Rotel RA-04SE Bedienungsanleitung

Rotel Empfänger RA-04SE

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Rotel RA-04SE (56 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/56
RA-04 SE
Stereo Integrated Amplifier
Amplificateur intégré stéophonique
Stereo-Vollverstärker
Amplificador Integrado Estereofónico
Geïntegreerde Stereoversterker
Amplificatore Integrato Stereo
Integrerad Stereoförstärkare
ëÚÂÂÓ ËÌÚ„ËÓ‚‡ÌÌ˚È ÛÒËÎËÚÂθ
Owner’s Manual
Manuel de l’utilisateur
Bedienungsanleitung
Manual de Instrucciones
Gebruiksaanwijzing
Manuale di istruzioni
Instruktionsbok
àÌÒÚÛ͈Ëfl ÔÓθÁÓ‚‡ÚÂÎfl
Special Edition
Register your product at
www.Rotel.com/register
2RA-04SE Stereo Integrated Amplifier
Do not route the power cord where it will be crushed, pinched,
bent, exposed to heat, or damaged in any way. Pay particular
attention to the power cord at the plug and where the cord exits
the back of the unit.
The power cord should be unplugged from the wall outlet during
a lightning storm or if the unit is to be left unused for a long
period of time.
Use only accessories specified by the manufacturer.
Use only with a cart, stand, rack, bracket or shelf system recom-
mended by Rotel. Use caution when moving the unit in a stand or
rack to avoid injury from a tip-over.
Immediately stop using the component and have it inspected and/
or serviced by a qualified service agency if:
• Thepowersupplycordorplughasbeendamaged
• Objectshavefallenorliquidhasbeenspilledintotheunit
• Theunithasbeenexposedtorain
• Theunitshowssignsofimproperoperation
• Theunithasbeendroppedordamagedinanyway
Please use Class 2 Wiring when connecting the speaker terminals
of the unit to ensure proper insulation and minimize the risk of
electrical shock.
WARNING: There are no user serviceable parts inside. Refer all
servicing to qualified service personnel.
WARNING: To reduce the risk of fire or electric shock,do not
expose the unit to moisture or water. Do not expose the unit to
dripping or splashing. Do not place objects filled with liquids, such
as vases,on the unit. Do not allow foreign objects to get into the
enclosure. If the unit is exposed to moisture, or a foreign object
gets into the enclosure, immediately disconnect the power cord from
the wall. Take the unit to a qualified service person for inspection
and necessary repairs.
Read all the instructions before connecting or operating the
component.
Keep this manual so you can refer to these safety instructions.
Heed all warnings and safety information in these instructions and
on the product itself. Follow all operating instructions.
Clean the enclosure only with a dry cloth or a vacuum cleaner.
Do not use this unit near water.
You must allow a minimum 10 cm or 4 inches of
unobstructed clearance around the unit.
Do not place the unit on a bed, sofa, rug, or similar surface that
could block the ventilation openings. If the unit is placed in a
bookcase or cabinet, there must be ventilation of the cabinet to
allow proper cooling.
Keep the component away from radiators, heat registers, stoves,
or any other appliance that produces heat.
The unit must be connected to a power supply only of the type
and voltage specified on the rear panel. (USA: 120 V/60Hz,
EC: 230V/50Hz)
Connect the component to the power outlet only with the supplied
power supply cable or an exact equivalent. Do not modify the
supplied cable. A polarized plug has two blades, with one wider than
the other. A grounding plug has two blades plus a third grounding
prong. These are provided for your safety. Do not defeat grounding
and/or polarization safety provisions. If the supplied plug does not
fit your outlet, please consult an electrician for replacement of the
obsolete outlet. Do not use extension cords.
The main plug of the power cordset is a disconnect device of the
apparatus. In order to completely disconnect the apparatus from
the supply mains, the main plug of the power cordset should be
unplugged from the mains (AC) outlet. The stand-by LED indicator
will not be lit up to show the power cord is unplugged. The disconnect
device shall remain readily operable.
Rotel products are designed to comply with
international directives on the Restriction of
Hazardous Substances (RoHS) in electrical and
electronic equipment and the disposal of Waste
Electrical and Electronic Equipment (WEEE). The
crossed wheelie bin symbol indicates compliance and
that the products must be appropriately recycled or
processed in accordance with these directives.
Important Safety Instructions
This symbol means that this unit is double insulated.
An earth connection is not required.
Place the unit on a fixed, level surface strong enough
to support its weight. Do not place it on a moveable
cart that could tip over.
3
Figure 1: Controls and Connections
Commandes et branchements
Bedienelemente und Anschsse
Controles y Conexiones
De bedieningsorganen en aansluitingen
Controlli e collegamenti
Kontroller och anslutningar
é„‡Ì˚ ÛÔ‡‚ÎÂÌËfl Ë ‡Á˙ÂÏ˚
Special Edition
INTEGRATED AMPLIFIER
MODEL NO. RA-04SE
POWER CONSUMPTION : 220W
SERIAL NO. RP-502
SPEAKER B
LEFTRIGHT
CLASS 2 WIRING
LEFTRIGHT
SPEAKER A
12V TRIGGER OUT
SPEAKER IMPEDANCE
A OR B - 40HMS MINIMUM
A AND B - 80HMS MININUM
PRE OUTTAPEAU X 2AU X 1TUNERCDPHONO
IN OUT
LEFT
RIGHT
GND
WARNING: TO REDUCE THE RISK OF THE FIRE OR ELECTRICAL SHOCK,
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
DOUBLE INSULATION
When servicing
use only identical replacement parts.


Produktspezifikationen

Marke: Rotel
Kategorie: Empfänger
Modell: RA-04SE

Brauchst du Hilfe?

Wenn Sie Hilfe mit Rotel RA-04SE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger Rotel

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-