Russound ALT-126R Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Russound ALT-126R (12 Seiten) in der Kategorie Regeln. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
ALT-126R
Volume Control
Installation Manual
2Russound ALT-126R Installation Manual
Safety Instructions
1. Read Instructions - All the safety and operating instructions should be read before the
appliance is operated.
2. Retain Instructions - The safety and operating instructions should be retained for future
reference.
3. Heed Warnings - All warnings on the appliance in the operating instructions should be
adhered to.
4. Follow Instructions - Follow all operating and user instructions.
5. Water and Moisture - The appliance should not be used near water; for example, near a
bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
6. Wall Mounting - The appliance should be mounted to a wall as recommended by the
manufacturer.
7. Heat - The appliance should be situated away from heat sources such as radiators, heat
registers, stoves, or other appliances (including ampli ers) that produce heat.
8. Power Sources - The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
9. Grounding or Polarization - Precaution should be taken so that the grounding or polarization
means of an appliance is not defeated.
10. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not
spilled into the enclosure through the openings.
11. Damage Requiring Ser vice - The appliance should be ser viced by quali ed ser vice personnel when:
The power supply cord or the plug has been damaged; Objects have fallen, liquid has been
spilled into the appliance; The appliance has been exposed to rain; The appliance does
not appear to operate normally; or The appliance has been dropped or the enclosure is
damaged.
12. Servicing - The user should not attempt to service the appliance beyond that described in the
operating instructions. All other servicing should be referred to quali ed service personnel.
13. Care – From time to time you should wipe o the front panel with a soft dry cloth.
SAFETY INSTRUCTIONS
3
Russound ALT-126R Installation Manual
PRODUCT OVERVIEW
Introduction
The ALT-126R UltraMatch™ Volume Control is a wall-mounted standard or Decora® style stereo
speaker-level 12-step attenuator. It connects between the speaker outputs of an ampli er/receiver
and a pair (or multiple pairs) of speakers. The ALT-126R adjusts volume level by attenuating the
ampli er signal output of the ALT-126R to the speakers. It is manufactured using a high-quality
autoformer design for long life, excellent frequency response, no heat build-up, and maximum
power transfer from the ampli er to the speakers.
The UltraMatchâ„¢ designation means the ALT-126R can match the minimum output impedance of
the ampli er/receiver, in addition to adjusting volume. It eliminates the need for a speaker selector
or other impedance matching equipment. When the impedance matching switch is in 1X position
the volume control can be used as a standard control. The 2X, 4X, and 8X settings allow it to be
used as an UltraMatchâ„¢ control.
Considerations
Ampli er power rating - Make sure the ampli er has 20 watts per channel for each pair of
speakers to be connected.
How many ALT-126R - An UltraMatchâ„¢ volume control should be used for each pair of speakers
(however, up to 2 pairs of speakers can be used on each control).
Speaker rating - A minimum 4-ohm speaker load can be connected to the Output of each
UltraMatchâ„¢ volume control.
Impedance matching switch - Each ALT-126R in the system must have the impedance matching
switch positioned correctly (1X, 2X, etc.). Switch must be set BEFORE the ALT-126R is installed.
Installation location - Typical locations for ALT-126R installation include proximity to other wall
controls, near a desk or next to entrances.
Proper impedance matching switch position for UltraMatchâ„¢ Impedance Matching - ALT-126R
impedance matching switch position must be choosen to correctly multiply the impedance of the
system to a level that equals or exceeds the minimum impedance of the ampli er.
By determining the impedance capability of the ampli er with a few simple calculations, you can
determine the number of speakers the system can safely operate. The impedance matching switch
position can then be determined by using the charts on the next pages.
