Rotel A12 Bedienungsanleitung

Rotel Empfänger A12

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Rotel A12 (88 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 46 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/88

A12

Stereo Integrated Amplier

Amplicateur Stéréo Intégré

Stereo-Vollverstärker

Amplicador Integrado Estereofónico

Geïntegreerde stereoversterker

Amplicatore integrato stereo

Integrerad stereoförstärkare

Интегрированный стерео усилитель

Owner’s Manual

Manuel de l’utilisateur

Bedienungsanleitung

Manual de Instrucciones

Gebruikershandleiding

Manuale di istruzioni

Instruktionsbok

Инструкция пользователя

2A12 Stereo Integrated Amplier

You must allow a minimum 10 cm or 4 inches of unobstructed

clearance around the unit.

WARNING: The rear panel power cord connector is the mains power

disconnect device. The device must be located in an open area that

allows access to the cord connector.

The unit must be connected to a power supply only of the type and

voltage specified on the rear panel. (USA: 120 V/60Hz, EC: 230V/50Hz)

Connect the component to the power outlet only with the supplied

power supply cable or an exact equivalent. Do not modify the supplied

cable. Do not use extension cords.

The mains plug is the disconnect of the unit. In order to completely

disconnect the unit from the supply mains, remove the main plug from

the unit and the AC power outlet. This is the only way to completely

remove mains power from the unit.

Use Class 2 wiring for speaker connections to ensure proper installation

and minimize the risk of electrical shock.

The batteries in the remote control should not be exposed to excessive

temperature such as sunshine, re or other heat sources. Batteries

should be recycled or disposed as per state and local guidelines.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following to conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Notice

The RS232 connection should be handled by authorized persons only.

WARNING: There are no user serviceable parts inside. Refer all

servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose

the unit to moisture or water. Do not expose the unit to dripping or

splashing. Do not place objects filled with liquids, such as vases, on

the unit. Do not allow foreign objects to get into the enclosure. If the

unit is exposed to moisture, or a foreign object gets into the enclosure,

immediately disconnect the power cord from the wall. Take the unit

to a qualified service person for inspection and necessary repairs.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult an electrician

for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly

at plugs, convenience receptacles, and the point where they exit

from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use with caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused for

long periods of time.

Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

The apparatus should be used in non tropical climate.

The ventilation should not be impeded by covering the ventilation

openings with items, such as newspapers, table-cloths, curtains, etc.

No naked flame sources, such as lighted candles, should be placed

on the apparatus.

Touching uninsulated terminals or wiring may result in an unpleasant

sensation.

Rotel products are designed to comply with

international directives on the Restriction of Hazardous

Substances (RoHS) in electrical and electronic

equipment and the disposal of Waste Electrical and

Electronic Equipment (WEEE). The crossed wheelie bin

symbol indicates compliance and that the products must

be appropriately recycled or processed in accordance

with these directives.

Important Safety Instructions

This symbol means that this unit is double insulated.

An earth connection is not required.

Figure 1: Controls and Connections

Commandes et Branchements

Bedienelemente und Anschlüsse

Controles y Conexiones

Controlli e connessioni

De bedieningsorganen en aansluitingen

Kontroller och anslutningar

Органы управления и разъемы

1 2 34 5 6 7

8 9

0 - =q w e r tyui

p [ ] \ a

Produktspezifikationen

Marke:	Rotel
Kategorie:	Empfänger
Modell:	A12
Breite:	430 mm
Tiefe:	345 mm
Gewicht:	8000 g
Produktfarbe:	Schwarz
Höhe:	93 mm
AC Eingangsspannung:	230 V
AC Eingangsfrequenz:	50 Hz
Stromverbrauch (Standardbetrieb):	230 W
Stromverbrauch (Standby):	0.5 W
Audio Kanäle:	- Kanäle
THD, totalklirren:	0.03 %
Rauschverhältnis (SNR):	100 dB
Frequenzbereich:	10 - 100000 Hz
Verstärkerklasse:	A/B
Synchronisations-Eingangsimpedanz:	24000 Ohm
Leistungshöhepunkt pro Kanal:	- W
Dämpfungsfaktor:	220
Output Widerstand:	470 Ohm
RMS Leistungsoutput pro Kanal (8 Ohm):	60 W