Quoizel PCEM1619C Bedienungsanleitung

Quoizel Erleichterung PCEM1619C

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Quoizel PCEM1619C (2 Seiten) in der Kategorie Erleichterung. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Package Contents
Please go to for product cleaning tips. Go to the selection.
Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Integrated 27W LED
: Lutron DVELV-300P or Lutron SELV-300P.
www.quoizel.com Care + Maintenance
Tools Required:
Light Source:
Compatible Dimmer Switches
Estimated Assembly Time:
Preparation:
20-30 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement
parts.
Warnings and Cautions
1of2
Assembly Instruction Sheet #IS-PCEM1619C
For Style PCEM1619C
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Inner Backplate
x 1
A
F
Mounting Screw
x 3
B
Fixture Body
x 1
STEP 1 Attach Inner Backplate to Outlet Box-
A. Attach the Inner Backplate (A) onto the Outlet Box and make four
marks on the ceiling from keyholes on the Inner Backplate (A).
B. Remove the Inner Backplate (A) and drill proper holes on the
ceiling from marks. Insert Wall Anchors (C) into the holes properly.
Attach the Inner Backplate (A) to Outlet Box. Thread Outlet Box
Screws (not Supplied) into mounting holes on the Outlet Box. Pass
Washers (E) over Self-tapping Screws (D) and thread Self-tapping
Screws (D) into Wall Anchors (C). Hand tighten until snug.
Figure 1
2016 QuoizelInc. ReleasedDate:2016-10-10
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
STEP 3 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
White wire
from supply White wire
from fixture
Black wire from
supply (or Red)
Black wire
from fixture
Ground wire
from supply
Ground wire
from fixture
Figure 2
Outlet Box
A
Outlet Box Screw
CWall Anchor
x 3
DSelf-tapping Screw
x 3
EWasher
x 3
C
D
E
Button Stop
Lanyard
Slot
STEP 2 - Attach Lanyard
A. The purpose of the lanyard is to provide the installer a means to
support the fixture from the junction box while connecting the
electrical wires. This enables the fixture to hang from the junction
box and your hands are free to make the wire connections.
B. Turn the Button Stop so it may be inserted into the Inner Backplate
Slot. Make sure the Button Stop is completely inside the Inner
Backplate (A). Slowly release the fixture to make sure it is supported
by the Button Stop. Proceed to the wiring steps in the next step.
Once you are complete with the wiring there is nothing to do with
Lanyard. The Lanyard will push into the junction box when the fixture
is placed for final mounting.
F
A
Figure 3
2of2
2016 QuoizelInc. ReleasedDate:2016-10-10
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
STEP 4 -Attach Fixture Body to Inner Backplate
A. F
. Line up the holes on the side of the eiling
anopy to the mounting holes on the side of the Inner Backplate
(A). Secure them with Mounting Screws (B). Tighten until sung with
screwdrivers.
it supply wires and ground wire in the ceiling canopy of Fixture
Body (F) properly c
c
Your fixture is now assembled and ready to use. Enjoy!
Figure 4
A
B
F
PCEM1619C
FINISH: POLISHED CHROME
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4"
17.75” Dia.
15.75” Dia.
2”
4.5”

Produktspezifikationen

Marke: Quoizel
Kategorie: Erleichterung
Modell: PCEM1619C

Brauchst du Hilfe?

Wenn Sie Hilfe mit Quoizel PCEM1619C benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Erleichterung Quoizel

Quoizel

Quoizel Lansdowne LANS8618MBK Bedienungsanleitung

1 Oktober 2024
Quoizel

Quoizel Regency RGN8617WS Bedienungsanleitung

1 Oktober 2024
Quoizel

Quoizel Desmond DES8624MBK Bedienungsanleitung

1 Oktober 2024
Quoizel

Quoizel Elias PCEIA8532MBK Bedienungsanleitung

1 Oktober 2024
Quoizel

Quoizel Platinum PCDV8603C Bedienungsanleitung

1 Oktober 2024
Quoizel

Quoizel Bartley BART8616MBK Bedienungsanleitung

1 Oktober 2024
Quoizel

Quoizel Haverfield HAV8624C Bedienungsanleitung

1 Oktober 2024
Quoizel

Quoizel Haverfield HAV8633C Bedienungsanleitung

1 Oktober 2024
Quoizel

Quoizel Devon Court DEVN8624MBK Bedienungsanleitung

1 Oktober 2024
Quoizel

Quoizel Pensbury PEN8616MBK Bedienungsanleitung

1 Oktober 2024

Bedienungsanleitung Erleichterung

Neueste Bedienungsanleitung für -Kategorien-

Goobay

Goobay 30780 Bedienungsanleitung

16 Oktober 2024
AFX

AFX Grace GRCP07CBBK Bedienungsanleitung

13 Oktober 2024
AFX

AFX Point PNTP0107L30D1BK Bedienungsanleitung

13 Oktober 2024
Smartwares

Smartwares 20.003.54 Bedienungsanleitung

9 Oktober 2024
Neewer

Neewer TL97C Bedienungsanleitung

8 Oktober 2024
Neewer

Neewer SRP18C Bedienungsanleitung

8 Oktober 2024
Qtx

Qtx Moonglow Bedienungsanleitung

7 Oktober 2024
Blumfeldt

Blumfeldt Shinecube XL Bedienungsanleitung

7 Oktober 2024
Qtx

Qtx HPWash100 Bedienungsanleitung

6 Oktober 2024
BeamZ

BeamZ DJ X5 Bedienungsanleitung

5 Oktober 2024