Russound IW-620 Bedienungsanleitung

Russound Lautsprecher IW-620

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Russound IW-620 (6 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war fĂĽr 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/6
ARCHITECTURAL SPEAKERS
Guide To Products and Installation
Thank you for choosing your speakers from Russound’s Architectural Series of premium loudspeakers.
They’ve been designed, manufactured and tuned with great care so your listening experience is as
rewarding as possible. This range of speaker solutions provides excellent choices for any application
- from budget-minded to audio-purist. They provide perfect choices for multi-room audio, home
theater, primary listening and other applications.
These new speakers incorporate the latest advances in material technologies as well as engineering
innovation and design excellence. For example, on the step-up models, you’ll nd the Swiftlock™ tool-
less installation feature to be a brilliant means to accomplish secure installations simply and easily.
We wish you many years of musical enjoyment from your Russound speakers, indoors, outdoors or
wherever your entertainment needs take you.
IW-620
2Russound Architectural Series of In-Wall Loudspeakers
Speaker Placement in the Room
Your speaker’s low frequency bass reproduction is “helped” when speakers are
placed close to a wall or corner. This is known as the boundary eect. Each
nearby surface helps to amplify the perceived sound output. Avoid placing
one speaker in a corner and another on a long at surface. Better audio
performance will result if both speakers are placed in similar positions and face
a similar type of surface.
Refer to the details below for sample In-wall placement options.
• Good placement for serious listening: Stereo pair In-wall. On the long wall
of a rectangular room, centered on the listening area.
• Best placement for serious listening: Stereo pair In-wall. On the short wall
of a rectangular room, centered on the listening area.
• Good placement for background listening: Stereo pair behind, above or to
the sides of the main listening area.
• Surround sound: The multiple surround locations can all be made
to work as long as the speakers are properly positioned so that the
listener is equidistant from the rear speakers - so they get a balanced
representation of the audio.
Speaker Wire
What kind to use: We recommend using premium, CL-2 rated, 16 to 14 gauge
multi-stranded wiring for amplier-to-speaker connections.
Selecting the proper gauge: Gauge relates to the size of the wire. The
bigger the gauge, the smaller the wire diameter. The wire gauge needed is
determined by the distance between your amplier/receiver and the speakers.
The longer the wire run, the heavier the gauge needed. for wire runs up to
150’, use at least 16 gauge wire. For runs100’ to 200’, use at least 14 gauge.
Note: Each speaker wire is like 2 wires in one. It is important that your wiring
process has the same + and - relationship between your amp and your
speakers for best musical performance. Keeping your speaker connections
consistent. The standard colors on the terminals are red Positive (+) and black
Negative (-). If the wire has transparent insulation, one conductor will be
copper-colored (+) and the other silver-colored (-). If the wire has an opaque
insulation, the conductors are dierentiated by a series of ribs or grooves, a
stripe, or dotted line on one conductor. Use and mark these as the Positive
(+) conductor.
Installation Tips:
• Some ceilings and walls have pipes, ducts or AC wiring in the area. Local
building codes may dictate the type of wire you need to use. Only wire
that is rated for use in walls/ceilings should be used for that purpose.
• Speaker Wire Paths
• Avoid running speaker wires close to house electrical wiring for
any distance. If you have to run them to the same locations, leave
two feet between the wiring. Speaker wires should cross electrical
wiring at a 90° angle.
• Label speaker wires at each end with Left and Right and room
location.
• Impedance Matching for Ampliers and Speakers
Not all amps/receivers can safely operate two sets of speakers at
once. If you want to use more than one pair of speakers at a time,
consider the speaker’s impedance and the rating of the amp /
receiver you’re using.
Use and Placement
For each room, think about what kind of listening is going to be going on
there most of the time. In a Great Room, you want to be bathed in smooth
even coverage through the room. In a Home Theater set-up, you want the
