Roadstar CLR-2860CD Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Roadstar CLR-2860CD (21 Seiten) in der Kategorie Radios. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/21
MMI of CLR-2860UMP
___________________________________________________________________________________________________________
1
CLR 2860CD
Kitchen Alarm Clock with PLL FM RDS Radio
And CD player
INSTRUCTION MANUAL
Please read the safety and operation instructions before using the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the
presence of un-insulated “dangerous voltage“ within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING :
TO REDUCE THE RISK OF FIRE OR ELECTIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
-DO NOT REMOVE EXTERNAL CASING TO EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE
WITHIN.
-IF THE SUPPLY CORD IS DAMAGED, OR YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT
AN AUTHORISED REPAIRER. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED.
-USE OF CONTROLS OR ADJUSTMENT OR PERFORMANCE OF PROCEDURE OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS SITUATION.
-DO NOT INSTALL THIS EQUIPMENT IN A CONFINED SPACE, SUCH AS A BOOK CASE OR BUILT IN CABINET.
-THIS EQUIPMENT MUST NOT BE EXPOSED TO DRIPPING OR SPLASHING.
The crossed out “Wheelie bin” is intended to show that this appliance must not be placed with ordinary household
waste.
When this appliance has reached the end of its useful life. It must be disposed of in accordance with
local by-law s. Consult our local waste disposal a uthority (WEEE Directive)
MMI of CLR-2860UMP
___________________________________________________________________________________________________________
2
CLR-2860CD Kitchen Radio with CD player
General Description
1. FM radio by Digital Tuning System (DTS) with PLL technology
2. RDS feature provide radio station name display & automatic time up-date
3. CD playback function provided
4. Negative LCD Display with Blue back light
5. 12/24 Hour clock display format (User select at mode key)
6. Built in calendar with auto leap year handling within 2000-2099
7. Alternative display of clock and date is programmable
8. 2 alarms which can be set to 4 alarm mode (daily, weekday, week-end or one day
independently)
9. AOT (Auto OFF Timer) function available up to 90 Minutes
10. Alarm output can be set to radio , CD or buzzer
11. Ascending Alarm for the buzzer sounds progressively faster in 4 levels
12. SDA (Special Date Alert) function
13. Backup battery (3V) for keeping preset data and clock running
14. 64 preset radio station for total 2 different user
15. Automatic/Manual search Up/Down features are provided
16. A.M.S.(automatic memory store) & Memory review function provided
17. Electronic Volume Control provided
18. Easy step key-lock function to prevent accidental keying
19. back light with high-low dimmer
20. Radio frequency range: 87.5 - 108.0MHz
21. Remote control function provide
22. AUX in function provide for play back external audio product
23. When the unit no voice output last in 15 minutes on CD mode and AUX IN mode, it will be
entered the stand-by mode.
24 Working both table & under cabinet
INSTALLATION
MMI of CLR-2860UMP
___________________________________________________________________________________________________________
3
With the supplied mounting plate you can install the appliance under, for example, a wall cupboard . For the
installation of the appliance proceed as follows:
Slide the mounting plate to the rear and remove the mounting plate.
Select a suitable installation location for the appliance ( see also the section Set-up location requirement).
Hold the mounting plate under the installation location. Thereby the front edge of the mounting plate
should be approx. 2.2cm behind the front of the cupboard so that, after the installation, the appliance is
flush with the cupboard.
Mark the 4 securing points with a pencil.
Using a spike or nail, make a small depression at the retaining lug into the respective depression on the
mounting plate.
Firmly screw the mounting plate on with the supplied screws(see illustration)
Place the appliance aslant, with the recesses in the top face of the appliance, in the mounting plate until
the appliance audibly locks into place.
Check to ensure that the appliance is securely seated.
