Qazqa 91227 Coney 3 Lamp Bedienungsanleitung

Qazqa Lampen 91227 Coney 3 Lamp

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Qazqa 91227 Coney 3 Lamp (2 Seiten) in der Kategorie Lampen. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Suitable light source:
GU10,Halogen Max 35W
1xGU10 Max.35W
3. 4.
Overall size:
1. 2.
Warning:
When replacing a halogen
lamp, wait for it to cool, for
a minimum of 5 minutes
Coney SL 91223/91224
2xGU10 Max.35W
Overall size:
Coney SL 91225/91226
90
135
80
300
115
66
80
3xGU10 Max.35W
Overall size:
Coney SL 91227/91228
66
168
90
4xGU10 Max.35W
Overall size:
Coney SL 91229/91230
700
80
66
115
220~240V
50Hz
0.5m
Coney SL
INSTRUCTION MANUAL
Max. 50m m ø
GU10
Max.35W
350
90
66
Please study the instruction manual and below information carefully before installing or using
this product. Please keep this user manual for further reference
1. The luminaires may only be installed by authorized and qualified technicians according the valid
regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come
into contact with any areas of the terminal connections or voltage control parts.
3 The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution.
box, before any installation, maintenance or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
6. Take account of the minimal separation distance from other objects and the room required around the fitting.
7. If in any doubt, consult a professional, taking local installation requirements into account. Some countries
stipulate that lighting may be installed only by registered installers.
8. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V
low voltage conductors.
9. When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.
10. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical
components
11. Take account of all available technical information.
12. Take note of the symbols when connecting wires:
N =Neutral L =Live =Earth
13. Meaning of symbols:
III
220~240V
50Hz
Max. 50mm ø
GU10
2Max. 50W
IP
3x
min.0,75mm²
8mm
Light Angle
75mm²
55 º
S
S
S
SSA
A
A
AAF
F
F
FFE
E
E
EET
T
T
TTY I
Y I
Y I
Y IY IN
N
N
NNS
S
S
SST
T
T
TTR
R
R
RRU
U
U
UUC
C
C
CCT
T
T
TTI
I
I
IIO
O
O
OON
N
N
NN
0.5m
For indoor use only, where direct contact with water is impossible
Protection Class I: the fitting must be earthed
Protection Class II: the fitting is doubled insulated and does not require earthing
Protection Class III: the fitting is low voltage
Minimum distance from lighted objects (meters)
Only the self-shielded halogen lamp should be used with the luminaire
Strip the wire to the indicated length (mm)
Connect using the specified cable
The type of lamp and maximum size and wattage indicated in each lighting unit must not
be exceed
The armature is designed to work only with the indicated voltage. Different items require
different working voltage.
The luminaire can be used in combination with a dimmer
The reference light angle and light space of the luminaire
This luminaire cannot be disposed together with normal domestic waste in standard rubbish
can, but you have to bring it to a staging area for electrical waste
This icon indicates the level of water-proof and dust-proof
XXX


Produktspezifikationen

Marke: Qazqa
Kategorie: Lampen
Modell: 91227 Coney 3 Lamp

Brauchst du Hilfe?

Wenn Sie Hilfe mit Qazqa 91227 Coney 3 Lamp benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lampen Qazqa

Bedienungsanleitung Lampen

Neueste Bedienungsanleitung für -Kategorien-