QSC AcousticPerformance AP-5122 Bedienungsanleitung

QSC Lautsprecher AcousticPerformance AP-5122

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für QSC AcousticPerformance AP-5122 (40 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/40
AcousticPerformance (AP)
User Guide
AP-5102 — 10" Two-way Trapezoidal Loudspeaker with 105˚axisymmetric coverage
AP-5122 — 12" Two-way Trapezoidal Loudspeaker with 90˚axisymmetric coverage
AP-5152 — 15" Two-way Trapezoidal Loudspeaker with 75˚axisymmetric coverage
AP-5122m — 12" Two-way Multi-purpose Loudspeaker with 90˚axisymmetric coverage
*TD-000369-00*
TD-000369-00-B
EXPLANATION OF SYMBOLS
The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.
The term “ ” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in CAUTION!
damage to the equipment that may not be covered under the warranty.
The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of the procedure.
The term " " is used to indicate additional useful information.NOTE
The intent of the lightning ash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous"
voltage within the product's enclosure that may be of suffi cient magnitude to constitute a risk of electric shock to humans.
The intent of the exclamation point within a triangle is to alert the user to the presence of important safety, and operating and
maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!:
While it is possible for one person to lift a loudspeaker, it is important to use proper lifting techniques. Suggested
reading: OSHA Technical Manual on Back Disorders and Injuries
(http://www.osha.gov/dts/osta/otm/otm_vii/otm_vii_1.html#app_vii:1_2).
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli ers) that produce heat.
Only use attachments/accessories speci ed by the manufacturer.
Refer all servicing to quali ed service personnel.
Adhere to all applicable, local codes.
Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.
2
ENG
TD-000369-00-B
Warranty (USA only; other countries, see your dealer or distributor)
QSC Audio Products 3 Year Limited Warranty
QSC Audio Products, LLC (”QSC”) guarantees its products to be free from defective material and/or workmanship and will replace defective parts
and repair malfunctioning products under this warranty when the defect occurs under normal installation and use, provided the unit is returned to
our factory, one of our authorized service stations or an authorized QSC International Distributor via pre-paid transportation with a copy of proof
of purchase (i.e., sales receipt). This warranty provides that the examination of the return product must indicate, in our judgment, a manufacturing
defect. This warranty does not extend to any product which has been subjected to misuse, neglect, accident, improper installation, or where the
date code has been removed or defaced. QSC shall not be liable for incidental and/or consequential damages. This warranty gives you speci c legal
rights. This limited warranty is freely transferable during the term of the warranty period. The warranty on QSC products is NOT VALID if the products
have been purchased from an unauthorized dealer/online e-tailer, or if the original factory serial number has been removed, defaced, or replaced in
any way. Damage to, or loss of any software or data residing on the product is not covered. When providing repair or replacement service, QSC will
use reasonable efforts to reinstall the product’s original software confi guration and subsequent update releases, but will not provide any recovery or
transfer of software or data contained on the serviced unit not originally included in the product.
Customers may have additional rights, which vary from state to state or from country to country. In the event that a provision of this limited warranty is
void, prohibited or superseded by local laws, the remaining provisions shall remain in effect.
The QSC limited warranty is valid for a period of three (3) years from date of purchase in the United States and many (but not all)
other countries.
For QSC warranty information in countries other than the United States, contact your authorized QSC international distributor. A list of QSC
International distributors is available at www.qscaudio.com.
To register your QSC product online, go to www.qscaudio.com and select ”Product Registration”. Other questions regarding this warranty can be
answered by calling, e-mailing or contacting your authorized QSC distributor.
Phone: 1-800-854-4079 within US and Canada, +1-714-754-6175 international, warranty@qscaudio.com, Email: Website: www.qscaudio.com.
Installing the AcousticPerformance Loudspeakers
Suspending the AP Loudspeakers
WARNING!:
Read and follow these instructions carefully. If the loudspeakers are not suspended properly, they could fall,
causing personal injury and damage to the equipment.
Rules for Suspension
Consult a Professional Mechanical or Structural Engineer, licensed in the jurisdiction of the sound system installation, to review, verify, and approve
all attachments to the building or structure.
Employ the services of a Professional Rigger for hoisting, positioning, and attaching the equipment to the supporting structure.
Correct use of all suspension hardware and components is imperative in sound system suspension and deployment.
Always calculate suspended loads before lifting to make sure suspension components and hardware are used within their respective load limits.
Consult local codes and regulations to fully understand the requirements for suspended loads in the venue in which you will suspend
the equipment.
Use only the recommended yoke or the M10 installation points with the M10 installation kit for suspending the loudspeaker.
Be absolutely certain of the integrity of any structural member intended to support suspended loads. Hidden structural members can have hidden
structural weakness.
Never assume anything! Owner or third-party supplied suspension attachment points may not be adequate for suspending the loads.
Before lifting, always inspect all components (enclosures, suspension brackets, pins, frames, bolts, nuts, slings, shackles, etc.) for cracks, wear,
deformation, corrosion, missing, loose, or damaged parts that could reduce the strength of the assembly. Discard any worn, defective, or suspect
parts and replace them with new appropriately load-rated parts.
3
ENG
TD-000369-00-B
Shock Loading
When a load is either moved or stopped, its static weight is magni ed. Sudden movements can magnify the static weight several times. This
magni cation of static weight is called "shock loading". Shock loading poses a danger to equipment and workers. The effects of shock loading can be
instantaneous, or may remain undetected unless the equipment is visually damaged. Proper preparation for shock loading requires careful planning
and knowledge of equipment, suspension, and lifting practices.
Shock loading of equipment and structures is usually confi ned to lifting and installation, but natural forces (winds, earthquakes, and so on) can impose
shock loads several times the static load. Because of this, structures and suspension equipment must be capable of supporting several times the
weight of the suspended equipment.
Model Weight (kg) Weight (lbs)
AP-5102 21.8 48
AP-5122 29.7 66
AP-5152 36.3 80
AP-5122m 28.6 63
Using Integrated Suspension Points
The Suspension points are located such that the loudspeakers can be hung in any orientation.
Models AP-5102 (10"), AP-5122 (12"), and AP-5152 (15")
15 M10 Integrated Suspension Points.
Two on each side, three on the back, and four on the top, and four on the bottom of the loudspeaker enclosure.
Model AP-5122m
11 Integrated Suspension Points
Three on each side, one on the back, two on the top, and two on the bottom.
NOTE:
The suspension points on AcousticPerformance Loudspeakers are designed for use with the eyebolts (M10, 20 mm) and
washers included in the available M10 accessory kit (model number: M10 KIT-W).
1. Remove the appropriate plugs from the M10 installation points using a 6 mm hex key.
2. Thread an eyebolt into each of the appropriate M10 installation points.
3. Tighten the eyebolts until their shoulders are snug against the enclosure.
4. Continue to rotate the eyebolts until they reach the optimum desired in-line position. Do not overtighten.
5. The loudspeakers are ready for suspension.


Produktspezifikationen

Marke: QSC
Kategorie: Lautsprecher
Modell: AcousticPerformance AP-5122

Brauchst du Hilfe?

Wenn Sie Hilfe mit QSC AcousticPerformance AP-5122 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher QSC

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-