RIKON 80-820 Bedienungsanleitung
RIKON
Slijpmachine
80-820
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für RIKON 80-820 (24 Seiten) in der Kategorie Slijpmachine. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/24
8 Low Speed 1HP Bench Grinder”
80-820
www.rikontools.com
80-820M1
Operator’s Manual
Record the serial number and date of purchase in your manual for future reference.
Serial Number: ______________________ Date of purchase: ______________________
For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877)884-5167
TABLE OF CONTENTS
Safety Instructions 3 - 8, 13
Electrical Safety 7 - 8
Specifications 8
Carton Contents 9
Overview 10
Assembly Instructions 11 - 12
Operating The Bench Grinder 13 - 15
Maintenance 15
Parts Diagram 16 & 18
Parts List 17 & 19
Troubleshooting 20
Wiring Diagram 21
Accessories 22 & 23
Warranty 23
Page 2
NOTE: The specications, photographs, drawings and information in this manual represent
the current grinder model when the manual was prepared. Changes and improvements may
be made at any time, with no obligation on the part of Rikon Power Tools to modify previously
delivered units. Reasonable care has been taken to ensure that the information in this manual
is correct, to provide you with the guidelines for the proper safety, assembly and operation of
this machine.
PAGESECTION
SAVE THESE INSTRUCTIONS.
Refer to them often.
This owner’s manual is not a teaching aid and is intended to show
assembly, adjustments, and general use.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm. Your risk from exposure to these chemicals
varies, depending on how often you do this type of work. To reduce your exposure, work in
a well-ventilated area and with approved safety equipment, such as dust masks that are
specially designed to lter out microscopic particles.
For more information go to www.P65Warnings.ca.gov/wood.
CALIFORNIA PROPOSITION 65 WARNING:
SAFETY INSTRUCTIONS
Page 3
IMPORTANT! Safety is the single most important consideration in the operation of
this equipment. The following instructions must be followed at all times. Failure to
follow all instructions listed below may result in electric shock, re, and/or serious
personal injury.
There are certain applications for which this tool was designed. We strongly recom-
mend that this tool not be modied and/or used for any other application other than
that for which it was designed. If you have any questions about its application, do not
use the tool until you have contacted us and we have advised you.
Fully read and understand all of these instructions
before assembling and using your new grinder.
Produktspezifikationen
Marke: | RIKON |
Kategorie: | Slijpmachine |
Modell: | 80-820 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit RIKON 80-820 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Slijpmachine RIKON
5 September 2024
Bedienungsanleitung Slijpmachine
- Slijpmachine SilverCrest
- Slijpmachine Cotech
- Slijpmachine Makita
- Slijpmachine Bosch
- Slijpmachine Flex
- Slijpmachine Parkside
- Slijpmachine Vonroc
- Slijpmachine AEG
- Slijpmachine Black And Decker
- Slijpmachine Cocraft
- Slijpmachine FERM
- Slijpmachine Ryobi
- Slijpmachine Skil
- Slijpmachine Trotec
- Slijpmachine Eibenstock
- Slijpmachine Hilti
- Slijpmachine Bort
- Slijpmachine DeWalt
- Slijpmachine Einhell
- Slijpmachine Festool
- Slijpmachine Worx
- Slijpmachine Hikoki
- Slijpmachine Hitachi
- Slijpmachine Hyundai
- Slijpmachine Hazet
- Slijpmachine Kress
- Slijpmachine Max
- Slijpmachine Metabo
- Slijpmachine Stanley
- Slijpmachine Güde
- Slijpmachine Scheppach
- Slijpmachine Workzone
- Slijpmachine United Office
- Slijpmachine Meec Tools
- Slijpmachine Dremel
- Slijpmachine Proxxon
- Slijpmachine Westfalia
- Slijpmachine Profitec
- Slijpmachine Silverline
- Slijpmachine Florabest
- Slijpmachine Baumr-AG
- Slijpmachine Genesis
- Slijpmachine ABB
- Slijpmachine Dolmar
- Slijpmachine Bavaria
- Slijpmachine Brüder Mannesmann
- Slijpmachine Milwaukee
- Slijpmachine Toolcraft
- Slijpmachine Fein
- Slijpmachine Craftsman
- Slijpmachine Powerplus
- Slijpmachine Alpha Tools
- Slijpmachine Ozito
- Slijpmachine Kawasaki
- Slijpmachine Solo
- Slijpmachine Ridgid
- Slijpmachine Duro Pro
- Slijpmachine Ergofix
- Slijpmachine Gamma
- Slijpmachine Global
- Slijpmachine Goon
- Slijpmachine Bunn
- Slijpmachine Meister Craft
- Slijpmachine Yamato
- Slijpmachine Victoria Arduino
- Slijpmachine Einhell Bavaria
- Slijpmachine McKenzie
- Slijpmachine Rodcraft
- Slijpmachine Handwerk
Neueste Bedienungsanleitung für -Kategorien-
16 September 2024
15 September 2024
14 September 2024
11 September 2024
11 September 2024
9 September 2024
8 September 2024
7 September 2024
7 September 2024
7 September 2024