Ryobi One+ PCL460 Bedienungsanleitung

Ryobi niet gecategoriseerd One+ PCL460

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Ryobi One+ PCL460 (24 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war fĂŒr 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/24
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
ONE+ 18V 6 in. TWO SPEED
RANDOM ORBIT BUFFER
POLISSEUSE ORBITALE SPÉCIALE À DEUX
VITESSES DE 15,24 cm (6 po) ET ONE+ DE 18 V
LIJADOR ORBITAL ALEATORIO DE DOS
VELOCIDADES DE 18 V ONE+ Y 15,24 cm (6 pulg.)
PCL460
TABLE OF CONTENTS
****************
General Power Tool Safety
Warnings ........................................ 2-3
Buffer/Polisher Safety Warnings..... 3-4
Symbols 4 ..............................................
Assembly 5 ............................................
Operation 5-7 ........................................
Maintenance 7 .......................................
Illustrations 9 .........................................
Parts Ordering and
Service ................................Back page
TABLE DES MATIÈRES
****************
Avertissements de sĂ©curitĂ© gĂ©nĂ©rales
relatives aux outils Ă©lectriques ....... 2-3
Avertissements de sĂ©curitĂ©
relatifs lustreuse/polisseuse ...............4
Symboles 5 ............................................
Assemblage 6 ........................................
Utilisation 6-8 .......................................
Entretien 8 .............................................
Illustrations) 9 ........................................
Commande de piùces
et dépannage ....................Page arriÚre
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad para
 herramientas elĂ©ctrica .................... 2-3
Advertencias de pulidora/
enceradora .........................................4
Símbolos 5 ............................................
Armado 6 ...............................................
Funcionamiento 6-8 ..............................
Mantenimiento 8 ....................................
Illustraciones 9 ......................................
Pedidos de piezas
y servicio ....................... PĂĄg. posterior
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
2 – English
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, ïŹre and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of ïŹ‚ammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. UnmodiïŹed plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is un-
avoidable, use a ground fault circuit interrupter (GFCI)
protected supply. Use of a GFCI reduces the risk of
electric shock.
Use this product only with batteries and chargers
listed in tool/appliance/battery pack/charger correla-
tion supplement 987000-432.
PERSONAL SAFETY
Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not use
a power tool while you are tired or under the inïŹ‚uence
of drugs, alcohol or medication. A moment of inatten-
tion while operating power tools may result in serious
personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as a dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your ïŹnger on the switch or
energising power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can
be caught in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe
injury within a fraction of a second.
Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
3 – English
GENERAL POWER TOOL SAFETY WARNINGS
BUFFER/POLISHER SAFETY WARNINGS
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting tool may
contact hidden wiring. Cutting tool contacting a “live”
wire may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.
Know your power tool. Read operator’s manual
carefully. Learn its applications and limitations, as
well as the speciïŹc potential hazards related to this
power tool. Following this rule will reduce the risk of
electric shock, ïŹre, or serious injury.
Always wear eye protection with side shields marked
to comply with ANSI Z87.1 when assembling parts,
operating the tool, or performing maintenance.
Following this rule will reduce the risk of serious personal
injury.
Protect your lungs. Wear a face or dust mask if the
operation is dusty. Following this rule will reduce the risk
of serious personal injury.
Protect your hearing. Wear hearing protection during
extended periods of operation. Following this rule will
reduce the risk of serious personal injury.
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing
accessories. Following this rule will reduce the risk of
electric shock, ïŹre, or serious personal injury.
Do not place battery tools or their batteries near
ïŹre or heat. This will reduce the risk of explosion and
possibly injury.
Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped
or received a sharp blow. A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
Batteries can explode in the presence of a source
of ignition, such as a pilot light. To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open ïŹ‚ame. An exploded battery can
propel debris and chemicals. If exposed, ïŹ‚ush with water
immediately.
Do not charge battery tool in a damp or wet location.
Do not use, store, or charge battery packs or products
other condition that may affect the power tool’s opera-
tion. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained
power tools.
Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of ïŹre when used with
another battery pack.
Use power tools only with speciïŹcally designated bat-
tery packs. Use of any other battery packs may create
a risk of injury and ïŹre.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make
a connection from one terminal to another. Shorting
the battery terminals together may cause burns or a ïŹre.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, ïŹ‚ush with water. If liquid contacts eyes, ad-
ditionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or
modiïŹed. Damaged or modiïŹed batteries may exhibit
unpredictable behavior resulting in ïŹre, explosion or risk
of injury.
Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to ïŹre or temperature
above 265° F may cause explosion.
Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
speciïŹed in the instructions. Charging improperly or at
temperatures outside the speciïŹed range may damage
the battery and increase the risk of ïŹre.
SERVICE
Have your power tool serviced by a qualiïŹed repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.

Produktspezifikationen

Marke: Ryobi
Kategorie: niet gecategoriseerd
Modell: One+ PCL460

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ryobi One+ PCL460 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung niet gecategoriseerd Ryobi

Ryobi

Ryobi One+ P505 Bedienungsanleitung

6 September 2024
Ryobi

Ryobi One+ PBLRS01 Bedienungsanleitung

6 September 2024
Ryobi

Ryobi One+ PBLJS01 Bedienungsanleitung

6 September 2024
Ryobi

Ryobi RB61G Bedienungsanleitung

6 September 2024
Ryobi

Ryobi One+ PSBDG01 Bedienungsanleitung

6 September 2024
Ryobi

Ryobi One+ RB102G Bedienungsanleitung

6 September 2024
Ryobi

Ryobi One+ PSBCK102 Bedienungsanleitung

6 September 2024
Ryobi

Ryobi One+ PCL601 Bedienungsanleitung

6 September 2024
Ryobi

Ryobi One+ PCL460 Bedienungsanleitung

6 September 2024
Ryobi

Ryobi STM501 Bedienungsanleitung

6 September 2024

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung fĂŒr -Kategorien-

APC

APC C2C Bedienungsanleitung

18 September 2024
APC

APC AP7868 Bedienungsanleitung

18 September 2024
APC

APC P8VNTG Bedienungsanleitung

18 September 2024
APC

APC P62 Bedienungsanleitung

18 September 2024
APC

APC AP7898 Bedienungsanleitung

18 September 2024
Hama

Hama Magnet 00183283 Bedienungsanleitung

18 September 2024
IFM

IFM TD2211 Bedienungsanleitung

18 September 2024
Coyote

Coyote C1CH36FS Bedienungsanleitung

18 September 2024
IFM

IFM AC001S Bedienungsanleitung

18 September 2024
Dimplex

Dimplex SRX120EM Bedienungsanleitung

18 September 2024