Rossmax X5 BT Bedienungsanleitung

Rossmax Blutdruckmessgerät X5 BT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Rossmax X5 BT (3 Seiten) in der Kategorie Blutdruckmessgerät. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

Pairing the Blood Pressure Monitor with your Smart-

phone

To begin using Bluetooth® for the rst time, please visit the

website at http://www.rossmax.com for the initial set-up

instructions.

1. Download and install the applicable APP onto your

smartphone.

2. To bind this device with your smartphone, turn on the

device, Bluetooth® and the App of smartphone, and fol-

low set-up and binding instructions.

3. If the binding is successful, the Bluetooth® symbol ( )

will appear on the display and keep ashing during data transfer. The current measured

value will automatically be transferred to the App when the measurement is completed.

4. If the binding has failed, the Bluetooth® symbol ( ) will not appear on the display and

the current measured value will not automatically be transferred to the App. In this case,

the value is saved in the selected user memory zone. Please re-bind this device with your

smartphone and follow App instructions for Bluetooth® transfer.

APP

120mmHg

USB PC

BP Manager

1. The monitor has two memory zones (1 and 2). Each zone can store up to 60 measure-

ments.

2. To read memory values from a selected memory zone, use the User-Switching key to

select a memory zone (1 or 2) from which you want to recall values. Press the Memory

key. The rst reading displayed is the average of all morning readings from the last 7

days.

3. Continue to press the Memory key to view the average of all nighttime readings from

the last 7 days.

4. Press the Memory key again to view the average of the last 3 measurements stored in

memory, and the last previously stored measurement. Every measurement comes with

an assigned memory sequence number.

5. All readings currently saved on the device can be transferred to the App using Blue-

tooth® after successful completion of the binding process. Select the desired user

memory zone and follow App instructions, the Bluetooth® transfer starts automatically.

Data transfer will be halted while performing a measurement or operating the device.

Note: The memory bank can store up to 60 readings per memory zone. When the num-

ber of readings exceeds 60, the oldest data will be replaced with the new record.

Note: AM is dened as 4:00 AM – 11:59 AM

Note: PM is dened as 6:00 PM – 2:00 AM

1. Press the User-Switching key to select memory zone 1 or memory zone 2.

2. Press and hold the Memory key for approximately 5 seconds, then the data in the mem-

ory zone can be erased automatically.

1. Adjust the date/time/Bluetooth® in the monitor by installing or replacing batteries or

holding down the ON/OFF/START key for approximately 5 seconds under power o

mode. The display will show a blinking number showing the year.

2. Change the year by pressing the Memory key, each press will increase the number.

Press the ON/OFF/START key to conrm the entry and the screen will show a blinking

number representing the date.

3. Change the date, the hour and the minute as described in Step 2 above, using the

Memory key to change and the ON/OFF/START key to conrm the entries.

4. After adjusting the date/time, the Bluetooth® symbol ( ) and the blinking icon “ ”

will be shown on the display simultaneously. Use the Memory key to choose whether

automatic Bluetooth® data transfer is activated (Bluetooth® symbol ( )+ ) or de-

activated (Bluetooth® symbol ( )+ ) and conrm with the ON/OFF/START key.

5. Press the ON/OFF/START key again, “0” will reappear as the Blood Pressure Monitor is

ready for measurement.

Rossmax provides a free, integrated and user-friendly blood pressure management soft-

ware which can be downloaded and installed on your computer. You may purchase a spe-

cial designed USB cable in order to connect Rossmax’s blood pressure monitor and your

PC. Please visit the website at http://www.rossmax.com for proceeding the downloading

and installation process.

If any abnormality will arise during use, please check the following points.

Symptoms Check Points Correction

No display when

the ON/OFF/START

key is pressed

Have the batteries run down? Replace them with four new batteries.

Have the batteries' polarities

been positioned incorrectly? Re-insert the batteries in the correct

positions.

EE mark shown

on display or the

blood pressure

value is displayed

excessively low

(high)

Is the cuff placed correctly? Wrap the cuff properly so that it is

positioned correctly.

Did you talk or move during

measurement? Measure again. Keep arm steady dur-

ing measurement.

