Qtx QA1000 Bedienungsanleitung

Qtx Empfänger QA1000

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Qtx QA1000 (3 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 34 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/3
QA400
QA1000
QA1600
QA2400
Output Max per channel @ 4Ω
200W
500W
800W
1200W
Output RMS per channel @ 4Ω
100W
250W
400W
600W
Output Max per channel @ 8Ω
140W
340W
540W
840W
Output RMS per channel @ 8Ω
70W
170W
270W
420W
Dimensions
88 x 482 x 270mm
88 x 482 x 340mm
88 x 482 x 340mm
88 x 482 x 340mm
Weight (unpacked)
6.8kg
9.1kg
12.3kg
15.4 kg
QA Series Power Ampliers
QA400 (172.020UK)
QA1000 (172.025UK)
QA1600 (172.030UK
QA2400 (172.018UK)
19” Rackmount (2 U)
High power output
Combo XLR/6.3mm jack and RCA inputs
Speaker, 6.3mm jack and binding-post outputs
Fan cooled
Output circuit overload protection
Mains powered via IEC connector
Thank you for purchasing QTX Sound -series power amplier this QA .
This product is intended to give long term, reliable service in normal usage.
Please read these instructions before use to avoid incorrect operation and outline the functions and controls.
(1) VENTILATION GRILLE - Do not cover or restrict airow
(2) - Attenuate output levels CHANNEL A+B LEVEL
(3) - Show signal present, clipping or protect mode INDICATOR LEDS
(4) - Switches mains power on/o POWER SWITCH
No user serviceable parts inside, refer all servicing issues to qualied service personnel.
Clean case with a lint-free dry or slightly damp cloth, keep ventilation grille and fans clear of debris.
Check mains for correct voltage as indicated near to the IEC mains inlet on the rear panel. Connect to mains
supply using the IEC cable provided.
Connect the outputs A+B speakers via speaker connectors, jack or binding posts, ensuring that the minimum to
impedance is no lower than 4 Ω per channel
When using 8Ω speakers, connect the speakers in pairs to each other and then connect one of each pair to an
amplier channel output.
Connect the mixer or audio source to either the combo or RCA input sockets
With channel A+B levels down, switch the power on.
Gradually increase channel levels and check for sound from speakers.
If there is no sound, turn down channel levels, switch o and disconnect mains and check connections if front –
panel PROTECT LEDs are lit, refer to qualied service personnel.
NO OUTPUT -
Check mains power is on and fuse is OK
Check leads and connections
Check PROTECT LEDs are not lit
Check speakers are working on another amplier
DISTORTED OUTPUT -
Reduce the input signal level. Ensure that the amplier output level is within the maximum rating of the
connected speakers and gradually increase the input signal, ensuring that the signal is clean and free from
distortion.
If protect mode is active, refer to qualied service personnel

Produktspezifikationen

Marke: Qtx
Kategorie: Empfänger
Modell: QA1000

Brauchst du Hilfe?

Wenn Sie Hilfe mit Qtx QA1000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Empfänger Qtx

Qtx

Qtx Q240 Bedienungsanleitung

5 Oktober 2024
Qtx

Qtx QA1000 Bedienungsanleitung

12 Juli 2024
Qtx

Qtx Q480 Bedienungsanleitung

7 Mai 2023

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024
Denon

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024
Pro-Ject

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024
AKG

AKG HP12U Bedienungsanleitung

15 Oktober 2024
Sennheiser

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024
Yamaha

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024
JL Audio

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024
Pioneer

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024
Technics

Technics SA-160L Bedienungsanleitung

8 Oktober 2024
Avantree

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024