breadth and depth of the imaging to be as much like that in a movie theater
as you can.
If your Russound speakers are going to be your primary listening source in a
room, you need to consider some other factors to ensure proper imaging. The
term “stereo imaging” refers to a speaker system’s ability to project music so
that it sounds like the performers are in a three-dimensional space between
the speakers.
Russound’s Architectural Series Speakers are designed to provide full-
sounding dispersion out to well-o the primary axis, so that listeners
throughout the room are treated to full, rich music reproduction.
PREPARATION / WIRING INFO & SPEAKER PLACEMENT
-+-+
Typical usage of speaker wire conductors
Good Placement
Background Listening
Best Placement
Serious Listening
Good Placement
Serious Listening
Home Theater
Surround Sound
Russound Architectural Series of In-Wall Loudspeakers3
Additional Tips / Considerations
• Try to run speaker wires after AC wiring is in so you can separate the wires,
avoiding induced noise caused by close parallel positioning of the two
wire types.
• Secure speaker wires in place against a stud along vertical runs. Do not
pierce the wire insulation. Allow a bit of slack for expansion of building
materials.
• Route horizontal wire runs through holes drilled in studs at roughly equal
heights.
• Speakers should not be installed until the wallboard is in place. In the
meantime, leave several feet of wire coiled up and secured to the back
side of the mounting frame. Excess length can be removed during nal
assembly.
• When installing the drywall, make sure the speaker cutout hole doesn’t
extend farther than 1/4” (0.6 cm) from the inside of the mounting frame.
• Terminate the wires in an outlet box attached to a stud or retrot
junction box at the exit location. Use an outlet plate with speaker wire
terminations.
• After the drywall is secured and nished, install the speakers as we’ve
described.
Painting the Speaker Grille
Russound Architectural Speaker Grilles have a designer white nish that can
be painted with ordinary latex paint. Remove the speaker grille from the
speaker before painting.
1. Remove the magnetic speaker grille and carefully remove the scrim cloth
from the grille and set aside.
2. Paint the grille. Russound recommends diluting the latex paint with water
4:1 or 5:1 proportionally. Due to the ne mesh openings, using several layers of
a thinner paint spray is recommended rather than using a single, thicker coat.
A thick coat is likely to clog the speaker grille openings.
3. While the paint is still wet on the grille, and the grille is not attached to the
frame, use a gentle burst of compressed air against the outside surface to clear
the ne holes in the mesh.
4. After the paint has thoroughly dried, re-attach the scrim cloth.
Retrot Installation
Locate existing pipes, duct work, and AC wiring before cutting any holes.
1. Center the cardboard template between adjacent joists, avoiding all
wiring, pipes, duct work, and lightly mark the outline with a pencil.
Then use a keyhole/drywall saw or motorized spiral-cut tool to make
the opening.
2. Score the outline of the template with a utility knife to prevent
chipping. If dealing with lath and plaster or thick paneling, drill 1”
(2.5 cm) holes in several places around the pencil outline. Use a
ne-toothed keyhole saw or hacksaw blade with slow strokes to saw
through and remove the inner surface.
PREPARATION / SPEAKER PLACEMENT
Retrot Installation
Score template outline Cut out opening
SpeakerScrim ClothGrille
Speaker Assembly
Do not attach the grille
until the speaker has
been connected and
secured in the wall.

Produktspezifikationen

Marke: Russound
Kategorie: Lautsprecher
Modell: IW-620

Brauchst du Hilfe?

Wenn Sie Hilfe mit Russound IW-620 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Russound

Russound

Russound 5B55B Bedienungsanleitung

2 September 2024
Russound

Russound OutBack 5B65 Bedienungsanleitung

10 Juni 2024
Russound

Russound IC-605 Bedienungsanleitung

10 Juni 2024
Russound

Russound AW70V6 Bedienungsanleitung

10 Juni 2024
Russound

Russound IC-620 Bedienungsanleitung

10 Juni 2024
Russound

Russound IW-620 Bedienungsanleitung

10 Juni 2024
Russound

Russound RS-F610T Bedienungsanleitung

10 Juni 2024
Russound

Russound IC-820 Bedienungsanleitung

10 Juni 2024
Russound

Russound OutBack 5B65S Bedienungsanleitung

10 Juni 2024
Russound

Russound IC-610T Bedienungsanleitung

10 Juni 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024