Did you vigorously shake the

cuff during measurement?

Note: If the unit still does not work, return it to your dealer. Under no circumstance should

you disassemble and repair the unit by yourself.

1. The unit contains high-precision assemblies. Therefore, avoid extreme temperatures, hu-

midity, and direct sunlight. Avoid dropping or strongly shocking the main unit, and pro-

tect it from dust.

2. Clean the blood pressure monitor body and the cu carefully with a slightly damp, soft

cloth. Do not press. Do not wash the cu or use chemical cleaner on it. Never use thinner,

alcohol or petrol (gasoline) as cleaner.

3. Leaky batteries can damage the unit. Remove the batteries when the unit is not used for

a long time.

4. The unit should not be operated by children so to avoid hazardous situations.

5. If the unit is stored near freezing, allow it to acclimate at room temperature before use.

6. This unit is not eld serviceable. You should not use any tool to open the device nor should

you attempt to adjust anything inside the device. If you have any problems, please contact

the store or the doctor from whom you purchased this unit or please contact Rossmax

International Ltd.

7. As a common issue for all blood pressure monitors using the oscillometric measurement

function, the device may have diculty in determining the proper blood pressure for us-

ers diagnosed with diabetes, poor circulation of blood, kidney problems, or for users suf-

fered from stroke, or for unconscious users.

8. This unit is able to detect common arrhythmia (atrial or ventricular premature beats or

atrial brillation). The ARR, AFib and PC icons are displayed after the measurement if Atrial

Fibrillation and Premature Contraction was detected during the measurement. If ARR,

AFib or PC icons are displayed, you are advised to wait for a while and take another meas-

urement. It is strongly recommended that you consult your physician if the ARR, AFib or

PC icons appear often.

9. While the given device is able to detect specic pulse arrhythmia, the measurement ac-

curacy of the blood pressure meter may be impaired with the occurrence of pulse ar-

rhythmia.

10. To stop operation at any time, press the ON/OFF/START key, and the air in the cu will be

rapidly exhausted.

11. Once the ination reaches 300 mmHg, the unit will start deating rapidly for safety rea-

sons.

12. Please note that this unit can be a home healthcare product, but it is not intended to

serve as a substitute for the advice of a physician or medical professional.

13. Do not use this device for diagnosis or treatment of any health problem or disease. Meas-

urement results are for reference only. Consult a healthcare professional for interpreta-

tion of pressure measurements. Contact your physician if you have or suspect any medi-

cal problem. Do not change your medications without the advice of your physician or

healthcare professional.

14. Electromagnetic interference: Avoid strong electrical or electromagnetic elds in the

direct vicinity of the device (e.g.mobile telephones, microwave ovens) or less than 1,5

km from AM, FM or TV broadcast antennas. These may lead to temporary impairment of

measurement accuracy.

15. Dispose of device, batteries, components and accessories according to local regulations.

16. This monitor may not meet its performance specication if stored or used outside tem-

perature and humidity ranges specied in Specications.

Measurement Method Oscillometric

Measurement Range Pressure: 30~260 mmHg; Pulse: 40~199 beats/

minute

Pressure Sensor Semi conductor

Accuracy Pressure: ± 3 mmHg; Pulse: ± 5% of reading

Inflation Pump Driven

Deflation Automatic Air Release Valve

Memory capacity 60 memories for each zone x 2 zones

Auto-shut-off 1 minute after last key operation

Permissible Operating Temperature

and Humidity 10°C~40°C (50°F~104°F); %~85% RH; 700~1060 15

hPa

Permissible Transport and Storage

Temperature and Humidity -10°C~60°C (14°F~140°F); 10%~90% RH; 700~1060

hPa

DC Power Source DC 6V four AAA Batteries

AC Power Source DC 6V, (Plug size: outer(-) is Ø4.0, in≥600mA -

ner(+) is Ø1.7)

Dimensions 96 139.7 63.2 (L) X (W) X (H) mm

Weight 248.6g (G.W.) (w/o Batteries)

Arm circumference Adult: 24~40 cm (9.4”~15.7”)

Limited Users Adult users

: Type BF: Device and cuff are designed to provide

special protection against electrical shocks.

