Qtx VN2 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Qtx VN2 (6 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 36 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
V-SERIES
VHF Wireless Systems
User Manual
Version 3.3
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
V-Series VHF Wireless User Manual
Introduction
Thank you for choosing the QTX Soun -series wireless system. This professional wireless set provides a high quality d VHF
microphone with VHF radio system for freedom of movement without loss of audio quality. Please read this manual
before using this equipment in order to avoid damage through incorrect operation and to get the best performance from
your purchase.
Contents:
Please take care when unpacking this product. Inspect for any damage and ensure you have the following components…
• VHF wireless receiver
• Mains power adapter
• 6.3mm mono jack lead
• 9V battery, PP3 (2 pieces for VH2, VN2 or VHN2)
• Microphone / transmitter(s) see table below –
Model
Stock code
Microphone 1
Microphone 2
VH1
171.804 UK
Handheld transmitter
-
VH2
171.816 / 171.817 UK UK
Handheld transm ter it
Handheld transmitter
VN1
171.836 / 171.837 UK UK
Neckband mic. + beltpack
-
VN2
171.818 / 171.819 UK UK
Neckband mic. + beltpack
Neckband mic. + beltpack
VHN2
171.810 / 171.811 UK UK
Handheld transmitter
Neckband mic. + beltpack
VL1
171.834 / 171.835UK UK
Lavalier mic. + beltpack
-
Warning
To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.
If liquids are spilled on any component, stop using immediately, allow unit to dry out and have checked by qualified
personnel before further use.
Avoid impact or heavy vibration to any of the components, dropping the microphone can cause capsule failure.
No user serviceable parts inside transmitter or receiver - refer servicing to qualified servi personnel. ce
Safety
• Ensure that the correct adapter is used with adequate current rating and that the mains voltage is as stated on the
adapter.
• Avoid ingress of water or particles into the transmitter(s) or receiver
• Use alkaline or NiMH batteries i the transmitter(s) and remove if unused for long periods. n
• Observe the correct polarity when replacing batteries
Placement
• Keep all components out of direct sunlight and away from heat sources.
• Do not place heavy objects on top of the receiver or tr smitter(s) an
• If rack-mounting, secure the receiver to a 1U rack tray and do not place heavy equipment above the receiver.
• Keep the transmitter(s) and receiver away from damp or dusty environments.
Cleaning
• Use a soft cloth with a neutral detergent to clean the body of the microphone/transmitter and receiver.
• Lightly damp sterile wipes may be used on the microphone grille for hygiene purposes
• To avoid damage, do not use solvents to clean the components
V-Series VHF Wireless User Manual
Handheld Transmitter Beltpack Transmitter
Receiver Rear Panel
Receiver Front Panel
1. Antennas
2. DC power input
3. 6.3mm jack output
4. XLR output
1. Power /OFF switch ON
2. Channel A volume control
3. Channel A indicator LED
4. Power indicator LED
5. Channel B indicator LED
6. Channel B volume control
1. Volume control
2. Slide switch and LED
3. 3.5mm mic hone input jack rop

Produktspezifikationen

Marke: Qtx
Kategorie: Mikrofon
Modell: VN2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Qtx VN2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mikrofon Qtx

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-