Rotel RB-1091 Bedienungsanleitung

Rotel Empfänger RB-1091

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Rotel RB-1091 (52 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/52

Owner’s Manual

Manuel d’utilisation

Bedienungsanleitung

Manuale di Istruzioni

Manual de Instrucciones

Gebruiksaanwijzing

Instruktionsbok

Инструкция По Эксплуатации

RB-1091

Mono Power Ampliﬁer

Ampliﬁcateur de Puissance Monophonique

Mono-Endstufe

Finale di Potenza Mono

Etapa de Potencia Monofónica

Mono Eindversterker

Monoslutsteg

Моно усилитель мощности

Important Safety Information

WARNING: There are no user serviceable parts inside. Refer

all servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, be

sure that the apparatus shall not be exposed to dripping

or splashing and that no objects filled with liquids, such as

vases, shall be placed on the apparatus.

Do not allow foreign objects to get into the enclosure. If the

unit is exposed to moisture, or a foreign object gets into the

enclosure, immediately disconnect the power cord from the

wall. Take the unit to a qualified service person for inspection

and necessary repairs.

Read all the instructions before connecting or operating the component.

Keep this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on the

product itself. Follow all op erating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

You must allow 10 cm or 4 inches of unobstructed clearance

around the unit. Do not place the unit on a bed, sofa, rug, or similar

surface that could block the ventilation slots. If the component is placed in

a bookcase or cabinet, there must be ventilation of the cabinet to allow

proper cooling.

Keep the component away from radiators, heat registers, stoves, or any

other appliance that produces heat.

The unit must be connected to a power supply only of the type and voltage

specified on the rear panel of the unit.

Connect the component to the power outlet only with the supplied power

supply cable or an exact equivalent. Do not modify the supplied cable in any

way. Do not attempt to defeat grounding and/or polarization provisions.

Do not use extension cords.

Do not route the power cord where it will be crushed, pinched, bent at severe

angles, exposed to heat, or damaged in any way. Pay particular attention

to the power cord at the plug and where it exits the back of the unit.

Main plug is used as the mains disconnect device and shall remain ready

accessible.

The power cord should be unplugged from the wall outlet if the unit is to

be left unused for a long period of time.

Immediately stop using the component and have it inspected and/or serviced

by a qualified service agency if:

• The power supply cord or plug has been damaged.

• Objects have fallen or liquid has been spilled into the unit.

• The unit has been exposed to rain.

• The unit shows signs of improper operation

• The unit has been dropped or damaged in any way

Please use Class 2 Wiring when connecting the speaker terminals of the unit

to ensure proper insulation and minimize the risk of electrical shock.

Place the unit on a fixed, level surface strong enough to

support its weight. Do not place it on a moveable cart

that could tip over.

This symbol means that this unit is double

insulated. An earth connection is not

required.

Rotel products are designed to comply with international

directives on the Restriction of Hazardous Substances (RoHS) in

electrical and electronic equipment and the disposal of Waste

Electrical and Electronic Equipment (WEEE). The crossed

wheelie bin symbol indicates compliance and that the products

must be appropriately recycled or processed in accordance

with these directives.

RB-1091 Mono Power Ampliﬁer

3English

  

   

Figure 1: Controls and Connections\

Commandes et branchements

Bedienelemente und Anschlüsse

Pannello frontale e posteriore

Controles y Conexiones

De bedieningsorganen en aansluitingen

Kontroller och anslutningar

Органы управления и разъемы для подсоединения

Produktspezifikationen

Marke:	Rotel
Kategorie:	Empfänger
Modell:	RB-1091
Breite:	432 mm
Tiefe:	407 mm
Gewicht:	7800 g
Produktfarbe:	Schwarz
Höhe:	92 mm
Stromverbrauch (Standardbetrieb):	300 W
Stromverbrauch (Standby):	3 W
Audio Kanäle:	- Kanäle
THD, totalklirren:	0.03 %
Rauschverhältnis (SNR):	118 dB
Frequenzbereich:	10 - 40000 Hz
Verstärkerklasse:	D
RMS Leistungsoutput pro Kanal (4 Ohm):	1000 W
Eingang Empfindlichkeit:	2200 mV
Synchronisations-Eingangsimpedanz:	11100 Ohm
Stromstärke (maximal):	40 A
Leistungshöhepunkt pro Kanal:	500 W
Dämpfungsfaktor:	400
RMS Leistungsoutput pro Kanal (8 Ohm):	500 W