IP Classification IP21: Protection against harmful ingress of water

and particulate matter

*Specifications are subject to change without notice.

Recalling Values from Memory

Clearing Values from Memory

Time and Bluetooth® Adjustment

Data Transfer via Bluetooth®

Data Transfer to PC

Troubleshooting

Cautionary Notes

Specications

6. If Bluetooth® has been activated, the data is automatically transferred to the App after suc-

cessful completion of the binding process, please see Data Transfer via Bluetooth®.

This blood pressure monitor will re-inate automatically to higher pressure if the system

detects that more pressure is needed to take a blood pressure measurement.

Note: 1. This monitor automatically switches o approximately 1 minute after last key op-

eration.

2. To interrupt the measurement, simply press the ON/OFF/START key; the cu will deate

immediately.

17. Please note that when inating, the functions of the limb in question may be impaired.

18. During the blood pressure measurement, blood circulation must not be stopped for an

unnecessarily long time. If the device malfunctions, remove the cu from the arm.

19. Avoid any mechanical restriction, compression or bending of the cu line.

20. Do not allow sustained pressure in the cu or frequent measurements. The resulting re-

striction of the blood ow may cause injury.

21. Ensure that the cu is not placed on an arm in which the arteries or veins are undergoing

medical treatment, e.g. intravascular access or therapy, or an arteriovenous (AV) shunt.

22. Do not apply the cu on the side, where a mastectomy has been performed in your

patient history.

23. Do not place the cu over wounds as this may cause further injury.

24. Only ever use the cus provided with the monitor or original replacement cus. Other-

wise erroneous results will be recorded.

25. Batteries can be fatal if swallowed. You should therefore store the batteries and products

where they are inaccessible to small children. If a battery has been swallowed, call a doc-

tor immediately.

26. Do not use the tubing and/or AC adaptor for any other purpose than those specied, as

they can cause risk of strangulation.

27. Do not service or maintain device and cu while in use.

28. This device should not be used adjacent to or stacked with other equipment.

29. Please do not use any other cables or accessories not approved by the manufacturer in

this manual to avoid negative inuence on electromagnetic compatibility.

APP

Electromagnetic Compatibility Information

1. This device needs to be installed and put into service in accordance with the information provided

in the user manual.

2. WARNING: Portable RF communications equipment (including peripherals such as antenna cables

and external antennas) should be used no closer than 30 cm (12 inches) to any part of the X5,

including cables specied by the manufacturer. Otherwise, degradation of the performance of this

device could result.

If higher IMMUNITY TEST LEVELS than those specied in Table 9 are used, the minimum separation

distance may be lowered. Lower minimum separation distances shall be calculated using the

equation specied in 8.10.

Manufacturer’s declaration-electromagnetic immunity

The X5 is intended for use in the electromagnetic environment specied below. The customer or

the user of the X5 should assure that is used in such and environment.

Immunity

test IEC 60601 test level Compliance level Electromagnetic environment-guidance

Conducted

RF IEC

61000-4-6

3 Vrms:

0,15 MHz – 80 MHz

6 Vrms: in ISM and

amateur radio bands

between

0,15 MHz and 80 MHz

80 % AM at 1 kHz

3 Vrms:

0,15 MHz – 80 MHz

6 Vrms: in ISM and

amateur radio bands

between

0,15 MHz and 80 MHz

80 % AM at 1 kHz

Portable and mobile RF communications

equipment should be used no closer to

any part of the X5 including cables, than

the recommended separation distance

calculated from the equation applicable

to the frequency of the transmitter.

Recommended separation distance:

d = 1,2 √P, d = 1,2 √P 80MHz to 800 MHz,

d = 2,3 √P 800MHz to 2,7 GHz

Where P is the maximum output power

rating of the transmitter in watts (W) ac-

cording to the transmitter manufacturer

and d is the recommended separation

distance in metres (m).

