QSC SR-800 Bedienungsanleitung

QSC Lautsprecher SR-800

Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r QSC SR-800 (8 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war fĆ¼r 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
TD-001574-01-A1
*TD-001574-01*
SR-800
User Manual
SR-800 Surround Loudspeaker
Ā®
2
TD-001574-01-A1
EXPLANATION OF SYMBOLS
The term ā€œWARNING!ā€ indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.
The term ā€œCAUTION!ā€ indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result
in damage to the equipment that may not be covered under the warranty.
The term ā€œIMPORTANT!ā€ indicates instructions or information that are vital to the successful completion of theī˜Ÿprocedure.
The term " " is used to indicate additional useful information.NOTE
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and operating and
maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
1. Keep these instructions.
2. Heed all warnings.
3. Follow all instructions.
4. Do not use this apparatus near water.
5. Clean only with a dry cloth.
6. Do not block any ventilation opening. Install in accordance with the manufacturer's instructions.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliļ¬ers) that produce heat.
8. Only use attachments/accessories speciļ¬ed by the manufacturer.
9. Refer all servicing to qualiļ¬ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
beenī˜Ÿdropped.
10. Adhere to all applicable, local codes.
11. Always keep sound pressure levels in the listening area below levels that can damage human hearing.
Warranty
For a copy of the QSC Limited Warranty, visit the QSC website at www.qsc.com
Introduction
The SR-800 is a compact cinema surround loudspeaker providing high performance for smaller cinemas.
The SR-800 is designed for safe and secure mounting:
ā€¢ Pre-installed hardware allows fast, single-installer, wall mounting with optional wall brackets supporting down-angles of 0Ā° or 8Ā°.
ā€¢ A traditional U-bracket (yoke) (YM-300) is also available.
ā€¢ The rear panel of the cabinet has four M6 threaded insert mounting points that accommodate the standard bolt pattern for most third-party
bracket manufacturers.
Contents
Part Quantity
SR-800 Loudspeaker 1
SR-800 User Manual TD-001574 1
Warranty Document TD-000453 1
3
TD-001574-01-A1
Installing the SR-800
WARNING!: Read and follow these instructions carefully. If the loudspeakers are not suspended
properly, they could fall, causing personal injury and damage to the equipment.
Rules for Suspension
1. Consult a Professional Mechanical or Structural Engineer, licensed in the jurisdiction of the sound system installation, to review, verify, and
approve all attachments to the building or structure.
2. Employ the services of a Professional Rigger for hoisting, positioning, and attaching the equipment to the supporting structure.
3. Correct use of all suspension hardware and components is imperative in sound system suspension and deployment.
4. Always calculate suspended loads before lifting to make sure suspension components and hardware are used within their respective
loadī˜Ÿlimits.
5. Consult local codes and regulations to fully understand the requirements for suspended loads in the venue in which you will suspend
theī˜Ÿequipment.
6. Use only the recommended brackets with the installation points.
7. Be absolutely certain of the integrity of any structural member intended to support suspended loads. Hidden structural members can have
hidden structural weakness.
8. Never assume anything! Owner or third-party supplied suspension attachment points may not be adequate for suspending the loads.
IMPORTANT!: All six threaded inserts (four on the back, one on each side) must have fastening hardware (screws, lock
washer, ļ¬‚at washer) securely installed. The insert holes are open into the enclosure. If a hole is left open it creates an air leak
and the performance of the loudspeaker will be compromised. If the hardware is not securely installed it may rattle and/or
fallī˜žout.
WARNING!: Be sure to read the "Rules for Suspension" before installing the loudspeaker.
Wall Mounting
Refer to Figure 1.
Mount the loudspeaker on the wall using the pre-installed bracket (1) and either a QM-SW wall
bracket or a QM-BW wall bracket. the wall brackets are sold separately.
Refer to TD-000381 Surround Mounting Brackets User Manual for mounting instructions. The
document is delivered with the brackets.
ā€” Figure 1 ā€”
1


Produktspezifikationen

Marke: QSC
Kategorie: Lautsprecher
Modell: SR-800

Brauchst du Hilfe?

Wenn Sie Hilfe mit QSC SR-800 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher QSC

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung fĆ¼r -Kategorien-