Key List:
1. Power: Power on/Off
2. Open : Control of CD tray
3. UP | FF Station tune up and forward of CD playback:
4. DOWN|RW Station tune down and backward of CD play back:
5. Mode | Stop Mode set and Stop of CD playback:
6. MEM.Scan/AMS | Pause /Play Preset Station review ,AMS, Play & Pause of CD play back:
7. AL1/VOL- Alarm 1 setup and Volume decrease:
8. AL2/VOL+ Alarm 2 setup and Volume increase:
9. Preset+ / Repeat Call back preset station for up:
10. Preset- Call back preset station for down:
11. Prog. /MEM Station Memory:
12. FUNC/user CD AUX FM selector / user select: 、 、 、
13. AOT/Dim Automatic Off Timer and Dimmer control:
14. Timer Opera for timer function
1 Start to Using the device
When unit is powered up first time, Automatic update function will start automatically and “PLEASE WAIT FOR
SETTING THANKS “is flashing on LCD, When press any key to terminate this function.
Note: When unit is powered up first time, Automatic update function will start automatically in 3~5
minutes. If the signal is received, time display on LCD accordingly
When the automatic system setting had been terminate by user, the date and clock are
defaulted to 01.01.2012 ,0:00.
12
7
8
14
13
1
5
11
6
9
10
4
3
2
Produktspezifikationen
Marke: | Roadstar |
Kategorie: | Radios |
Modell: | CLR-2860CD |
Display-Typ: | LCD |
Timer: | Ja |
Breite: | 259 mm |
Tiefe: | 212 mm |
Gewicht: | 1400 g |
Mitgelieferte Kabel: | AC |
Produktfarbe: | Silber |
Höhe: | 75 mm |
Energiequelle: | Wechselstrom/Batterie |
Tunertyp: | Digital |
Unterstützte Bänder: | FM, PLL |
Anzahl voreingestellter Stationen: | 64 |
RMS-Leistung: | 3 W |
AC Eingangsspannung: | 230 V |
AUX-Eingang: | Ja |
Playback MP3: | Nein |
Lautstärkeregler: | Digital |
Verpackungsbreite: | 340 mm |
Verpackungstiefe: | 252 mm |
Verpackungshöhe: | 114 mm |
Kopfhörerausgang: | Nein |
Unterstützte Medien: | CD, CD-R, CD-RW |
Wiedergabemodi: | Fast forward, Fast reverse, Folder, Intro, Program, Random, Repeat folder, Repeat one |
Autom. digitales Tuning: | Ja |
Farbe der Hintergrundbeleuchtung: | Blau |
Optisches Laufwerk - Typ: | Spieler |
Kassettendeck: | Nein |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Roadstar CLR-2860CD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Radios Roadstar
25 April 2023
25 April 2023
25 April 2023
25 April 2023
25 April 2023
25 April 2023
25 April 2023
25 April 2023
25 April 2023
8 Oktober 2022
Bedienungsanleitung Radios
- Radios Manta
- Radios Medion
- Radios Nedis
- Radios Philips
- Radios Sandstrøm
- Radios SilverCrest
- Radios Sony
- Radios Tevion
- Radios Panasonic
- Radios Makita
- Radios Denver
- Radios ECG
- Radios MarQuant
- Radios Thomson
- Radios Blaupunkt
- Radios Grundig
- Radios Aiwa
- Radios Curtis
- Radios Caliber
- Radios Lenco
- Radios Denon
- Radios JBL
- Radios Krüger And Matz
- Radios TERRIS
- Radios E-Bench
- Radios AudioAffairs
- Radios ICES
- Radios Metronic
- Radios Roberts
- Radios Pure
- Radios Sylvania
- Radios NOXON
- Radios PerfectPro
- Radios Videologic
- Radios Brigmton
- Radios Constellation
Neueste Bedienungsanleitung für -Kategorien-
7 Juli 2024
6 Juli 2024
6 Juli 2024
6 Juli 2024
6 Juli 2024
6 Juli 2024
6 Juli 2024
6 Juli 2024
6 Juli 2024