Römer TRIFIX i-SIZE Bedienungsanleitung

Römer Autositz TRIFIX i-SIZE

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Römer TRIFIX i-SIZE (2 Seiten) in der Kategorie Autositz. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Seat shell

ISOFIX locking arms

Fabric loop

Operating instructions compartment

Adjusting ring of the headrest

Tilt adjustment lever

Adjustment belt

Adjustment button

Shoulder straps

Shoulder pads

Release button

Harness buckle

Headrest

ISOFIX insertion aids

ISOFIX fastening points (car) Top tether

1. PRODUCT OVERVIEW

2. APPROVAL

These instructions use the following symbols stated below:

Symbol Keyword Explanation

DANGER! Risk of severe personal injury

WARNUNG! Risk of minor personal injury

CAUTION! Risk of material damage

TIP: Useful notes

3. USE IN THE VEHICLE

Please observe the instructions for using children's restraining systems in the

operating instructions of your vehicle. During use, be sure to observe any restric-

tions relating to airbags.

Please refer to the operating instructions for your vehicle for information about

vehicle seats which are certiﬁed for the use of children's restraining systems according

to ECE R16.

TRIFIX i-SIZE usage options:

BRITAX RÖMER

child safety seat

Vehicle seat position with ISOFIX and

top tether

i-Size Not i-Size

TRIFIX i-SIZE

You can use your child safety seat as follows:

In the direction of travel Yes

Against the direction of

travel

On seats featuring:

ISOFIX fastenings (be-

tween the seat surface

and backrest) and top

tether anchoring points

(e.g. on the loading area,

on the ﬂoor or behind the

backrest)

Yes 2)

(Please observe the applicable regulations in force in your country)

1) Using the seat in a backwards-facing car seat (e.g. in a van or minibus) is only permitted if

the car seat is also approved for transporting adults. The seat may not be in the area of eect

of an airbag.

2) If there is a passenger airbag: Slide the passenger seat well backwards and follow any

relevant directions in your vehicle's operating instructions.

76–105cm

≤ 22kg

Safety button

01 02

We are pleased that you have chosen our

TRIFIX i-SIZE

to accompany your child safely through a new stage of his or her life.

In order to protect your child correctly, the

TRIFIX i-SIZE

must always be used and installed as described in these instructions.

The

TRIFIX i-SIZE

is exclusively intended to secure your baby

in your vehicle.

BRITAX RÖMER

child safety seat

Tested and approved according to

ECE* R 129/01

Body size Body weight

TRIFIX i-SIZE

76–105 cm ≤ 22 kg

*ECE = European Standard for Child Safety Equipment

The child safety seat has been designed, tested and approved according to

the requirements of the European Standard for Child Safety Equipment (ECE

R 129/01). The seal of approval "E" (in a circle) and the approval number are

located on the orange approval label (sticker on the child safety seat).

This certiﬁcation will be invalidated if you make any modiﬁca-DANGER!

tions to the child safety seat. Only the manufacturer is permitted

to make modiﬁcations to the child safety seat. Unauthorised

technical changes can cause the protective function of the

seat to be reduced or completely eliminated. Do not make any

technical changes to the child safety seat.

Use the DANGER!

TRIFIX i-SIZE

exclusively for securing your child in your

vehicle. It is in no way suitable for use as a seat or toy in the

home.

PAGE I

4. CARE AND MAINTENANCE

Cleaning

Please only use authentic BRITAX RÖMER replacement seat covers. The

seat cover is an integral part of the child safety seat and is key to ensuring the

trouble-free functionality of the system. Replacement seat covers are available

from your dealer.

• The cover can be removed and washed with a mild detergent in the

delicates programme of the washing machine (30°C). Please observe the

instructions on the washing label of the cover.

• The shoulder pads can be removed and washed in luke-warm soapy

water.

• The plastic parts and the harness can be cleaned with soapy water. Do not

use any caustic cleaning agents (such as solvents).