Interference may occur in the vicinity of

equipment marked with the following

symbol:

Radiated RF

IEC 61000-

4-3

10 V/m

80 MHz – 2,7 GHz

80 % AM at 1 kHz

10 V/m

80 MHz – 2,7 GHz

80 % AM at 1 kHz

NOTE1: At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE2: These guidelines may not apply in all situations. Electromagnetic propagation is aected

by absorption and reection from structures, objects and people.

More information on EMC compliance of the device can be obtained from Rossmax website: www.

rossmax.com

Notes: 1. Unbinding your device will not delete the data from the App.

2. If you re-bind your smartphone with your blood pressure monitor, all prior reading history

stored on the phone App will be retained.

3. Bluetooth® data transfer will reduce the battery capacity.

IN0X50000000000XX

OBM_IB_X5(2)NA17BT_

EN_SW_ver2021

WARNING: The symbol on this product means that it's an electronic product and

following the European directive 2012/19/EU the electronic products have to be dis-

posed on your local recycling centre for safe treatment. Rossmax Swiss GmbH,

Widnauerstrasse 1, CH-9435 Heerbrugg, Switzerland

Model: X5

www.rossmax.com

Warranty Card

This instrument is covered by a 5 year guarantee from the date of purchase. The guar-

antee is valid only on presentation of the warranty card completed or stamped by the

seller/dealer confirming date of purchase or the receipt. Batteries, cuff and accessories

are not included. Opening or altering the instrument invalidates the guarantee. The

guarantee does not cover damage, accidents or non-compliance with the instruction

manual. Please contact your local seller/dealer or www.rossmax.com.

Customer Name: ____________________________________________________

Address: ___________________________________________________________

Telephone: __________________________________________________________

E-mail address: ______________________________________________________

Product Information

Date of purchase: ___________________________________________________

Store where purchased:

____________________________________________________________________

Blood Pressure Monitor

- The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Rossmax International Ltd. is under

license. Other trademarks and trade names are those of their respective owners.

- The blood pressure monitor uses ® low energy technology)Bluetooth Bluetooth®(

- Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.

- Google Play and the Google Play logo are trademarks of Google Inc.

Data Transfer via Bluetooth®

Please download and install the

free Healthstyle APP onto your

smartphone

Healthstyle APP

Blood pressure measurements determined with X5 are equivalent to those obtained by a

trained observer using cu/stethoscope auscultation method, within the limits prescribed

by the American National Standard, Electronic or Automated Sphygmomanometers. This

unit is to be used by adult consumers in a home environment. The patient is an intended

operator. Do not use this device on infants or neonates. X5 is protected against manufac-

turing defects by an established International Warranty Program. For warranty information,

you can contact the manufacturer, Rossmax International Ltd.

Attention: Consult the accompanying documents. Please read this manual carefully

before use. For specic information on your own blood pressure, contact your physi-

cian. Please be sure to keep this manual.

Pulse Arrhythmia (PARR) technology specically detects the existence of pulse arrhythmia,

including atrial brillation (AFib), Atrial and / or Ventricular Premature Contractions (PC).

Pulse Arrhythmia may be related to cardiac disorders, needs medical attention and thus

early diagnosis is of paramount importance. The PARR technology detects arrhythmia dur-

ing regular blood pressure checks without any additional user skills, user interaction and

measurement prolongation. Beside the blood pressure diagnosis a specic pulse arrhyth-

mia diagnosis is provided with PARR.

Note: The PARR detection of AFib and PC is provided with a clinically proven high detection

probability [1]. However, the sensitivity and specicity is limited, thus most, but not all

pulse arrhythmia will be detected and displayed. In certain patients with uncommon

clinical conditions the PARR technology may not be able to detect pulse arrhyth-

mia. This partly comes from the fact that some arrhythmia can only be found with an

ECG diagnosis, but not with a pulse diagnosis. Thus PARR is not meant to replace any

medical ECG diagnosis by your doctor. PARR provides an early detection of certain

pulse arrhythmia, which inevitably need to be presented to your doctor in charge.

Remark: [1] Clinical Investigation of PARR - A new Oscillometric Pulse Arrhythmia Type Dis-

criminating Detection Technology.

