the driver and programming software for this product. You

can check for the latest software updates by visiting the Saitek website and clicking on Downloads. A drop down menu will appear.

Select Drivers and Software.

For Windows® XPand XP64 users;

Dynamic updates If you have downloaded new drivers from Windows update and want to use SST programming software, you will

need to obtain an updated version of thesoftware. To obtain the new version, open the Game Controllers icon in Control Panel,

select the controller in the window and click Properties. At the top of theProperties window click the About tab and you will see a

link that says Click here to download the SST Programming Software. Click on the link and Windowswill give a download prompt

asking if you want to open the ﬁle or save it. Choose to save it to your preferred location on your computer's hard disk and the ﬁle

will start downloading. Once the ﬁle has downloaded, ﬁnd it on your hard disk and double click on it to install the programming

software.

Enabling Your Controller in Game

Most games support game controllers, which you can enable by using a [control] options menu within the Main Menu of the game

itself. If you are having trouble working out how to do this or if you're unsure whether the game being used supports game

controllers, please refer to the user manual for that gamefor more help.

How to Test and adjust your controller

You can test your controller at any time by Clicking on Start, then Settings and selecting Control Panel in Windows (XP users may

only need to click on Start and then Control Panel). Look for an icon called either Game Controllers or Gaming Options (XP users

may have to click Printers and Other Hardware ﬁrst).

Open the Game Controllers/Gaming Options window - the Saitek Pro

Flight Rudder pedals should appear. Click on Properties to bring upthe

test screen. Click on the Test tab. Moving your rudder pedals should

result in a response in this screen; if there is a response you know that

the rudder pedals are functioning correctly.

Click on the Deadzones tab of the Properties window. You c

the deadzones (ie, the distance of pedal travel which doesn’t

corresponding rudder movement in-game) of the Pro Flight R

Pedals by clicking on the deadzone axes and dragging the d

indicators to the desired level. To test the new settings click

tab or try out by playing a ﬂight sim game.

3 of 5 19/12/2006 16:43

PROGRAMMING YOUR SAITEK CONTROLLER WITH SAITEK SMART

TECHNOLOGY PROGRAMMING SOFTWARE

Introducing Saitek Smart Technology Programming Software

Saitek Smart Technology Programming Software (SST) is the software Saitek supplies to conﬁgure your Saitek controller for

enhanced functionality. SST delivers a powerful set of features, allowing you to program your device with the ultimate conﬁguration

for total interaction. Despite a level of sophistication previously unseen in the market, and because of the Saitek Smart Technology

inside, the software remains simple and intuitive to use. For a complete guide on how to program your Saitek controller, visit the

Saitek website at www.saitek.com.

Features of Smart Technology Programming Software:

Quick and easy setup in any game

Personalize the controller settings for your favorite games

Conﬁgure your controller with an on-screen 3D model and interface

Multiple setup option for each controller - ideal if a controller is used by several people

Program special moves with sophisticated timing features

Special game setups available as 'Proﬁles' from the Saitek website and on the Smar t Technology CD

Download the latest version of Saitek Smart Technology software from the Saitek website

What is a Proﬁle

A Proﬁle is a custom setup for improved gameplay - consisting of a set of commands that are pre-assigned to the buttons or axes

of your controller. There are pre-written Proﬁles available on the Product Companion Disk that accompanies this device. Please

also check the Saitek Website (www.saitek.com) for new proﬁles which will be added for Pro Flight Rudder Pedals.

How Do I Program My Controller?

After getting to know your controller, you can start creating your own personal Proﬁles with the Saitek Smart Technology

programming software (SST). This software has virtually unlimited programming capabilities and allows you to customize the

controller to your exact gaming needs. The Proﬁle Editor allows you to program the buttons on your controller to perform diﬀerent

actions within your games - this is especially useful if the game you are using does not have its own screen that allows

reconﬁguring of your controller.

Getting Started

Double-click on the Saitek Smart Technology icon the install left on your desktop. 1. In the Proﬁle Editor, choose the control to which you wish to assign a keyboard command. You do this by left-clicking on

the control's cell in the control list on the right of the screen.

With the cursor ﬂashing, type in the key commands and then click on the green tick mark when complete.3.Repeat this procedure for all the buttons you would like to program and then click File, Save at the top of the Proﬁle Editor

window.