Care for the harness buckle

To ensure the safety of your child, it is absolutely essential that the harness

buckle continues to function correctly. Harness buckle malfunctions are usu-

ally caused by a build-up of soiling or by external objects:

• When you press the red release button, it takes a long time for the buckle

tongues to be ejected.

• The buckle tongues no longer engage (i.e. when you try to push them in,

they pop out again).

• The buckle tongues engage without an audible "click".

• The buckle tongues are dicult to push in (you feel a certain amount of

resistance).

• The buckle can only be opened by applying extreme force.

Remedy: Clean the harness buckle so that it functions properly again with no

trouble:

Cleaning the harness buckle

1. Open the harness buckle 04 (press the red release button).

2. Unhook the elastic seam of the cover from the bottom edge of the seat

shell 17 .

3. Open the Velcro fastener on the crotch pad 18 and pull it over the harness

buckle 04 along with the cover.

4. Rotate the crotch harness with the metal plate 19 which holds the har-

ness buckle 04 in the seat shell 17 by 90° in the longitudinal slot.

5. Slide the metal plate 19 through the harness slot 20 with the narrow edge

facing forwards.

6. Soak the buckle 04 in warm water containing washing-up liquid for at least

an hour. Rinse the buckle thoroughly and dry it.

7. Slide the metal plate 19 fully into the longitudinal slot from the front.

8. Rotate the crotch harness with the metal plate 19 by 90° until it is hooked

into the harness slot 20 on the seat shell 17 perpendicular to the direction

of motion.

DANGER! Tug hard on the harness buckle 04 to make sure that it is

secure in the seat shell 17.

9. Thread the harness buckle 04 through the crotch pad 18 on the cover

and then re-fasten the Velcro fastener and the cover.

Removing the cover

1. Push the tilt adjustment lever 11 upwards and slide back the seat shell 17

to upright position.

2. Loosen the shoulder straps 08 as far as possible.

3. Open the harness buckle 04 (press the red release button).

4. Open the Velcro fastener on the crotch pad 18.

5. Slide the headrest 03 into the lowest position.

6. Pull o the cover of the headrest 03 .

7. Open the snap fasteners on the left and right of the rear part of the cover.

8. Turn over the rear part of the cover onto the seat surface.

9. Thread the shoulder straps 08 through the recesses in the cover. Unhook

the elastic seam of the cover from the bottom edge of the seat shell.

TIP: Start with the handles on the side and top of the seat shell.

10. Pull the cover up and over the border of the strap adjuster.

11. Unthread the harness buckle 04 and the strap end 09 from the cover.

12. Pull the cover upwards a little and then put it with the recess over the

headrest 03 .

DANGER! The child seat must not be used without the seat cover.

Reattaching the cover:

Proceed in reverse order to put on the cover.

The harnesses must not be twisted and must be correctly posi-Caution:

tioned in the harness slots.

Removing the shoulder pads

1. Loosen the shoulder straps 08 as far as possible.

2. Slide the headrest 03 into the second position from the top.

3. Fold up the bottom part of the headrest 03 upwards.

4. Open the shoulder pads 07 at the Velcro fasteners at the side.

Rear of the child safety seat

5. Open the operating instructions compartment 14 .

6. Pull out the shoulder straps 08 a little so that you can see the strap loops

of the shoulder pads 07 underneath.

7. Unhook the strap loops from the plastic fasteners 25 of the height ad-

juster.

8. Pull the shoulder pads 07 forwards out of the harness slots.

Re-attaching the shoulder pads:

Simply follow the steps above in reverse order.

The shoulder pads Caution: 07 or harnesses must not be twisted or

changed places. The shoulder straps 08 must be located under the black

cover band 21 in the shoulder pads 07 .

04 18 19 20

07 07

76–105cm

≤ 22kg

TRIFIX i-SIZE

User instructions

www.britax.com

2000027224 17/06

1 cm

5. SAFETY NOTES

Please take the time to read these instructions carefully and keep them

to hand in the intended storage compartment

14 on the child safety seat

at all times. The instructions must be kept with the child safety seat if the

latter is passed on to a third party.

