Rotel RCD12 Bedienungsanleitung

Rotel CD-Spieler RCD12

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Rotel RCD12 (12 Seiten) in der Kategorie CD-Spieler. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

Owner’s Manual

Manuel d’utilisation

Bedienungsanleitung

Manual de Instrucciones

Manuale di istruzioni

Gebruiksaanwijzing

Instruktionsbok

RCD-12

Stereo Compact Disc Player

Lecteur de disque compac

Stereo-CD-Player

Lettore CD

Reproductor de Discos Compactos

CD-Speler

CD-spelare

СD-проигрыватель

www.Rotel.com/register

2RCD-12 Stereo Compact Disc Player

IMPORTANT FOR LASER PRODUCT

1. CLASS 1 LASER PRODUCT

2. DANGER: Visible laser radiation

when open and interlock failed or bypassed.

Avoid direct exposure to beam.

3. CAUTION: Do not open the top cover. There

are no user serviceable parts inside the

player; leave all servicing to qualified service

personnel.

WARNING!

To reduce the risk of electrical shock, fires, etc.:

1. Do not remove screws, covers or cabinet.

2. Do not expose the unit to rain or moisture.

3. Do not touch the power cord or plug with wet hands.

Rotel products are designed to comply with international directives

on the Restriction of Hazardous Substances (RoHS) in electrical

and electronic equipment and the disposal of Waste Electrical and

Electronic Equipment (WEEE). The crossed wheelie bin symbol

indicates compliance and that the products must be appropriately

recycled or processed in accordance with these directives.

This symbol means that this unit is double insulated.

An earth connection is not required.

Place the unit on a ﬁxed, level surface strong

enough to support its weight. Do not place it on

a moveable cart that could tip over.

CLASS 1

LASER PRODUCT

English

WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service

personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water.

Do not expose the unit to dripping or splashing. Do not place objects filled with liquids, such as vases,

on the unit. Do not allow foreign objects to get into the enclosure. If the unit is exposed to moisture,

or a foreign object gets into the enclosure, immediately disconnect the power cord from the wall. Take

the unit to a qualified service person for inspection and necessary repairs.

Read all the instructions before connecting or operating the component.

Keep this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on the product itself. Follow all

operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

Do not use this unit near water.

You must allow a minimum 10 cm or 4 inches of unobstructed clearance around the

unit.

Do not place the unit on a bed, sofa, rug, or similar surface that could block the ventilation openings.

If the unit is placed in a bookcase or cabinet, there must be ventilation of the cabinet to allow proper

cooling.

Keep the component away from radiators, heat registers, stoves, or any other appliance that produces

heat.

The unit must be connected to a power supply only of the type and voltage specified on the rear panel.

(USA: 120 V/60Hz, EC: 230V/50Hz)

Connect the component to the power outlet only with the supplied power supply cable or an exact

equivalent. Do not modify the supplied cable. A polarized plug has two blades, with one wider than

the other. A grounding plug has two blades plus a third grounding prong. These are provided for

your safety. Do not defeat grounding and/or polarization safety provisions. If the supplied plug does

not fit your outlet, please consult an electrician for replacement of the obsolete outlet. Do not use

extension cords.

The main plug of the power cordset is a disconnect device of the apparatus. In order to completely

disconnect the apparatus from the supply mains, the main plug of the power cordset should be

unplugged from the mains (AC) outlet.The stand-by LED indicator will not be lit up to show the power

cord is unplugged. The disconnect device shall remain readily operable.

Do not route the power cord where it will be crushed, pinched, bent, exposed to heat, or damaged

in any way. Pay particular attention to the power cord at the plug and where the cord exits the back

of the unit.

The power cord should be unplugged from the wall outlet during a lightning storm or if the unit is to

be left unused for a long period of time.

Use only accessories specified by the manufacturer.

Use only with a cart, stand, rack, bracket or shelf system recommended by Rotel. Use caution when

moving the unit in a stand or rack to avoid injury from a tip-over.

Immediately stop using the component and have it inspected and/or serviced by a qualified service

agency if:

• Thepowersupplycordorplughasbeendamaged

• Objectshavefallenorliquidhasbeenspilledintotheunit

• Theunithasbeenexposedtorain

• Theunitshowssignsofimproperoperation

• Theunithasbeendroppedordamagedinanyway

The batteries in the remote control shall not be exposed to excessive heat such as sunshine, fire or

the like.

Important Safety InstructionsNotice

The rear mini USB connection should be handled by authorized persons only.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

•Reorientorrelocatethereceivingantenna.(TV,radio,etc.)

•Increasetheseparationbetweentheequipmentandreceiver

•Connecttheequipmenttoanoutletoncircuitdifferentfromthattowhichthereceiveris

connected.

•Consultthedealeroranexperiencedradio/TVtechnicianforadditionalhelp.

Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following to conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

NOTE TO CATV SYSTEM INSTALLER: Call the CATV system or antenna installer’s attention to

Article 820-40 of the NEC. This provides guidelines for proper grounding and, in particular , speciﬁes

that the cable ground shall be connected to the grounding system of the building, as close to the point

of cable entry as practical. See installation diagram.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

interference in a residential installation. This equipment generates and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause interference to

radio or TV communications. There is no guarantee that interference will not occur in a particular

installation. If this equipment does cause interference to radio or television reception, which can be

determined by turning the equipment off and on, try to correct the interference by one or more of

the following measures:

•Reorientorrelocatethereceivingantenna.

•Increasetheseparationbetweentheunitandthetelevisiontuner.

•ConnecttheunittoanACpoweroutletonadifferentelectricalcircuit.

•ConsultyourauthorizedRotelretailerforassistance.

Produktspezifikationen

Marke:	Rotel
Kategorie:	CD-Spieler
Modell:	RCD12

Brauchst du Hilfe?

Wenn Sie Hilfe mit Rotel RCD12 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung CD-Spieler Rotel

Rotel RCD12 Bedienungsanleitung

3 August 2024

Rotel RCD-1572 Bedienungsanleitung

20 Februar 2024

Rotel RCD-951 Bedienungsanleitung

14 Januar 2024

Rotel RCD-1572MKII Bedienungsanleitung

7 Januar 2024

Rotel RCD-971 Bedienungsanleitung

16 August 2023

Rotel CD14MKII Bedienungsanleitung

7 Juni 2023

Rotel RCD-1570 Bedienungsanleitung

20 Mai 2023

Rotel RCD-991 Bedienungsanleitung

8 Oktober 2022

Rotel RDV-1060 Bedienungsanleitung

8 Oktober 2022

Rotel RCD-961 Bedienungsanleitung

8 Oktober 2022

Bedienungsanleitung CD-Spieler

Neueste Bedienungsanleitung für -Kategorien-

Gemini cdx 2400 Bedienungsanleitung

17 September 2024

Ideen Welt K 1216 N Bedienungsanleitung

27 August 2024

Tascam cdrw900 Bedienungsanleitung

27 August 2024

Tascam CD-RW900MKII Bedienungsanleitung

27 August 2024

Quadral Aurum C8 Bedienungsanleitung

26 August 2024

Elta 5786 Bedienungsanleitung

26 August 2024

MX Onda MXDM114 Bedienungsanleitung

25 August 2024

MX Onda MXDM124 Bedienungsanleitung

25 August 2024

MX Onda MXDM117 Bedienungsanleitung

25 August 2024

MX Onda MXDM10S Bedienungsanleitung

25 August 2024