Pyramid Arctic PB617X Bedienungsanleitung

Pyramid Empfänger Arctic PB617X

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyramid Arctic PB617X (14 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/14
PB317X
PB417X
PB617X
PB717X
PB1217X
PB1617X
TWO CHANNEL HIGH PERFORMANCE
POWER AMPLIFIER
FOUR CHANNEL HIGH PERFORMANCE
POWER AMPLIFIER
FOUR CHANNEL HIGH PERFORMANCE
POWER AMPLIFIER
TWO CHANNEL HIGH PERFORMANCE
POWER AMPLIFIER
TWO CHANNEL HIGH PERFORMANCE
POWER AMPLIFIER
FOUR CHANNEL HIGH PERFORMANCE
POWER AMPLIFIER
All Pyramid products are carefully constructed
and thoroughly tested before shipment, products
purchased in the USA are warranted to be free of
defects in material and workmanship for two (2)
years from the date of purchase. This warranty is
limited to the original retail purchase.
Should the product fail due to factory defects in
material or workmanship, your unit will be
repaired or replaced at the sole discretion of
Pyramid.
To obtain warranty service you must first call our
Consumer Return Hotline number at (718) 236-
6948 to obtain a Return Authorization number .
This R . A . # Must appear on the outside of your
package and on all paperwork relating to your
return.
R. A. #
Pyramid Service Center
1600 63RD Street
Brooklyn, NY 11204
You must also include the following items:
A copy of your sales receipt or other proof of
purchase
A brief letter indicating the problem you are
experiencing
include in your letter your return address,
daytime phone number, and R. A. Number
also include a check or order for ＄18,00
for return shipping, handing, and insurance,
or provide your Visa/MC number with
expiration date.
Our obligation under this warranty is limited
to the repair or replacement of the defective
unit when returned to us prepaid. This
warranty will be considered void if the unit
was tampered with, improperly serviced, or
subject to misuse, neglect, or accidental
damage.
user’s manual
Www. pyramidcaraudio. com
limited warranty policy
congratulations...
On your purchase of a Pyramid Arctic Series
amplifier. This amplifier extends the pyramid
tradition into a totally new series of amps, designed
from the ground up to deliver the power,
performance and flexibility the modern car audio
enthusiast demands.
When you check the list of features offered by
the PB317X,PB417X,PB617X,PB717X,PB1217X,
and PB1617X, you’ll know you made the right choice
with a Pyramid Power amplifier.
25
precautions
Do not operate the amplifier when it is unmounted,
Attach all audio system components securely within
the automobile to prevent damage, especially in an
accident.
Do not mount this amplifier so that the wire connections
are unprotected, or in a pinched condition, or likely to be
damaged by nearby objects.
If you need to replace the power fuse, do so only with a fuse
identical to that supplied with the amplifier. Using a fuse of a
different type or rating may result in damage that isn’t covered
in the manufacturer ’s warrantly.
.
Before making or breaking power connections in your system,
disconnect the vehicle battery. Confirm that your head unit or
other equipment is turned off while connecting the input jacks
and speaker terminals.
notes
table of contents
general features 2 3-
features and specifications
1
4 5-
24
2ch amp PB317X PB717X
2ch amp PB1217X 6 7-
4ch amp PB417X PB617X 8 9-
4ch amp PB1617X 10-11
electrical connections
2ch amp PB317X PB717X 12
2ch amp PB1217X 13
4ch amp PB417X PB617X PB1617X 14
stereo input connections
2CH amp PB317X PB717X PB1217X 15
mono input connections
2CH amp PB317X PB717X PB1217X 16
2/4 channel input connections
4CH amp PB417X PB617X PB1617X 17
18
19
2ch amp PB1217X
2ch amp PB317X PB717X
speaker connections
20
21-22
4CH amp PB417X PB617X PB1617X
23
mounting and installation
24
protection circuitry and troubleshooting
25
precautions
troubleshooting
Protection circuitry
The built-in protection circuitry in the pyramid
Arctic amplifiers will disable the amplifier if it
senses an input overload, a speaker short
circuit, or extreme temperature conditions.
If this occurs ,carefully inspect the system to
determine the source of the problem.
When the protection circuit is activated by any
of these conditions, the Protection LED will be
illuminated.
If the shutdown was a result of a thermal overload
condition, allow the amplifier to cool down before
attempting to restart it.
If the shutdown was a result of an input overload,
or speaker short circuit, be sure to corr the
condition before restarting.
The amplifier can be restarted by turning the
remote power OFF and then ON again.
No output.
Check both in-line and built-in fuses. Both the +12V and the Remote terminals
must have +12V referenced to chassis ground.
Confirm that all terminal strip connections are secure and tight.
Confirm that the audio signal source(car radio, equalizer, etc.) Is connected
and is supplying output signal. To check if the amp is supplying signal, unplug
the cables from the signal source(but leave them plugged into the amp).
Briefly tap the center pin of each of the disconnected RCA plugs with your finger.
This should produce a noise)feedback) in your speakers.
Only one channel works.
Confirm that all terminal strip connections are secure and tight.
If the above steps fail to improve or clear noise interference, the system
should be checked by a professional mobile audio installer.
If you are using the Low Level RCA input , reverse the input plugs at the
amplifier(i.e.,switch the L with the R). If the channels which is silent switches
to the other side, the problem is either in the head unit/other source or the
connecting cables.
Weak output.
If the noise is a “clicking” or “popping” noise whose rate follows the engine
speed, this usually means that the vehicle is equipped with resistor spark
plugs and wires, or that the ignition is in need of service.
Noise in the audio.
Readjust the Input Level Control(s) to better suit the input signal.
If the noise is a “whine” whose pitch follows the engine speed, confirm that
the amplifier and any other signal sources(hesd unit, etc.) Are properly ground.
Check the Balance control on the head unit(or other source) to verify that it
is set to its midpoint.
Check the routing of the speaker and input wires to make sure they are not
adjacent to wire which interconnect lights and other accessories.
mono input connections
4CH amp PB417X PB617X PB1617X

Produktspezifikationen

Marke: Pyramid
Kategorie: Empfänger
Modell: Arctic PB617X

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyramid Arctic PB617X benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Empfänger Pyramid

Pyramid

Pyramid ZPA100 Bedienungsanleitung

31 August 2024
Pyramid

Pyramid PB717X Bedienungsanleitung

20 August 2024
Pyramid

Pyramid PB715X Bedienungsanleitung

19 August 2024
Pyramid

Pyramid PB918 Bedienungsanleitung

19 August 2024
Pyramid

Pyramid PB2518 Bedienungsanleitung

18 August 2024
Pyramid

Pyramid America UPB918 Bedienungsanleitung

18 August 2024
Pyramid

Pyramid America UPB3818 Bedienungsanleitung

18 August 2024
Pyramid

Pyramid PB3818 Bedienungsanleitung

26 März 2024
Pyramid

Pyramid Arctic PB617X Bedienungsanleitung

12 Juni 2023
Pyramid

Pyramid Arctic UPB717X Bedienungsanleitung

12 Juni 2023

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024
Denon

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024
Pro-Ject

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024
AKG

AKG HP12U Bedienungsanleitung

15 Oktober 2024
Sennheiser

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024
Yamaha

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024
JL Audio

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024
Pioneer

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024
Technics

Technics SA-160L Bedienungsanleitung

8 Oktober 2024
Avantree

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024