Rodcraft RC7173 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Rodcraft RC7173 (36 Seiten) in der Kategorie Schleifmaschine. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/36
Operators Manual
RC7172 / RC7172 / RC7173
Angle Grinders
WARNING
To reduce risk of injury, everyone using, installing, repairing, maintaining,
changing accessories on, or working near this tool must read and
understand these instructions, as well as separately provided safety
instructions part number 8956000278, before performing any such task.
06/2015
8956001105 Rev 01
Fig. 1
Air Diagram:
Model
Speed Power Wheel Spindle
thread
Air consumption
Weight Dimension
L×W Air Inlet. Inner hose
diameter
Sound
Pressure
Sound
Power
Vibrations
Average Continu-
ous ahd k
[RPM] [HP]
[W]
[inch]
[mm] /[NI/min]
[SCFM]
[lb.]
[kg]
[in.]
[mm] [in.] [in.] [dB(A)] [dB(A)] [m/s
2] [m/s2]
1 2 3 4 56 7 8 9 10 11 12 13
RC7171
1200 0.93
700
3.9
100 M10
324
11
540
19
1.4
9.6x3.1
245x80 1/4”NPT 10 84 95
7.2 1.9
RC7172 4.5
115 M10 1.5 9 3.5
RC7173 4.9
125 M14 1.5 9.4 2.4
Fig. 2
A
i
r
S
p
l
y
D
i
r
m
1
/
2
"
(
1
2
m
m
)
3
/
8
"
(
1
0
m
m
)
3
/
8
"
(
1
0
m
m
)
3
/
8
"
(
1
0
m
m
)
1
/
2
"
(
1
2
m
m
)
1
/
2
"
(
1
2
m
m
)
1
/
2
"
(
1
2
m
m
)
3
/
8
"
(
1
0
m
m
)
3
/
8
"
(
1
0
m
m
)
1
30
9
0
0
L
Start
1.Technical Data
Model
Speed Power Wheel Spindle
Thread
Air Consumption
Weight Dimension
LXH Air Inlet Inner Hose
Dia.
Sound pressure
LpA
Sound power
LwA
Vibrations
ahd K
Average continu-
ous
L
W
H
1 2 3 5 6 7 8 9 10 11 12 13 14
[RPM] [Hp]
[W]
[inch]
[mm] /[l/min]
[SCFM]
[kg]
[lb]
[inch]
[mm] [inch] [inch] [dB(A)] [dB(A)] [m/s²] [m/s²]
max. pressure 6.3bar(90psi)
ah : Vibration level, Uncertainty ; k L
pA Sound pressure dB(A), KpA K= WA
= 3 dB Uncertainty.
Declaration of noise and vibration statement (ISO 15744 and ISO 28927-10)
All values are current as of the date of this publication. For the latest information please visit www.cp.com.
These declared values were obtained by laboratory type testing in accordance with the stated standards and are suitable for comparison with the declared
values of other tools tested in accordance with the same standards. These declared values are not adequate for use in risk assessments and values measured
in individual work places may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way
the user works, the workpiece and the workstation design, as well upon the exposure time and the physical condition of the user. We, CHICAGO PNEUMATIC
TOOLS , cannot be held liable for the consequences of using the declared values, instead of values refl ecting the actual exposure, in an individual risk
assessment in a work place situation over which we have no control. This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
An EU guide to managing hand-arm vibration can be found at www. pneurop.eu/uploads/documents/pdf/PN3-02-NV_Declaration_info_sheet_0111.pdf. We
recommend a programme of health surveillance to detect early symptoms which may relate to noise or vibration exposure, so that management procedures can
be modifi ed to help prevent future impairment.
2. Machine type(s)
This product is designed for removing material using abrasives. No other use permitted. For professional use only.
Please read the instructions carefully before starting the machine.
3. Operation
Fix the accessories properly to the tool.
Connect device as shown in Fig. 01.
To use a backing plate, it must be screwed tightly to the drive spindle.
Remove the wrench for tightening prior to operating the machine.
To start the machine, pull the trigger (A). Machine speed is increase by increasing pressure on the trigger. Release the trigger to stop.
4. Lubrifi cation
Motor
Only use RODCRAFT accessory air oil
Clean air intake nipple before use
Fill air oil (approx. 3 drops) into the air intake nipple and briefly operate the machine.
Follow abovementioned steps before and after using the machine. This increases the machine‘s service life.
5. Maintenance instruction
Follow local country environmental regulations for safe handling and disposal of all components.
Maintenance and repair work must be carried out by qualified personnel using only original spare parts. Contact the manufacturer or your nearest authorised
dealer for advice on technical service or if you require spare parts.
Always ensure that the machine is disconnected from energy source to avoid accidental operation.
Disassemble and inspect the tool every three 3 months if the tool is used every day. Replace damaged or worn parts.
6. Disposal
The disposal of this equipment must follow the legislation of the respective country.
All damaged, badly worn or improperly functioning devices MUST BE TAKEN OUT OF OPERATION.
Repair only by technical maintenance staff.
7. Declaration of conformity
We : Rodcraft Customer Center - Langemarckstr.35 bis 45141 Essen- Germany
Machine type(s): Angle Grinder
Declare that the product(s): RC7171, RC7172, RC7173 Serial Number: 01-12
Origin of the product : TaÏwan
is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating : to “Machinery“ 2006/42/EC (17/05/2006)
applicable harmonised standard(s) : EN ISO 11148-7:2012
Name and position of issuer : Pascal Roussy (R&D Manager)
Place & Date : Saint-Herblain, 30/06/2015
Technical fi le available from EU headquarter. Nicolas Lebreton R&D manager CP Technocenter 38, rue Bobby Sands - BP10273 44800 Saint Herblain - France
Copyright 2015, Rodcraft
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers and drawings.
Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.
Original Instructions
EN English (English) 5&5&5&
$QJOH*ULQGHU


Produktspezifikationen

Marke: Rodcraft
Kategorie: Schleifmaschine
Modell: RC7173

Brauchst du Hilfe?

Wenn Sie Hilfe mit Rodcraft RC7173 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Schleifmaschine Rodcraft

Bedienungsanleitung Schleifmaschine

Neueste Bedienungsanleitung für -Kategorien-