Russell Hobbs 20346-56 Bedienungsanleitung

Russell Hobbs Schneidemaschine 20346-56

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Russell Hobbs 20346-56 (48 Seiten) in der Kategorie Schneidemaschine. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/48
instructions 2
Bedienungsanleitung 4
mode d’emploi 6
instructies 8
istruzioni per l’uso 10
instrucciones 12
instruções 14
brugsanvisning 16
bruksanvisning (Svenska) 18
bruksanvisning (Norsk) 20
käyttöohjeet 22
инструкции (Русский) 24
pokyny (Čeština) 26
pokyny (Slovenčina) 25
instrukcja 30
upute 32
navodila 34
οδηγίες 36
utasítások 38
talimatlar 40
instrucţiuni 42
инструкции (Български) 44
47
2
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all
packaging before use.
A IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1 This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been supervised/instructed and
understand the hazards involved.
•Children must not use or play with the appliance.
•Keep the appliance and cable out of reach of children.
sMisuse of the appliance may cause injury.
2 Unplug the appliance before assembly, disassembly, or cleaning.
3 Don’t leave the appliance unattended while plugged in.
4 If the cable is damaged, it must be replaced by the manufacturer,
its service agent, or someone similarly qualified, to avoid hazard.
LDon’t put the motor unit in liquid.
CDon’t put your fingers inside the cutters.
5 Don’t use fingers or cutlery to push food down the tube – only the pusher.
6 Don’t use the appliance for any purpose other than those described in these instructions.
7 Don’t operate the appliance if it’s damaged or malfunctions.
8 Don’t run the motor continuously for more than 2 minutes, it may overheat. After 2 minutes
switch off for at least 2 minutes, to recover.
household use only
C ASSEMBLY
1 Switch the appliance off ( ) and unplug it.0
2 Hold the tube, and turn the body till the hole is uppermost.
3 Lower one of the cutters into the hole, till it engages with the drive.
3
4 Align the ring nut with the bayonet fittings on the hole.
5 Turn the ring nut 10mm anti-clockwise, to lock the cutter into the body.
6 Turn the body till the tube is vertical.
7 Now turn it 45° clockwise, to engage the bayonet fittings inside the motor unit.
8 Turn it 45° anti-clockwise, to lock it in place.
C IN USE
9 Cut the food to a shape that will go down the tube (45x35mm).
10 Put the plug into the power socket.
11 Move the switch: on off 1 0 Y pulse
Y 0In this position, the switch is spring-loaded. When you let go, it’ll return to .
12 Remove the pusher, and drop the ingredients down the tube.
13 Replace the pusher, and use it to push the ingredients gently down the tube.
C DISASSEMBLY
14 Switch the appliance off ( ) and unplug it.0
15 Turn the body 45° clockwise, to disengage the bayonet fittings, and pull it off the motor unit.
16 Turn the ring nut 10mm clockwise, to unlock it, and lift it of the body.
17 Tip the body up, so that the cutter drops out.
C JAMMING
18 Switch the appliance off ( ) and unplug it.0
, Dismantle the appliance, clean it, assemble it, and start again.
C CARE AND MAINTENANCE
19 Switch the appliance off ( ) and unplug it.0
20 Wipe the outside of the motor unit with a clean damp cloth.
21 Wash the removable parts in warm soapy water, rinse well, drain, and air dry.
` You may wash these parts in a dishwasher.
22 If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface
finishes.
23 The damage should be cosmetic only, and should not affect the operation of the appliance.
C STORAGE
24 You may store two of the cutters in the spaces in the rear of the appliance.
C NOISE
25 If you find the appliance is noisy, the cutter may be rubbing against the ring nut.
26 Applying a little cooking oil to the inside of the ring nut before use should fix this.
WENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn’t be disposed of with unsorted
municipal waste, but recovered, reused, or recycled.
diagrams
1 ring nut
2 cutters
3 slicer
4 coarse grater
5 fine grater
6 body
7 tube
8 cutter (rear)
9 bayonet fitting
10 pusher
11 switch
12 motor unit
` dishwasher safe
instructions

Produktspezifikationen

Marke: Russell Hobbs
Kategorie: Schneidemaschine
Modell: 20346-56

Brauchst du Hilfe?

Wenn Sie Hilfe mit Russell Hobbs 20346-56 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Schneidemaschine Russell Hobbs

Russell Hobbs

Russell Hobbs 20346-56 Bedienungsanleitung

26 Juli 2024
Russell Hobbs

Russell Hobbs Desire 20340-56 Bedienungsanleitung

11 Juli 2024

Bedienungsanleitung Schneidemaschine

Neueste Bedienungsanleitung für -Kategorien-

Royal Catering

Royal Catering RCKS-3 Bedienungsanleitung

16 Oktober 2024
Royal Catering

Royal Catering RCAM-250E Bedienungsanleitung

15 Oktober 2024
Royal Catering

Royal Catering RCAM-250PRO Bedienungsanleitung

15 Oktober 2024
Royal Catering

Royal Catering RCAM-250EXPERT Bedienungsanleitung

15 Oktober 2024
Princess

Princess Classic Multi Food Slicer 492977 Bedienungsanleitung

10 Oktober 2024
Severin

Severin AS 3914 Bedienungsanleitung

9 Oktober 2024
Ozito

Ozito MCS-2355 Bedienungsanleitung

6 Oktober 2024
Sunbeam

Sunbeam FC7500 Bedienungsanleitung

5 Oktober 2024
G3 Ferrari

G3 Ferrari Emilia 220 Bedienungsanleitung

4 Oktober 2024
Perel

Perel WTC180T Bedienungsanleitung

29 September 2024