Produktspezifikationen
| Marke: | Russound |
| Kategorie: | Regeln |
| Modell: | ALT-126R |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Russound ALT-126R benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Regeln Russound
10 Juni 2024
10 Juni 2024
Bedienungsanleitung Regeln
- Regeln Da-Lite
- Regeln Gembird
- Regeln Hama
- Regeln HyperX
- Regeln Logitech
- Regeln Manhattan
- Regeln Manta
- Regeln Microsoft
- Regeln Nacon
- Regeln Philips
- Regeln Saitek
- Regeln Sony
- Regeln Speedlink
- Regeln SteelSeries
- Regeln Trust
- Regeln Panasonic
- Regeln Roland
- Regeln Bosch
- Regeln Canon
- Regeln Velleman
- Regeln Hori
- Regeln König
- Regeln Renkforce
- Regeln Thomson
- Regeln Pyle
- Regeln Mitsubishi
- Regeln Thermador
- Regeln Denon
- Regeln One For All
- Regeln BeamZ
- Regeln Akai
- Regeln Garmin
- Regeln Perel
- Regeln Aruba
- Regeln Astro
- Regeln Bigben
- Regeln Plantronics
- Regeln Thrustmaster
- Regeln Turtle Beach
- Regeln TOA
- Regeln Razer
- Regeln Scosche
- Regeln Tangent
- Regeln Honeywell
- Regeln SBS
- Regeln DJI
- Regeln Reely
- Regeln Supermicro
- Regeln Genesis
- Regeln SilverStone
- Regeln Mackie
- Regeln Numark
- Regeln ESI
- Regeln Eurolite
- Regeln Showtec
- Regeln Monoprice
- Regeln Monacor
- Regeln Ednet
- Regeln Konftel
- Regeln Sherwood
- Regeln Lumens
- Regeln Korg
- Regeln ION
- Regeln Amazon
- Regeln IVT
- Regeln DataVideo
- Regeln Manfrotto
- Regeln Tracer
- Regeln Cisco
- Regeln Danfoss
- Regeln American Audio
- Regeln Cameo
- Regeln Kramer
- Regeln Irritrol
- Regeln Vaddio
- Regeln RCA
- Regeln HQ Power
- Regeln Nintendo
- Regeln Speed-Link
- Regeln Bogen
- Regeln Sonance
- Regeln Rain Bird
- Regeln Sven
- Regeln Fostex
- Regeln PDP
- Regeln Homematic IP
- Regeln Blackmagic Design
- Regeln Ikan
- Regeln Gamesir
- Regeln Ganz
- Regeln Infinity
- Regeln Logic3
- Regeln Novation
- Regeln Spektrum
- Regeln Steca
- Regeln AMX
- Regeln Universal Remote Control
- Regeln Movistar
- Regeln Big Ben
- Regeln Intel
- Regeln Snakebyte
- Regeln RGBlink
- Regeln StarTech.com
- Regeln APart
- Regeln Sonnet
- Regeln Niles
- Regeln Inovonics
- Regeln Atlas Sound
- Regeln HID Identity
- Regeln ATen
- Regeln Morningstar
- Regeln Chauvet
- Regeln Xtreme
- Regeln Phoenix Contact
- Regeln OSD Audio
- Regeln Indiana Line
- Regeln DreamGEAR
- Regeln Crestron
- Regeln PowerA
- Regeln Atlona
- Regeln LYYT
- Regeln Xantech
- Regeln Sonifex
- Regeln Leviton
- Regeln 8BitDo
- Regeln Adaptec
- Regeln Highpoint
- Regeln Key Digital
- Regeln Nyko
- Regeln AViPAS
- Regeln Aquatic AV
- Regeln Auray
- Regeln Areca
- Regeln Trenton Systems
- Regeln Contour Design
- Regeln Ledxon
- Regeln Kanex
- Regeln LumenRadio
- Regeln Datapath
- Regeln Circle
- Regeln Rachio
- Regeln Victrix
Neueste Bedienungsanleitung für -Kategorien-
10 August 2024
23 Juni 2024
22 Juni 2024
21 Juni 2024
21 Juni 2024
21 Juni 2024
21 Juni 2024
21 Juni 2024
21 Juni 2024
21 Juni 2024