QSC AcousticCoverage Bedienungsanleitung

QSC Lautsprecher AcousticCoverage

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für QSC AcousticCoverage (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
AC-S4T
User Manual
TD-000490-00
TD-000490-00
TD-000490-00
EXPLANATION OF SYMBOLS
The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.
The term “ ” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in damage to the equipment that may not be covered under the CAUTION!
warranty.
The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of the procedure.
The term " " is used to indicate additional useful information.NOTE
The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous" voltage within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to humans.
The intent of the exclamation point within a triangle is to alert the user to the presence of important safety, and operating and maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Only use attachments/accessories specified by the manufacturer.
Refer all servicing to qualified service personnel.
Adhere to all applicable, local codes.
Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.
Warranty
For a copy of the QSC Limited Warranty, visit the QSC Audio Products website at www.qsc.com
Para una copia de la Garantía Limitada de QSC, visite el sitio web de QSC Audio Products, en www.qsc.com
Pour obtenir une copie de la garantie limitée de QSC, visitez le site de QSC Audio Products à www.qsc.com
Besuchen Sie die Webseite von QSC Audio Products (www.qsc.com) um eine Kopie der beschränkten Garantie von QSC zu erhalten.
如果您想要 有限保修的複印本,请造访 音频产品的网站QSC QSC www.qsc.com
Для получения копии ограниченной гарантии QSC посетите веб-сайт QSC Audio Products, расположенный по адресу www.qsc.com.
www.qsc.com    QSC 


   QSC       
TD-000490-00
Set the Transformer Tap Switch
Refer to Figure 1.
1. Use a flat-tip screwdriver to set the transformer tap based on the requirements of the
installation. To bypass the transformer for direct low impedance applications, set the tap
selector to THRU.
Install the Yoke Bracket and Mount the Loudspeaker
Refer to Figure 2.
1. Secure the yoke bracket to structure capable of supporting the weight of the loudspeaker.
2. Align the rubber washer between the loudspeaker and yoke mounting holes and join using
the thumb screw.
Wire the Loudspeaker
Refer to Figure 3.
1. Land the speaker supply wire to the Euroblock connector as indicated.
2. For additional loudspeakers, use the thru output from the previous loudspeaker as the supply.
3. Install the Euroblock connector to the loudspeaker.
100V
16
THRU
THRU
70V
100V
16
4
1
4
2
8
2
16
8
WARNING!: Install the system in accordance with local building codes
and regulations. Use a licensed contractor or professional engineer.
QSC Audio Products is not responsible for damages resulting from the
negligent installation of any bracket or loudspeaker.
— Figure 1 —
— Table 1 —
— Figure 2 —
— Figure 3 —
100 Volt 70 Volt
8 8 Ω Ω
N/A 16W
16W 8W
8W 4W
4W 2W
2W 1W
Parallel Wiring Diagram
Amp
To Additional
Loudspeakers
Input
Speaker #1 Speaker #2 Speaker #3
Thru Input Thru Input Thru
166 mm
[6.5 in] 150 mm
[5.9 in]
230 mm
[9.1 in]
160 mm
[6.3 in]
Specifications:
System Details AC-S4T
Effective frequency range 170 Hz – 20 kHz
Rated noise power / voltage216 watts / 11.3 volts (rms)
Broad-band sensitivity385 dB SPL
Coverage angle (-6 dB) 130° conical (500 Hz - 5 kHz)
Directivity factor (Q) 6
Directivity Index 8 dB
Maximum continuous SPL497 dB
Maximum peak SPL4103 dB
Rated impedance 8 ohms
Recommended amplifier 32 watts
Transformer taps 70 V: 16, 8, 4, 2, 1 watts
100V: 16, 8, 4, 2 watts
8 ohm bypass
LF transducer 100 mm [4 in] Polypropylene woofer
25 mm [1 in] voice-coil
HF transducer 25 mm [1 in] Aluminium dome tweeter
25 mm [1 in] voice-coil
Input connector type Euroblock connector with parallel output
Enclosure material UV treated, high impact ABS polymer
Grille material Powder coated steel
Yoke material Powder coated steel, brass inserts
Enclosure Details
Ingress protection IP-44
Operating environment Designed for indoor use
Operating Temperature Range -20 to 50° C [-4 to 122° F]
Net weight 2.4 kg [5.3 lb]
Product dimensions 230 x 160 x 150 mm [9.1 x 6.3 x 5.9 in]
Shipping weight 5.3 kg [11.8 lb] (pair packed)
Shipping dimensions 292 x 206 x 368 mm [11.5 x 8.1 x 14.5 in] (pair packed)
Included accessories Yoke mount system, euroblock connector
1
Free-field, -10 dB from on-axis sensitivity
2
IEC60268-1 noise signal for 2 hours
3
On-Axis, free-field sensitivity, 2.83V, 1 m
4
Calculated from rated noise voltage and sensitivity


Produktspezifikationen

Marke: QSC
Kategorie: Lautsprecher
Modell: AcousticCoverage

Brauchst du Hilfe?

Wenn Sie Hilfe mit QSC AcousticCoverage benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher QSC

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-