Ridgid CrossChek Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ridgid CrossChek (23 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 83 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/23
CROSSCHEKâ„¢
Inspection
System
• Français – 6
• Castellano – pág. 13
CROSSCHEK™Operator’s Manual
WARNING!
Read this Operator’s Man ual
carefully before using this
tool. Failure to understand
and follow the contents of this
manual may result in electri-
cal shock, fire and/or serious
person al injury.
ii
CROSSCHEKâ„¢
Inspection System
Table of Contents
Safety Symbols.....................................................................................................ii
CROSSCHEKâ„¢ Inspection System Safety Warnings .......................................1
Description, Specifications and Standard Equipment
Description.........................................................................................................1
Specifications.....................................................................................................1
Standard Equipment..........................................................................................2
Assembly ..............................................................................................................2
Pre-Operation Inspection ....................................................................................3
Set-Up and Operation ..........................................................................................3
Storage..................................................................................................................5
Service and Repair...............................................................................................5
Disposal ................................................................................................................5
Lifetime Warranty.................................................................................Back Cover
*Original Instructions - English
Safety Symbols
In this operator’s manual and on the product, safety symbols and signal words are used to
communicate important safety information. This section is provided to improve understand-
ing of these signal words and symbols.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey
all safety messages that follow this symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could result in minor
or moderate injury.
NOTICE indicates information that relates to the protection of property.
This symbol means read the operator’s manual carefully before using the equipment. The op-
erator’s manual contains important information on the safe and proper operation of the equip-
ment.
This symbol means always wear safety glasses with side shields or goggles when handling
or using this equipment to reduce the risk of eye injury.
NOTICE
DANGER
WARNING
CAUTION
1
CROSSCHEK
â„¢Inspection System
The EC Declaration of conformity (890-011-
320.10) will accompany this manual as a sep-
arate booklet when required.
If you have any question concerning this
RIDGID®product:
– Contact your local RIDGID distributor.
– Visit www.RIDGID.com or
www.RIDGID.eu to find your local
RIDGID contact point.
– Contact RIDGID Technical Services De -
par t ment at r tctechservices@emer -
son.com, or in the U.S. and Canada call
(800) 519-3456.
Description,
Specifications and
Standard Equipment
Description
The RIDGID®CROSSCHEK Inspection Sys -
tem is designed for use with the SeeSnake®
microDrainâ„¢, nanoReel, microReel and rM-
200 In spection System. It is used to inspect the
straight bores produced by pneumatic under-
ground piercing/boring tools.
The CROSSCHEK Inspection System mounts
to the camera head and pushrod. Once a
bore is completed, the air hose is attached to
the CROSSCHEK Inspection System and
used to pull the camera head through the
bore for inspection. Once the inspection is
completed, a rope is used to retrieve the unit
from the bore and pull the utility to be in-
stalled into place.
Specifications
Bore Capacity
nanoReel ...............13/4" to 3" (45 to 75mm)
Diameter
microDrain, microReel &
rM-200....................2" to 3" (50 to 75mm)
Diameter
Inspection Length....Based on SeeSnake
System
Dimension ...............11/2" D × 251/4" L
(38mm D × 641mm L)
Weight
CROSSCHEK unit
only ........................1.4 lb (0.63 kg)
CROSSCHEKâ„¢
Inspection System
Safety Warnings
WARNING
This section contains important safety
information that is specific to these
tools.
Read these precautions carefully before
using the RIDGID®CROSSCHEK™ Inspec -
tion System to reduce the risk of electri-
cal shock or other serious personal in-
jury.
SAVE THESE INSTRUCTIONS!
Keep this manual with the equipment for use
by the operator.
•Do not use with pressurized hoses.
Connect and disconnect pressure-free
hoses only. Pressurized hoses can whip,
causing striking and other serious injuries.
Always turn OFF the compressor and
bleed all air before connecting or discon-
necting hoses.
•Do not use in the presence of energized
electrical systems. This will reduce the risk
of electrical shock.
•Do not operate in explosive atmos-
pheres, such as in the presence of flam-
mable liquids, gases, or dust. Tools can
create sparks which may ignite the dust or
fumes.
•Always use appropriate personal pro-
tective equipment while handling and
using the CROSSCHEK Inspection Sys -
tem. Appropriate personal protective equip-
ment always includes safety glasses, and
may include equipment such as gloves,
face shields, goggles, protective clothing,
respirators and steel-toed footwear.
•Follow instructions on proper use of
this equipment. Do not use for other pur-
poses. Other uses or modifying this equip-
ment for other applications may increase
the risk of serious injury.
•Read and understand the instructions
and warnings for all equipment being
used including boring tools, cameras
and reels before operating the CROSS -
CHEK Inspec tion System. Failure to follow
all instructions and warnings may result in
property damage or serious personal injury.


Produktspezifikationen

Marke: Ridgid
Kategorie: Nicht kategorisiert
Modell: CrossChek

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ridgid CrossChek benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Ridgid

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-