DANGER! For the protection of your child:

• In the event of an accident with a collision speed of more than 10km/h, the

child safety seat may be damaged without the damage becoming immediately

visible. In this case the child safety seat must be replaced. Please dispose of

it properly.

• As a rule, have your child safety seat checked if it was damaged (e.g if it falls

on the ground).

• Regularly check all important parts for damage. Ensure that all mechanical

parts, in particular, are fully functional.

• Never lubricate or oil parts of the child seat.

•

Never leave your child unattended in the child seat in the vehicle.

• Only allow your child to enter and exit the vehicle on the pavement side.

• Protect the child safety seat from intensive direct sunlight when it is not in use.

The child safety seat can get very hot in direct sunshine. Children's skin is

sensitive and could be harmed as a result.

•

The more snugly the belt ﬁts over your child's body, the better they will be pro-

tected. Therefore, avoid putting thick clothes on your child under the belt.

• Take regular breaks on long journeys in order to give your child the opportu-

nity to run about and play.

• Use on the rear seat: Move the front seat far enough forwards to ensure that

your child's feet cannot hit the backrest of the front seat (to prevent the risk of

injury).

DANGER! For the protection of all vehicle occupants:

In the case of an emergency stop or an accident, unsecured persons or ob-

jects may cause injury to other vehicle occupants. Please always check that...

• no other load-bearing contact points are used other than those speciﬁed in

these instructions and marked out on the child safety seat.

• the backrests of the vehicle seats are locked (i.e. that a foldable rear seat

bench latch is engaged).

• all heavy or sharp-edged objects in the vehicle (e.g. on the parcel shelf) are

secured.

• all persons in the vehicle have their seatbelts fastened.

• the child safety seat is always secured when it is in the vehicle, even if no child

is being transported.

WARNING! For your protection when handling the child seat:

• Never use the child safety seat free-standing, not even for test sitting.

•

To avoid damage, ensure that the child safety seat is not jammed in between

hard objects (car door, seat rails, etc.).

•

Keep the child safety seat in a safe place when it is not in use. Do not place any

heavy objects on the seat and do not store it directly next to sources of heat or

in direct sunlight.

CAUTION! To protect your vehicle:

• Certain car seat covers made from more sensitive materials (e.g. velour,

leather, etc.) may sustain signs of wear and tear when using child safety seats.

For optimum protection of your car seat covers, we recommend using the

BRITAX RÖMER car seat protector from our range of accessories.

PAGE II

1. If your vehicle is not ﬁtted with ISOFIX insertion aids by standard, clamp the

two insertion aids 02 , which are included in the scope of delivery of the

seat*, with the section pointing upwards to the two ISOFIX fastening points

01 of your vehicle.

The ISOFIX fastening points are located between the surface and the TIP:

backrest of the vehicle seat.

2. Move the headrest of the vehicle seat into the top position.

* The insertion aids facilitate the installation of the child safety seat with the use of the

ISOFIX fastening points and prevent damage to the car seat covers. As long as they are

not used, remove them and keep them in a safe place. For vehicles with a foldable back-

rest, the insertion aids need to be removed before folding the backrest. Any problems

occurring usually come from soiling or external objects on the insertion aids and on the

hook. Remove soiling or external objects to rectify such problems.

6. PREPARATORY WORK

7. INSTALLATION OF THE CHILD SAFETY SEAT

1. PREPARING THE ISOFIX

1.1 Pull the grey fabric loop 15

until the ISOFIX

locking arms 16 are fully extended.

1.2 Push the green safety button 06 and the red

release button 05 on both sides of the seat

towards each other. This ensures that both

hooks on the ISOFIX locking arms 16

are

open and ready to use.

8. USING THE CHILD SAFETY SEAT

2. PREPARING THE TOP TETHER

2.1 Remove the top tether 13 from the user and

operating instructions compartment 14 and

place it over the child safety seat.

Only remove the red rubber band if the TIP:

length of the top tether 13 is not sucient for

your vehicle model.

2.2 Place the child seat facing forward (in the

direction of travel) on a suitable vehicle seat.

