Readynet WRT150N Bedienungsanleitung

Readynet Router WRT150N

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Readynet WRT150N (4 Seiten) in der Kategorie Router. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Quick Installation Guide
WRT15
Wireless R
Step 2: Basic Wireless Settings
The pre-congured settings on Figure 3 to the right
will be appropriate for most settings. You might want
to change the Network Name (ESID) and Frequency
(Channel) fields. Click ‘Advanced’ and then
‘WiFi Basic Setup’. To edit the Wireless broadcast ID,
change the “Network Name (SSID)” field and click
the ‘Apply’ button at the bottom of the page.
Click ‘Next’ to move to the final step.
Step 3: Wireless Security Setup
This nal step allows you to prevent unauthorized
use of your wireless network by conguring an
encryption method and a pass-phrase that only you
know. Click the ‘Advanced’ link and then the
‘WiFi- Security Setup’. If, for example, you want to
use WPA2-PSK as the Security mode, automatic
cipher, and abcxyz123 as the pass-phrase, your
setting would be like the following image. First set
the ‘Security Mode’ to WPA, then in the WPA
section below, change the ‘Pass Phrase’ to abcxyz123.
D. Setting Up Your Wireless Devices
Your wireless devices (desktop, laptop, iPad,
smart-phone, etc.) must be congured to work with
your wireless router. Each of these devices must have
an internal or external wireless adapter and applicable
drivers. User guides for each of these devices should
have instructions for wireless set up. You will need
the SSID and password you assigned to this wireless
router during router set up. For each wireless device,
access the setup menu, choose the appropriate
SSID from the list of wireless networks, enter your
password, and test the wireless connection.
Figure 3
Figure 4
A. Connect the WRT150N Router to Your Computer
1. To set up your router for the
rst time, please connect the
router to your desktop or laptop
computer as shown in the
following diagram. Your
broadband Internet access will
generally be from a cable modem,
ADSL modem, or similar device.
2. After the hardware connections have
been completed, check the status of the LED
Indicators using the following table:
Note: If the LED indicator is not displaying a “Normal Status” as described in the table above, please check the
associated hardware and connections.
Safety Notice
• Thedeviceshouldbeplacedonaathorizontalsurface,orsecuredsafelytoawall.
• Operateequipmentawayfromheatsources.
• Providegoodairventilation.
• Keepawayfromwateranddampareas.
• Disconnectpowerfromthedeviceduringseverethunderstorms.
• UseonlytheincludedACpoweradapter.
• Keeprouteratleast20cmawayfrompeopletoreduceexposuretoradiofrequencyemissions.
B. Congure Your Computer to Operate with the WRT150N Router
1. The network settings of your computer
operating system must be set to automatically
obtain an IP address and to automatically
obtain a DNS Server Address.
2. Type in the Address “http://192.168.11.1”
eld of your web browser and press the
“Enter” key. A User Name and Password dialog
box will appear. The default User Name is
“admin” and the default password is “admin”.
Enter the user name and password then click
the “Login” button.
Note: The default wireless IP address for the
wireless router is and the default 192.168.11.1
Subnet Mask 255.255.255.0 is
C. Congure Your WRT150N Router
1. WAN Connection Protocol
The default WAN connection Protocol is
‘Dynamic IP Address’. Continue with this step
only if you need to use a WAN connection
protocol other than ‘Dynamic IP Address’.
To change the WAN connection protocol
click the ‘WAN’ link. Now select the
appropriate WAN connection method.
Finally you might need to enter protocol
specic settings given to you by your ISP.
Click ‘Apply’.
Broadband
Internet
Acess
WAN
POWER
LAN
Desktop PC
Figure 1
Figure 2
LED Indicator Description Normal Status
PWR Power Status Indicator Steady Light
Wi Wireless Status Indicator Steady Light or Slow Flashing
WPS Wi-Fi Protected Status Indicator OfforFlashingWhenPairing
WAN Broadband Network Status Indicator Steady Light or Slow Flashing
LAN 1-4 LAN Indicator Steady Light or Slow Flashing


Produktspezifikationen

Marke: Readynet
Kategorie: Router
Modell: WRT150N

Brauchst du Hilfe?

Wenn Sie Hilfe mit Readynet WRT150N benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Router Readynet

Bedienungsanleitung Router

Neueste Bedienungsanleitung fĂźr -Kategorien-