The upper chambers of the heart (the atria) do not contract, but quiver and thus blood is

driven irregularly and with lower eciency into the ventricles. Subsequently irregular heart-

beats occurs, which mostly are associated with a fast, yet highly instable heart rate. This

condition is associated with a higher risk for the formation of cardiac blood clots. Amongst

others, they may elevate the risk of brain strokes. Beside this atrial brillation may contribute

to the severity of a chronic or acute heart failure condition and may be associated with

other heart-related complications. Age dependent, about 10 %- 20 % percent of patients

who suer from an ischemic stroke also suer from atrial brillation.

Atrial brillation most often initially occurs with temporary periods of arrhythmia and may

progress to a permanent state of this disorder in the course of time. No matter, whether

you intent to safeguard yourself from an undetected AFib state, or you measure during an

ongoing period of active atrial brillation, or you measure in between periods of AFib, the

PARR technology can be applied at any of these conditions. This unit is able to detect Atrial

brillation (AFib). The ARR and AFib icons ( ) are displayed right after the measure-

ment if Atrial Fibrillation was detected.

Note: It is strongly recommended, that you consult your physician, if either the AFib icon

occurs newly for several times, or, if your AFib is known to your doctor, but the inci-

dence of AFib readings changes over time. Your doctor will then be able to provide

all required medical test and possible therapeutic procedures.

Note: The presence of a cardiac pacemaker may impair the AFib detection by PARR.

Extra abnormal heartbeats generated in irregular excitation sites of your heart, either in the

atria (PAC), the ventricle (PVC) or the cardiac conduction nodes (PNC). These extra beats

may disrupt your regular rhythm, they may come in early or cause a signicant pauses re-

garding your perceivable pulse. This is called palpitations, which can be felt in your chest.

They may occur as isolated, single events, as a series of irregular pulses or can be distributed

all over your pulse beats. If they are not related to mental stress, or acute demanding physi-

cal load, they may be a marker for a multitude of cardiac disorders. Some of these disorders

go along with an elevated risk prole for ischemic events, either in the heart (e,g, coronary

heart disease) or outside the heart, e.g. an elevated risk for a stroke. Some PCs may indicate

on valvular or myocardial disorders and become very important if a myocarditis (infection of

the heart muscle) is suspected. This unit is able to detect premature contractions. The ARR

and PC icons ( ) are displayed right after the measurement if premature contractions

have been detected.

Note: It is strongly recommended, that you consult your physician, if either the PC icon

occurs newly for several times, or, if your PC is known to your doctor, but the inci-

dence of PC readings changes over time. Your doctor will then be able to provide all

required medical test and possible therapeutic procedures.

Once the occurrence of pulse arrhythmia has been detected in the course of your blood

pressure measurement, the icon ARR is displayed. In the case, that the found pulse arrhyth-

mia can be specied by the PARR technology, the ARR icon is accompanied by the speci-

cally detected type of arrhythmia, e.g. PC or AFib. Once the kind of found pulse arrhythmia

cannot be safely determined by PARR, the device is displaying ARR without any additional

pulse arrhythmia type icon.

Note: It is strongly recommended, that you consult your physician, if either the ARR icon

occurs newly for several times, or, if your ARR is known to your doctor, but the inci-

dence of ARR readings changes over time. This is independent whether the ARR icon

is specied by another pulse arrhythmia icon or not. Your doctor will then be able to

provide all required medical test and possible therapeutic procedures.

This unit uses the oscillometric method to detect your blood pressure. Before the cu starts

inating, the device will establish a baseline cu pressure equivalent to the air pressure. This

unit will automatically determine the appropriate ination level based on pressure oscilla-

tions, followed by cu deation.

During the deation, the device will detect the amplitude and slope of the pressure oscilla-

tions and thereby determine your actual the systolic blood pressure, diastolic blood pressure,

and pulse rate.

This Blood Pressure Monitor complies with the European regulations and bears the CE mark

“CE 1639”. The quality of the device has been veried and conforms to the provisions of the

EC council directive 93/42/EEC (Medical Device Directive), Annex I essential requirements

and applied harmonized standards.