Adjust the backrest angle of the car seat so

that the gap between the car seat and the

child safety seat is as small as possible.

2.3 Take the top tether 13 and press the metal

tongue 26 away from the harness in order

to make the harness longer and pull the top

tether 13 on the snap-in hook 22 until it

forms a V shape.

2.4 Guide the top tether 13 on the left and right

side up to the headrest.

3. FASTENING THE TOP TETHER

Fit the snap-in hook 22 into the top-tether

anchoring point recommended in your vehicle's

operating instructions.

CAUTION! Make sure that you do not use

the luggage hooks instead of the top-tether

anchoring points. Look for the following symbol

in your vehicle:

4. FASTENING THE ISOFIX

4.1 Position the two ISOFIX locking arms 16

directly in front of the two insertion aids 02.

4.2 Push both ISOFIX locking arms 16 into the

insertion aids 02 until the ISOFIX locking

arms 16 engage on both sides with a click-

ing sound.

DANGER! The green safety button 06

must be visible on both sides so that the

child safety seat is correctly fastened.

5. PUSHING THE CHILD SAFETY SEAT UNTIL

SECURE

Push the child safety seat ﬁrmly backwards as far

as it will go.

6. CHECKING THE FASTENING

Shake the child safety seat to ensure that it is

securely fastened and check the safety buttons

06 to make sure that the two indicators are fully

on in green.

7. TENSIONING THE TOP TETHER

Tighten the belt strap of the top tether 13 , until

the belt tension indicator 23 turns green and the

top tether 13 is taut.

8. SECURING YOUR CHILD

Carry out the steps speciﬁed in Section 8, "US-

ING THE CHILD SAFETY SEAT".

1. LOOSENING THE SHOULDER STRAPS

To loosen the shoulder straps, press the adjust-

ment button 09 and, at the same time, pull both

shoulder straps 08 forward.

IMPORTANT! Do not pull the shoulder

pads 07.

2. OPENING THE HARNESS BUCKLE

To open the harness buckle 04 , press the red

button on the harness buckle.

5. ADJUSTING THE HEADREST

A correctly adjusted headrest 03 ensures opti-

mum protection for your child in the child safety

seat:

The headrest 03 must be adjusted so that the

shoulder straps 08 are at the same level as your

child’s shoulders or slightly higher.

To adjust the headrest:

5.1 Pull the adjusting ring 12 of the head rest 03

upwards.

5.2 Move the headrest 03 to the correct shoul-

der strap height and make sure it is correctly

fastened by moving the headrest 03 down

slightly.

3. POSITIONING CHILD IN THE SEAT

Place your child in the child safety seat.

Make sure that the buckle 04 is folded forwards

and place your child in the child safety seat.

4. FITTING THE SHOULDER STRAPS

Lay the shoulder straps 08 over your child's

shoulders.

WARNING!

Do not twist or swap the shoulder

straps, as this will invalidate the protective function.

6. FASTENING THE HARNESS BUCKLE

Bring the two buckle tongues 24

together and in-

terlock them before inserting them into the harness

buckle 04 – you must be able to hear a "click"

noise when doing this.

7. TENSIONING THE ADJUSTING STRAP

Pull the adjusting strap 10 until the strap lies ﬂat

and snug on your child’s body.

WARNING!

The hip belt must lie as low as pos-

sible over your child’s groin.

• the child safety seat is securely fastened

• the top tether 13 is taut over the backrest of the car seat and the

belt tension indicator 23 is green

• the harness of the child safety seat is ﬁtted snugly to the child’s

body without being constricting

• the shoulder straps 08 are correctly adjusted and the straps are

not twisted

• the shoulder pads 07 are in the correct position on your child’s

body

• the buckle tongues 24 are fastened into the harness buckle 04 .

DANGER! If your child tries to open the ISOFIX safety buttons 06

the

harness buckle 04 stop as soon as possible. Check whether the child safety

seat is correctly fastened and ensure that your child is correctly secured.

Explain to your child the dangers associated with their actions.

