RDL ST-MX3 Bedienungsanleitung

RDL Stabmixer ST-MX3

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für RDL ST-MX3 (2 Seiten) in der Kategorie Stabmixer. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
STICK-ON® SERIES
Model ST-MX3
Line Level Mixer
ï‚· Mix Line-Level Signals
ï‚· Three Individually Adjustable Inputs
ï‚· Add Additional Inputs to an Existing Mixer
ï‚· Combine Signals of Different Level,
Impedance or Bal. / Unbal. Configuration
ï‚· Low-Noise and Low-Distortion Performance
ï‚· RDL SupplyFlexâ„¢ Power Input Configuration
The ST-MX3 is part of a group of products in the STICK-ON series from Radio Design Labs. The durable adhesives provided with the ST-MX3
permit permanent or removable mounting. Numerous available mounting accessories, brackets, rack-mount and table top chassis are optionally
available to facilitate any system. The ST-MX3 gives you the advantage of a high performance audio mixer with a big plus, you can put it where
you need it, and you can combine modules to build larger mixing systems using whatever combination you need! STICK-ONs are designed, built
and rated for continuous duty in professional A/V systems.
APPLICATION: The ST-MX3 is a three-channel audio mixer for combining line-level signals to a
line-level output. Individual level control is provided for each input. Each input features a separate
preamplifier circuit, which isolates it from the other inputs. A single-turn trimmer is provided for each of the
three input preamps. Signals from the three preamps are actively summed and fed to the output
line-level driver amplifier. The line-input circuit design of the ST-MX3 allows the inputs to accept either
balanced to unbalanced signals, or either high or low impedance. The output is capable of driving into
either high or low impedance, balanced or unbalanced loads. Each output may be connected in parallel
with other ST-MX3s, or ST-UMX3s to form a multi-channel mixer to fit nearly any installation! The ST-MX3
features amplifier circuitry which produces the unsurpassed pure clarity for which Radio Design Labs
products are known! Some features are:
ï‚· Ultra-low Distortion
ï‚· Ultra-low Noise
ï‚· Input Levels Individually Adjustable
ï‚· Ample Headroom at Operating Level
ï‚· Full Operation in either High or Low Impedance Circuits
ï‚· Outputs Short-Circuit Protected
ï‚· Positive Connections via Barrier Block, No Audio Connectors to Wire
The audio clarity, low noise, low distortion and versatility make this module ideally suited to a wide variety
of demanding audio applications. Use this module individually or in conjunction with other RDL modules
as part of a high quality, flexible audio/video system.
RDL ï‚·
ï‚·
ï‚·
ï‚·ï‚· 659 6th St. ï‚·
ï‚·
ï‚·
ï‚·ï‚· Prescott, AZ., USA 86301 ï‚·
ï‚·
ï‚·
ï‚·ï‚· ï‚·
ï‚·
ï‚·
ï‚·ï‚· ï‚·
ï‚·
ï‚·
ï‚·ï‚· (928) 443-9391 FAX (928) 443-9392 www.rdlnet.com
STICK-ON® SERIES
Model ST-MX3
Line Level Mixer
TYPICAL PERFORMANCE
Inputs (3): 30 kΩ balanced or unbalanced bridging
Input Level: -20 dBu to +18 dBu (for +4 dBu output)
-24 dBu to +14 dBu (for 0 dBu output)
Output: 400 Ω to drive low or high impedance balanced or unbalanced lines
Output Level: +4 dBu nominal, (adjustable; unbalanced output 6 dB below balanced line level)
THD+N: < 0.03% (10 Hz to 20 kHz)
Frequency Response: 10 Hz to 20 kHz (± 0.5 dB)
Noise: < -80 dB (all inputs @ 10 dB gain, referenced to +4 dBu)
Headroom: 18 dB
Gain (each input): -14 dB to +24 dB Adjustable
CMRR: > 50 dB (50 to 120 Hz)
Ambient Operating Environment: 0° C to 55° C
Power Requirement: GROUND-REFERENCED or FLOATING, 24 Vdc @ 55 mA
Declaration of Conformity available from rdlnet.com.
Sole EMC specifications provided on product package.
Specifications are subject to change without notice.
Installation/Operation
Radio Design Labs Technical Support Centers
U.S.A. (800) 933-1780, (928) 778-3554; Fax: (928) 778-3506
Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287
891-0008O


Produktspezifikationen

Marke: RDL
Kategorie: Stabmixer
Modell: ST-MX3

Brauchst du Hilfe?

Wenn Sie Hilfe mit RDL ST-MX3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Stabmixer RDL

Bedienungsanleitung Stabmixer

Neueste Bedienungsanleitung für -Kategorien-