Qtx QR12PABT Bedienungsanleitung

Qtx Lautsprecher QR12PABT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Qtx QR12PABT (5 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/5

QR12 PAPABT, QR15 BT

Portable PA

Item ref: 178.8 , 178.847UK 48UK

User Manual

Version 1.2

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

178.8 , 178.8 User Manual 47UK 48UK

Introduction

Thank you for choosing the QRPABT portable PA unit. Please read this manual prior to use to avoid damage to the item.

This versatile portable PA unit is pa d with features in a compact, manageable enclosure and is suitable for a wide cke

array of applications ranging from public address for presentations to outdoor karaoke.

• 15Vdc power adapter with IEC input

• Internal 12V rechargeable battery

• 2 x VHF handheld microphones included

• Guitar / Microphone inputs (6.3mm jack)

• Master 2 band EQ and Echo effect for microphones

• Internal USB/SD/FM/BT media player with record function

• Bluetooth pairing with TWS function

• VCV mic override function

• I.R. remote control for media player

• Integral 35mm pole mount

• AUX line input

Please check the contents to ensure that the product has been received in good condition.

• QRPABT portable PA unit

• 2 x VHF handheld microphone transmitters

• 4 x AA batteries

• IEC mains power lead(s)

• IR Remote control for media player

• User manual

If you find any accessory is missing or the product has arrived with any problems, please contact your retailer at once.

This product contains no user-serviceable parts so make no attempt to try to fix or modify this item yourself as this will

invalidate the warranty. We recommend you keep the original package and proof of purchase for any possible

replacement or returned demand.

Warning

To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture. To prevent electric shock do

not remove the cover. No user serviceable parts inside. Refer servicing to qualified service personnel.

Safety

Prior to connectin the mains adapter, ensure that the supply voltage is correct and the mains lead is in good condition. g

Avoid ingress of water or particles into the enclosure.

If the internal fuse blows, refer the unit to qualified service personnel

If the VHF microphone transmitter is to be unused for a long period of time, remove the batteries and store for later use.

Placement

Keep the unit out of direct sunlight and away from heat sources.

Place the unit in an upright position during use and storage.

Keep the unit away from moisture or dusty environments.

Cleaning

Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls.

To avoid damage, do not use solvents to clean this equipment.

178.8 , 178.8 User Manual 47UK 48UK

Control panel

Powering up

Your n QRPABT unit may arrive with you with the internal battery charged. Before connecting to the mains with the ew

supplied power adaptor, switch the it on and check the POWER LED (18). If it is green, there is charge in the battery. un

If it is red, then you will need to charge the battery before using away from a mains supply.

Connect the QRPABT unit to the mains using the supplied IEC mains lead (22). You may otherwise opt to connect the DC

input jack (21) to an external 12- Vdc supply, such as a car battery, or use the internal battery if charged. 15

When not in use but connected to the mains, if the POWER switch is in the

off

position, the internal battery will be re-

charged from the mains supply. This can be observed by the CHARGE LED (18) which will light orange when charging. ,

When fully charged, the CHARGE LED will change to green.

Note: it is recommended to store the PA unit at an ambient temperature and not with the battery fully discharged.

Initial setup

Turn all VOLUME & ECHO controls down (anti-clockwise) and turn the POWER itch on (the power LED should light). sw

BASS and TREBLE controls should remain pointing vertically (12-o-clock position).

Turn up the main VOLUME control part way and switch VCV off. Your QRPABT unit should now be ready to operate.

VHF Microphone

Ins t the supplied AA batteries into each of the handheld microphones by carefully unscrewing the base and connecting er

the “+” and “ ” terminals o- f the battery to the corresponding contacts inside the microphone body, taking care to observe

the correct polarity. Turn on the VHF receiver (16) and turn the VHF VOL controls (6) up (clockwise) part way.

Switch on each wireless mic in turn the rear panel RF LEDs should light as a result. If the LED on the transmitter lights –

dimly, change the battery. Gradually increase the VHF VOL controls (6), testing each microphone for output through the

speaker. Take care not to incur “feedback” (howling or screeching sound through the speaker) by keeping the

microphone a sensible distance from the speaker and pointing away from the speaker so that it doesn’t

hear

the speaker.

Turning the ECHO control (4) clockwise introduces a pre-set echo function for singing and special effects.

BASS and TREBLE (15, 3) can be cut by turning anti-clockwise or boosted by turning clockwise.

When not in use, switch the handheld transmitters off and remove the batteries if not being used for long periods.

USB port

SD/MMC card slot

TREBLE EQ

ECHO level

Wired MIC / guitar volume

VHF Mic volumes A and B

LINE IN 2 x RCA

Wired MIC.1 / guitar and MIC.2 input 6.3mm jacks

Smart phone / aux input stereo 3.5mm jack

Antenna connection - VHF A Mic

Media player LCD display & IR receiver

Media player mode & transport controls

Main volume

VCV talkover on/off

BASS EQ

VHF wireless receiver on/off

MIX OUT line output 2 x RCA

Battery charge & power LEDs

Power on/off

Antenna connection - VHF B Mic

DC power input jack

IEC power inlet & fuse holder

Produktspezifikationen

Marke:	Qtx
Kategorie:	Lautsprecher
Modell:	QR12PABT
Bluetooth:	Ja
Akku-/Batteriebetriebsdauer:	8 h
Breite:	350 mm
Tiefe:	310 mm
Gewicht:	14000 g
Produktfarbe:	Schwarz
Höhe:	570 mm
Energiequelle:	Battery, DC
RMS-Leistung:	- W
Verpackungsbreite:	398 mm
Verpackungstiefe:	370 mm
Verpackungshöhe:	630 mm
Paketgewicht:	14000 g
Fernbedienung enthalten:	Ja
Menge pro Packung:	1 Stück(e)
Mikrofon enthalten:	Ja
Tieftönerdurchmesser (imperial):	12 "
Eingebauter Verstärker:	Ja
Lautsprecherplatzierung:	Flur
6,35 mm (1/4-Zoll) Eingang:	2
Tragegriff(e):	Ja
Tieftönerdurchmesser:	300 mm
Menge USB 2.0-Anschlüsse:	1
AUX-Eingangs-Ports:	1
Ausgangsleistung des Verstärkers:	100 W