EN 1060-1: 1995/A2: 2009 Non-invasive sphygmomanometers - Part 1 - General requirements

EN 1060-3: 1997/A2: 2009 Non -invasive sphygmomanometers - Part 3 - Supplementary re-

quirements for electro-mechanical blood pressure measuring systems

EN 1060-4: 2004 Non-invasive sphygmomanometers - Part 4: Test Procedures to determine

the overall system accuracy of automated non-invasive sphygmomanometers.

ISO 81060-2: 2013 Non-invasive sphygmomanometers -- Part 2: Clinical investigation of au-

tomated measurement type.

This blood pressure monitor was designed for long service periods. In order to ensure con-

tinued accuracy, it’s recommended that all digital blood pressure monitors require re-cal-

ibration. This monitor (under normal usage with approx. 3 measurements a day) does not

require re-calibration for 2 years. Once the unit should be re-calibrated the device will dis-

play . The unit should also be re-calibrated if the monitor sustains damage due to blunt

force (such as dropping) or exposure to uids and / or extreme hot or cold temperature /

humidity changes. When appears, simply return your device to your nearest dealer for

re-calibration service.

Refer to the denitions of the World Health Organization, the blood pressure ranges can be

classied into 6 grades. (Ref. 1999 WHO-International Society of Hypertension Guidelines for

the management of Hypertension). This blood pressure classication are based on statistical

data, and may not be directly applicable to any particular patient. It is important that you

consult with your physician regularly. Your physician will tell you your normal blood pressure

range as well as the point at which you will be considered at risk. For reliable monitoring and

reference of your blood pressure, keeping long-term records is recommended. Please down-

load the blood pressure log at our website www.rossmax.com.

If the cu was applied too loosely, it may cause unreliable measurement results or meas-

urements can fail to start. The “Loose Cu Detection” can help to determine if the cu is

wrapped snugly enough. The specied icon appears once a “loosen cu” has been de-

tected during measurement. Otherwise the specied icon appears if the cu is wrapped

correctly during measurement.

The “Movement Detection” helps reminding the user to remain still and is indicating any

adverse body movement during measurement. The specied icon appears once a “body

movement” has been detected during and after such a measurement.

Note: It’s highly recommended that you measure again if the icon appears.

This monitor has a non-stored single measurement function. Press the User-Switching key

to select the memory zone of guest , and follow the Measurement Procedure to take a

measurement correctly. When the measurement is completed, the measurement value will

not be stored in memory zone.

The World Health Organization, classifying blood pressure ranges into 6 grades. This unit is

equipped with an innovative blood pressure risk indication, which visually indicates the as-

sumed risk level (optimal / normal / high-normal/ grade1 hypertension / grade 2 hyperten-

sion / grade 3 hypertension) of your result, making the meaning of your ndings compre-

hensive.

EE / Measurement Error: Make sure the L-plug is securely connected to the air socket and

calmly measure again. Wrap the cu correctly around your arm and keep arm steady dur-

ing measurement. If the error keeps occurring, return the device to your local distributor or

service centre.

E1 / Air Circuit Abnormality: Make sure the L-Plug is securely connected to the air socket

on the side of the unit and calmly measure again. If the errors still occur, return the device to

your local distributor or service centre for help.

E2 / Pressure Exceeding 300 mmHg: Switch the unit o and measure again quietly. If the

error keeps occurring, return the device to your local distributor or service centre.

E3 / Data Error: Remove the batteries, wait for 60 seconds, and reload. If the error keeps oc-

curring, return the device to your local distributor or service centre.

Er / Exceeding Measurement Range: Measure again quietly. If the error keeps occurring,

return the device to your local distributor or service centre.

1. Connect the AC adaptor with the AC adaptor jack on the right side of the unit.

2. Plug the AC adaptor into the socket. (AC adaptors with required voltage and current indi-

cated near the AC adaptor jack.)

Caution:

1. Please unload the batteries when operating with the AC mode for a longer period of

time . Leaving the batteries in the compartment for a long time may cause leakage,

which may lead to damage of the unit.