1. Loosen the top tether 13 by pushing away the metal tongue 26

from the

harness.

2. Unhook the snap hook 22 from the anchoring point in the vehicle and lay

the top tether 13 to the front over the child safety seat.

3. Loosen the ISOFIX fastening on both sides by pressing the green safety

button 06 and the red release button 05 towards each other.

4. Pull the seat forwards and stow the top tether 13 in the operating instruc-

tions compartment 14.

5. Move the ISOFIX locking arms 16 back into the seat shell 17 .

TIP: The ISOFIX locking arms are protected against damage once they are

put back into the seat bottom.

DANGER! Remove the child safety seat from the vehicle. Never transport

the child safety seat in the car if it is not fastened properly.

Please observe the waste disposal regulations in your country.

Disposal of packaging Container for cardboard boxes

Seat cover Residual waste, waste incineration

Plastic parts To be placed in the corresponding

container according to labelling

Metal parts Container for metals

Belt straps Container for polyester

Buckle and tongue Residual waste

9. ADJUSTING THE SEAT ANGLE

The seat shell of the

TRIFIX i-SIZE

can be used in three dierent reclined posi-

tions:

To adjust the seat angle:

Push up the adjusting handle 09 and pull / slide the

seat shell 17 into the desired position.

DANGER! The seat shell 17 must engage se-

curely regardless of its position. Pull up on the seat

shell 17 to ensure that it is engaged.

TIP: You can even adjust the reclined position of

the seat shell 17 while your child is sitting in the

child safety seat.

►The shoulder straps 08 must be adjusted so that

they run horizontally or just above your child’s

shoulders.

►The shoulder straps 08 are not allowed to run

behind your child’s back, or level with/above their

ears.

Before each car journey, in order to ensure your child’s

safety, make sure that:

• the child safety seat is fastened in the ISOFIX fastening points 01 on both

sides with the ISOFIX locking arms 16 and both safety buttons 06 are

completely green

11. DISPOSAL

10. REMOVING THE CHILD SAFETY SEAT

0201

If you have any further questions regarding the use of the carrier,

please feel free to contact us:

Produktspezifikationen

Marke:	Römer
Kategorie:	Autositz
Modell:	TRIFIX i-SIZE

Brauchst du Hilfe?

Wenn Sie Hilfe mit Römer TRIFIX i-SIZE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Autositz Römer

Römer EVOLVA 1-2-3 plus Bedienungsanleitung

14 Oktober 2024

Römer BABY-SAFE plus SHR II Bedienungsanleitung

27 September 2024

Römer duoplus isofix Bedienungsanleitung

15 August 2024

Römer BABY-SAFE ISOFIX BASE Bedienungsanleitung

9 August 2024

Römer kid fix Bedienungsanleitung

6 August 2024

Römer TRIFIX i-SIZE Bedienungsanleitung

5 August 2024

Römer EVOLVA 1-2-3 Bedienungsanleitung

31 Juli 2024

Römer baby safe plus Bedienungsanleitung

31 Juli 2024

Römer Kid Bedienungsanleitung

24 Juli 2024

Römer Adventure Bedienungsanleitung

17 Juli 2024

Bedienungsanleitung Autositz

Neueste Bedienungsanleitung für -Kategorien-

Lorelli Jupiter Bedienungsanleitung

5 Oktober 2024

Joie i-Prodigi Bedienungsanleitung

30 September 2024

Cosatto Zoomi Bedienungsanleitung

24 September 2024

Cosatto Axkid Minikid 4 Bedienungsanleitung

24 September 2024

Cosatto All in All Ultra Rotate i-Size Bedienungsanleitung

24 September 2024

Cosatto All in All 360 Rotate i-Size Bedienungsanleitung

24 September 2024

Cosatto Acorn 2 i-Size Bedienungsanleitung

24 September 2024

Xadventure Junior Isofix Bedienungsanleitung

23 September 2024

Bébé Confort Ever Fix Bedienungsanleitung

21 September 2024

Maxi-Cosi FamilyFix 360 - 2021 Bedienungsanleitung

20 September 2024