Ryobi One+ RPS18 Bedienungsanleitung

Ryobi Schleifmaschine One+ RPS18

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ryobi One+ RPS18 (16 Seiten) in der Kategorie Schleifmaschine. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
RPS18
2Original Instructions
IMPORTANT!
It is essential that you read the
instructions in this manual before
assembling, operating, and maintaining
the product.
Subject to technical modiîš¿cations.
Safety, performance, and dependability
have been given top priority in the design
of your palm sander.
INTENDED USE
The palm sander is intended to be
used only by adults who have read and
understood the instructions and warnings
in this manual, and can be considered
responsible for their actions.
The product is intended for sanding and
îš¿nishing metal, wood, plastic or similar
materials using the abrasive pads or
sheets provided. The product should only
be used in well ventilated areas.
The product is designed for dry sanding
only. Do not use for wet sanding.
The product is intended for consumer
use only.
Do not use the product for any other
purpose. Use of the product for
operations different from intended could
result in a hazardous situation.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING! Read all safety
warnings, instructions, illustrations
and specifications provided with
this power tool. Failure to follow all
instructions listed below may result in
electric shock, îš¿re and/or serious injury.
Save all warnings and instructions for
future reference.
The term “power tool’’ in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
â– Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
â– Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
â– Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
ELECTRICAL SAFETY
â– Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodified plugs and
matching outlets will reduce risk of
electric shock.
â– Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and
refrigerators. There is an increased
risk of electric shock if your body is
earthed or grounded.
â– Do not expose power tools to rain
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
â– Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged
or entangled cords increase the risk
3
Original Instructions
of electric shock.
â– When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
â– If operating a power tool in a
damp location is unavoidable, use
a residual current device (RCD)
protected supply. Use of an RCD
reduces the risk of electric shock.
PERSONAL SAFETY
â– Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you
are tired or under the influence of
drugs, alcohol or medication. A
moment of inattention while operating
power tools may result in serious
personal injury.
â– Use personal protective
equipment. Always wear eye
protection. Protective equipment
such as a dust mask, non-skid safety
shoes, hard hat or hearing protection
used for appropriate conditions will
reduce personal injuries.
â– Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to
power source and/or battery pack,
picking up or carrying the tool.
Carrying power tools with your finger
on the switch or energising power
tools that have the switch on invites
accidents.
â– Remove any adjusting key or
wrench before turning the power
tool on. A wrench or a key left
attached to a rotating part of the
power tool may result in personal
injury.
â– Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
â– Dress properly. Do not wear
loose clothing or jewellery. Keep
your hair and clothing away from
moving parts. Loose clothes,
jewellery or long hair can be caught
in moving parts.
â– If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of dust collection can reduce
dust-related hazards.
â– Do not let familiarity gained from
frequent use of tools allow you to
become complacent and ignore
tool safety principles. A careless
action can cause severe injury within
a fraction of a second.
POWER TOOL USE AND CARE
â– Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
â– Do not use the power tool if the
switch does not turn it on and
off. Any power tool that cannot be
controlled with switch is dangerous
and must be repaired.
â– Disconnect the plug from the
power source and/or remove the
battery pack, if detachable, from
the power tool before making
any adjustments, changing
accessories, or storing power
tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
â– Store idle power tools out of


Produktspezifikationen

Marke: Ryobi
Kategorie: Schleifmaschine
Modell: One+ RPS18

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ryobi One+ RPS18 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Schleifmaschine Ryobi

Bedienungsanleitung Schleifmaschine

Neueste Bedienungsanleitung für -Kategorien-