Ridgid 1224 Bedienungsanleitung

Ridgid niet gecategoriseerd 1224

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ridgid 1224 (33 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/33
1224 Threading Machine
•Français – 21
•Castellano – pág. 45
Threading Machine
Manual
1224 Threading Machine
Record Serial Number below and retain product serial number which is located on name plate.
Serial
No.
1224
Threading Machine
WARNING!
Read this Operator’s Manual
carefully before using this
tool. Failure to understand
and follow the contents of
this manual may result in
electrical shock, re and/or
serious personal injury.
Figure 1 – 1224 Threading Machine
Specications
Threading Capacity ....Pipe 1/4" to 4" (6 to 100 mm)
Bolt 1/4" to 2" (6 to 50 mm)
LH Threads ................With proper Die Heads
Motor:
Type.........................Induction Type, Single Phase
(contact RIDGID for three phase
options available)
Power.......................1 1/2HP (1.12 kW)
Volts .........................120 V, 60 Hz; 220/240 V, 50 Hz;
Other Voltages Available (See
RIDGID Catalog)
Operating Speed........12/36 RPM
Controls......................Rotary Type REV/OFF/FOR
(2/0/1) Switch and ON/OFF Foot
switch
Front Chuck ...............Hammer-Type with Replaceable
Rocker-Action Jaw Inserts
Rear Centering
Device........................Cam Action
Die Heads ..................See RIDGID Catalog for Avail a ble
Die Heads
Cutter .........................Model 764, 1/4" - 4", Full-Floating,
Self-Centering Cutter
Reamer ......................Model 744, 1/4" - 4" Blade-Type
Oil System..................5 qt (4,7 l) Self-Priming, Gerotor-
Type, Automatic-Reversing,
Constant Flow
Weight 509 lb (231 kg).........................
Sound Pressure (LPA)* 79 dB(A), K=3
Sound Power (LWA)* 87 dB(A), K=1.5
Standard Equipment
Refer to the RIDGID catalog for details on equipment
supplied with specific machine catalog numbers.
The Threading Machine serial number plate is located on
the end of the base. The last 4 digits indicate the month
and year of the manufacture. (12 = month, 14 = year).
Figure 2 – Machine Serial Number
Selection of appropriate materials and instal-
lation, joining and forming methods is the responsibility of
the system designer and/or installer. Selection of improp-
er materials and methods could cause system failure.
Stainless steel and other corrosion resistant materials
can be contaminated during installation, joining and form-
ing. This contamination could cause corrosion and pre-
mature failure. Careful evaluation of materials and methods
for the specific service conditions, including chemical and
temperature, should be completed before any installation
is attempted.
Machine Assembly
WARNING
To reduce the risk of serious injury during use, fol-
low these procedures for proper assembly.
940-713-030.10_REV. G 5
1224 Threading Machine
Centering
Device
REV/OFF/FOR
(2/0/1)
Switch
Chuck Jaw
Handwheel
Carriage
Handwheel
914 Die Head
No. 764
Cutter
No. 744
Reamer
Reservoir Pan
Warning
Label
Foot Switch
No. 200 Stand
Shift Knob
12RPM/36RPM
NOTICE
Warning
Label
Carriage
* Sound measurements are measured in accordance with a standardized test per
Standard EN 62481-1.
- Sound emissions may vary due to your location and specific use of these tools.
- Daily exposure levels for sound need to be evaluated for each application and
appropriate safety measures taken when needed. Evaluation of exposure levels
should consider the time a tool is switched off and not in use. This may signifi-
cantly reduce the exposure level over the total working period.

Produktspezifikationen

Marke: Ridgid
Kategorie: niet gecategoriseerd
Modell: 1224

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ridgid 1224 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung niet gecategoriseerd Ridgid

Ridgid

Ridgid FlexShaft Bedienungsanleitung

6 September 2024
Ridgid

Ridgid HKO-186 Bedienungsanleitung

31 August 2024
Ridgid

Ridgid Raprench 10 Bedienungsanleitung

31 August 2024
Ridgid

Ridgid KT-190 Bedienungsanleitung

31 August 2024
Ridgid

Ridgid Power Spin+ Bedienungsanleitung

25 August 2024
Ridgid

Ridgid RE 600 Bedienungsanleitung

21 August 2024
Ridgid

Ridgid RE 12-M Bedienungsanleitung

21 August 2024
Ridgid

Ridgid UC-60 Bedienungsanleitung

20 August 2024
Ridgid

Ridgid C-14 Bedienungsanleitung

19 August 2024
Ridgid

Ridgid Bench Chain Bedienungsanleitung

16 August 2024

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-

Siemens

Siemens SZ73010 Bedienungsanleitung

17 September 2024
IFM

IFM IF5888 Bedienungsanleitung

17 September 2024
Livarno

Livarno IAN 373572 Bedienungsanleitung

17 September 2024
Autel

Autel MaxiScan MS309 Bedienungsanleitung

17 September 2024
IFM

IFM KG0009 Bedienungsanleitung

17 September 2024
LG

LG PL-F860 Bedienungsanleitung

17 September 2024
Crivit

Crivit IAN 302540 Bedienungsanleitung

17 September 2024
IFM

IFM AC2451 Bedienungsanleitung

17 September 2024
Aqua Joe

Aqua Joe AJYP100 Bedienungsanleitung

17 September 2024
Texas Instruments

Texas Instruments SN74LV125APWR Bedienungsanleitung

17 September 2024