Quoizel Blaze PCBZ1620C Bedienungsanleitung

Quoizel Verlichting Blaze PCBZ1620C

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Quoizel Blaze PCBZ1620C (2 Seiten) in der Kategorie Verlichting. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
1of2
Assembly Instruction Sheet #IS-PCBZ1620C
For Style PCBZ1620C
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
Package Contents
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
2018 QuoizelInc.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
A
ReleasedDate:2018-03-13
CFixture Body
x 1
Crossbar
Assembly
x 1
Please go to for product cleaning tips. Go to the selection.
LED 29W
20-30 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to ensure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement
parts.
www.quoizel.com Care + Maintenance
Light Source:
Estimated Assembly Time:
Preparation:
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
STEP 1 -Install the Crossbar Assembly to Outlet Box and Adjust
the length of the Nipple
A. Attach the Crossbar Assembly (A) to the Outlet Box with the head of
the Green Ground Screw facing you. Secure it with Outlet Box
Screws (not included), tighten until snug
B. Adjust the hex nut and lock washer underside of the crossbar to the
middle of the nipple.
C. Place the Fixture Body (C) over the nipple against the ceiling to
determine the correct position of the nipple. Thread the Knob (B)
onto the nipple. Adjust the nipple to allow the Fixture Body (C) to rest
against the ceiling when held in place by the Knob (B).
D. Remove the Knob (B) and the Fixture Body (C). Tighten the lock
washer and the hex nut against the crossbar to secure in place.
.
Outlet Box Screw
(not included)
Hex Nut and
Lock Washer
Outlet Box
Green Ground Screw
Figure 1
Nipple
DPanel
x 1
BKnob
x 1
A
B
C
STEP 2 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Figure 2
Green Ground Screw
on the Crossbar
White wire
from outlet box White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
STEP 3 Install Fixture Body-
A. Carefully tuck all wires into the outlet box and position the Fixture
Body (C) over the outlet box. Attach the Fixture Body (C) over the
nipple and secure with the Knob (B). Hand tighten until snug.
C
Outlet Box
Figure 3
Nipple
B
2of2
2018 QuoizelInc.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
ReleasedDate:2018-03-13
STEP 4 Attach Panel to Fixture Body-
A. Remove lock screws with rubber washers from Fixture Body (C).
B. Attach the Panel (D) onto Fixture Body (C) with crystal beads on the
Panel (D) against the Fixture Body (C). Secure the Panel (D) by
threading lock screws with rubber washers back into lock rods and
hand tighten until snug.
Your fixture is now assembled and ready to use. Enjoy!
C
D
Lock Screw
Figure 4
Lock
Rod
Rubber Washer
PCBZ1620C
FINISH: POLISHED CHROME
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4"
20.5” Dia.
19” Dia.
3"

Produktspezifikationen

Marke: Quoizel
Kategorie: Verlichting
Modell: Blaze PCBZ1620C

Brauchst du Hilfe?

Wenn Sie Hilfe mit Quoizel Blaze PCBZ1620C benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Verlichting Quoizel

Quoizel

Quoizel PCSO8525C Bedienungsanleitung

6 September 2024
Quoizel

Quoizel Blade PCBD8526EK Bedienungsanleitung

6 September 2024
Quoizel

Quoizel Twinkle PCTK1616C Bedienungsanleitung

6 September 2024
Quoizel

Quoizel PCSO8532C Bedienungsanleitung

6 September 2024
Quoizel

Quoizel Giselle PCGI8528AB Bedienungsanleitung

6 September 2024
Quoizel

Quoizel Dury RDY1717AWH Bedienungsanleitung

6 September 2024
Quoizel

Quoizel PCLS1722C Bedienungsanleitung

6 September 2024
Quoizel

Quoizel PCLU8515C Bedienungsanleitung

6 September 2024
Quoizel

Quoizel PCSM8532C Bedienungsanleitung

6 September 2024
Quoizel

Quoizel Calvary QF1715EK Bedienungsanleitung

6 September 2024

Bedienungsanleitung Verlichting

Neueste Bedienungsanleitung für -Kategorien-

BeamZ

BeamZ 150.692 Bedienungsanleitung

18 September 2024
Denver

Denver SHL-450 Bedienungsanleitung

17 September 2024
Shada

Shada 300146 Bedienungsanleitung

17 September 2024
Elro

Elro LF502011P Bedienungsanleitung

16 September 2024
Astro

Astro Dakota Plus 300 Bedienungsanleitung

16 September 2024
Livarno

Livarno IAN 103961 Bedienungsanleitung

16 September 2024
Lucide

Lucide Brice-Led Bedienungsanleitung

15 September 2024
DIO

DIO 54790 Bedienungsanleitung

15 September 2024
Smartwares

Smartwares 10.036.84 Bedienungsanleitung

15 September 2024
Livarno

Livarno IAN 293008 Bedienungsanleitung

15 September 2024