Raspberry Pi 7996945 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Raspberry Pi 7996945 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
eRA Connect2Pi Transceiver Dongle Quick Start Guide
Era Connect2Pi Quick Start Guide V1 1 Copyright LPRS 2014 1 |
P a g e
easyRadio Advanced Connect2Pi Dongle Quick Start
Instructions.
These instructions demonstrate the process to get up and running quickly using the connect2Pi radio module from
LPRS on a Raspberry Pi running Rasbian.
It should be possible that other flavours of linux/raspberryPi should be similar.
Step 1:
Plug the Connect2Pi module into either of the USB sockets on the Raspberry Pi
Note: Rasbian and most recent builds of RaspberryPi Distro’s have the FTDI drivers built in.
If yours does not, the easiest fix is to ‘sudo apt upgrade’ and get the latest distribution, otherwise follow this -get dist-
link:
http://www.ftdichip.com/Support/Documents/AppNotes/AN_220_FTDI_Drivers_Installation_Guide_for_Linux%20.
pdf
Step 2: Open up a terminal. At the Prompt type dmesg:
You should get a response containing something like:
Note the line: FTDI USB Serial Device converter now attached to ttyUSB0
eRA Connect2Pi Transceiver Dongle Quick Start Guide
Era Connect2Pi Quick Start Guide V1 1 Copyright LPRS 2014 2 |
P a g e
Step 3:
Install some Python tools that are not included in the Raspbian distro:
At the prompt type: sudo apt-get install python-setuptools
This will allow you to do step 4
Step 4:
Install pyserial module into python 2.x
This will allow you to run a python script which imports the serial module
Type: sudo easy_install -U pyserial
Step 5:
Start programming (From now on this also applies if running Python in windows or on
a mac)
First download easyAsConnect2Pi.py from lprs.co.uk connect2pi download section
Launch ‘IDLE’ (not ‘IDLE3’) from Start>Programming or from the desktop icon
This will open a Python shell.
From the menu choose file>open and navigate to your file:
eRA Connect2Pi Transceiver Dongle Quick Start Guide
Era Connect2Pi Quick Start Guide V1 1 Copyright LPRS 2014 3 |
P a g e
Open the file. A second window will open:
Locate the code (near the top) and modify ttyUSB0 to be the same as you saw
in in step 2
Hit the F5 Key to run (You will be prompted to save the file click ok) –
The Python Shell will now run your code:
Enter the command ER_CMD#T3 and it will respond with the module’s firmware e.g ERA900TRS V3.6.27
All valid commands will be processed and the responses displayed, otherwise they will be treated as data and
transmitted automatically by the radio module.
Explore the file to discover how this is coded and modify for your own purposes.
Other command examples:-
ER_CMD#C? Get Frequency channel
ER_CMD#U? Get Uart value. Default is 19.2 kbps
ER_CMD#P? Get Power level
Note: For complete table of ER commands see document easyRadio Advanced Datasheet 3.6 or later, which
is downloadable from www.lprs.co.uk/easy-radio/downloads.html


Produktspezifikationen

Marke: Raspberry Pi
Kategorie: Nicht kategorisiert
Modell: 7996945

Brauchst du Hilfe?

Wenn Sie Hilfe mit Raspberry Pi 7996945 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Raspberry Pi

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-