2. No batteries are needed when operating with the AC mode.

3. AC adaptors are optional. Please contact the distributor for the compatible AC adaptors.

4. Use only the authorized AC Adaptor with this blood pressure monitor. Information for the

authorized AC adaptor, please refer to APPENDIX 1.

1. Press down and lift the battery cover in the direction of the arrow to open the battery

compartment.

2. Install or replace 4 “AAA” sized batteries in the battery compartment according to the indi-

cations inside the compartment.

3. Replace the battery cover by clicking in the bottom hooks rst, then push in the top end

of the battery cover.

1. Unwrap the arm cu, leaving the end of the cu through the D-ring of the cu.

2. Put your left arm through the cu loop. The color strip indication should be positioned

closer to you with the tube pointing in the direction of your arm (Fig. ). Turn your left 

palm upward and place the edge of the arm cu at approximately 1.5 to 2.5 cm above

the inner side of the elbow joint (Fig. ). Tighten the cu by pulling the end of the cu.

3. Center the tube over the middle of the arm. Press the hook and loop material together

securely. Allow room for 2 ngers to t between the cu and your arm. Position the artery

mark (Ø) over the main artery (on the inside of your arm) (Fig.  , ). Note: Locate the

main artery by pressing with 2 ngers approximately 2 cm above the bend of your elbow

on the inside of your left arm. Identify where the pulse can be felt the strongest. This is

your main artery.

4. Plug in the cu connecting tube into the unit (Fig. ).

5. Lay your arm on a table (palm upward) so the cu is at the same height as your heart.

Make sure the tube is not kinked (Fig. ).

6. This cu is suitable for your use if the arrow falls within the solid color line as shown on the

right (Fig. ). If the arrow falls outside the solid color line, you will need a cu with other 

circumferences. Contact your local dealer for additional size cus.

Introduction

PARR(Pulse Arrhythmia) Technology

Atrial Fibrillation Detection (AFib)

Premature Contraction Detection (PC)

Pulse Arrhythmia Detection (ARR)

Real Fuzzy Measuring Technology

Preliminary Remarks

Blood Pressure Standard

Loose Cu Detection

Name/Function of Each Part

Display Explanations

Movement Detection

Guest Mode

Hypertension Risk Indication (HRI)

Error Codes for your reference

Using the AC Adaptor (Optional)

Installing Batteries

Applying the Cu

Blood Pressure Standard World Health Organization (WHO) : 1999

Systolic Pressure

(mmHg)

Diastolic Pressure

(mmHg)

Optimal <120 <80and

Normal 120~129 80~84or

High-normal 130~139 85~89or

Grade 1 hypertension (mild) 140~159 90~99or

Grade 2 hypertension (moderate) 160~179 100~109or

Grade 3 hypertension ≥180 ≥110or

1. Arm Cu

2. LCD Display

3. Air Tube and

Connector

4. Memory Key

5. ON/OFF/START key

6. User-Switching key

7. Battery Cover

8. Data Link Socket

9. AC Adaptor Jack

10. Cu Holder Design

513

1 2 3

12 16

1. Arrhythmia Detection (ARR)

2. Atrial Fibrillation Detection (AFib)

3. Premature Contraction Detection (PC)

4. Date/Time Indication

5. Weak Battery Mark

6. Movement Mark

7. Loose Cuff Detection

8. Hypertension Risk Indication

9. Morning and Nighttime Mark

10. Memory/Date Mark

11. Memory Average Mark

12. Bluetooth® Mark

13. Systolic Pressure

14. Diastolic Pressure

15. Pulse Rate

16. Pulse Mark

17. Memory Zone

Center tube over

middle of arm

The PARR technology is able to detect and display combined pulse arrhythmia ndings.

Display Results

- Normal nding

ARR Pulse Arrhythmia without type-specic detection

ARR PC Pulse Arrhythmia-Premature ventricular, atrial or nodal beat detection

ARR AFib Pulse Arrhythmia-Atrial brillation detection

ARR AFib PC Combined Pulse Arrhythmia: Atrial brillation & Premature beats detection

Here are a few helpful tips to help you obtain more accurate readings:

• Blood pressure changes with every heartbeat and is in constant uctuation throughout

the day.

• Blood pressure recording can be aected by the position of the user, his or her physi-

ological condition and other factors. For greatest accuracy, wait one hour after exercising,

bathing, eating, drinking beverages with alcohol or caeine, or smoking to measure blood

pressure.

• Before measurement, it’s suggested that you sit quietly for at least 5 minutes as measure-

ment taken during a relaxed state will have greater accuracy. You should not be physically

tired or exhausted while taking a measurement.

• Do not take measurements if you are under stress or tension.

• Sit upright in a chair, and take 5-6 deep breaths. Avoid leaning back while the measure-

ment is being taken.

• Do not cross the legs while sitting and keep the feet at on the oor during measurement.

• During measurement, do not talk or move your arm or hand muscles.

• Take your blood pressure at normal body temperature. If you are feeling cold or hot, wait

a while before taking a measurement.

• If the monitor is stored at very low temperature (near freezing), have it placed at a warm

location for at least one hour before using it.

• Wait 5 minutes before taking the next measurement.

1. Press the User-Switching key to select memory zone 1, memory zone 2 or guest mode.

After a memory zone is selected, press the ON/OFF/START key to reset the monitor so it

can start measurement in the chosen memory zone.

2. Press the ON/OFF/START key. All digits will light up, checking the display functions. The

checking procedure will be completed in 2 seconds.

3. After all symbols appear, the display will show a blinking “0”. The monitor is ready to meas-

ure and will automatically inate the cu slowly to start measurement.

4. When the measurement is completed, the cu will exhaust the pressure inside. Systolic

pressure, diastolic pressure and pulse will be shown simultaneously on the LCD screen.

The measurement is then automatically stored into the pre-designated memory zone.

5. In order to enhance the probability of pulse arrhythmia detection by the PARR technol-

ogy, measurement repetitions are recommended.

Measurement Procedures

4. Replace the batteries in pairs. Remove batteries when unit is not in use for extended

periods of time.

You need to replace the batteries when

1. Low battery icon appears on display.

2. The ON/OFF/START key is pressed and nothing appears on display.

Caution:

1. Batteries are hazardous waste. Do not dispose them together with the household gar-

bage.

2. There are no user serviceable parts inside. Batteries or damage from old batteries are not

covered by warranty.

3. Use exclusively brand batteries. Always replace with new batteries together. Use batteries

of the same brand and same type.

Produktspezifikationen

Marke:	Rossmax
Kategorie:	Blutdruckmessgerät
Modell:	X5 BT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Rossmax X5 BT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Blutdruckmessgerät Rossmax

Rossmax GA series Bedienungsanleitung

17 August 2024

Rossmax CalPro - Mobile Calibration System Bedienungsanleitung

15 August 2024

Rossmax MW-821F Bedienungsanleitung

11 August 2024

Rossmax GA102 Bedienungsanleitung

3 August 2024

Rossmax GD series Bedienungsanleitung

3 August 2024

Rossmax GB101 Bedienungsanleitung

21 Juni 2024

Rossmax GD111 Bedienungsanleitung

21 Juni 2024

Rossmax GD101 Bedienungsanleitung

21 Juni 2024

Rossmax GB102 Bedienungsanleitung

21 Juni 2024

Rossmax GB112 Bedienungsanleitung

21 Juni 2024

Bedienungsanleitung Blutdruckmessgerät

Neueste Bedienungsanleitung für -Kategorien-

Medisana BPW 300 Bedienungsanleitung

16 Oktober 2024

Cresta BPM701 Bedienungsanleitung

4 Oktober 2024

Medel Palm Self Bedienungsanleitung

28 September 2024

Medel Dualstetho PRO Bedienungsanleitung

28 September 2024

Medel Stetho Self Bedienungsanleitung

28 September 2024

Medel Sense Bedienungsanleitung

28 September 2024

Bioland 2006 Bedienungsanleitung

17 September 2024

Medisana SL 100 Connect Bedienungsanleitung

17 September 2024

König HC-BLDPRESS13 Bedienungsanleitung

15 September 2024

Thomson TBPI-801W Bedienungsanleitung

12 September 2024