Pyle PWA15BT Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PWA15BT (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 26 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
(*For Model PWA15BT only)
ON/OFF VOLUME ON/OFF VOLUME
Speaker Output
Terminal Connectors
MIC MIC
USB
DC INAUX DC INAUX
BT PWR PWRPRT
PWA15BT
PWA15BT PWA12
PWA12
BT
STEREO
MIC
STEREO
MIC
Connecting Audio:
Line level audio is typically supplied via the front 3.5mm input jack --
audio may be alternatively supplied via the BLACK/WHITE/GRAY
pigtail leads located on the rear of the amplifier receiver wall plate
(for hard-wired speaker connection).
*Please note: The unit may cease to function, or function irregularly,
if more than one audio source is connected to the unit. Ensure only
a single audio source is connected at a time, to allow for optimum
performance and functionality; use only one or the other (front panel
AUX input or the rear panel pigtail connectors).
In-Wall / Wall Plate Audio Control Amplifier Receiver System In-Wall / Wall Plate Audio Control Amplifier Receiver System
In-Wall / Wall Plate Audio Control Amplifier Receiver SystemIn-Wall / Wall Plate Audio Control Amplifier Receiver SystemIn-Wall / Wall Plate Audio Control Amplifier Receiver System
Bluetooth Setup Instructions (*for Model PWA15BT ):only
The In-Wall Amplifier has built-in Bluetooth receiver ability, allowing you
to wirelessly stream audio to your connected speaker system. Follow
these steps to get connected:
Installation Notes:
- Make sure the unit is properly connected to a power source.
- Make sure the unit is properly connected to external speakers.
Bluetooth Device Pairing
1. Before attempting to pair / connect, ensure the unit is in ‘Bluetooth
Mode’. Enter ‘Bluetooth Mode’ by selecting ‘BT’ on the unit’s front panel Input
Selector.
2. Power ON the unit by turning the rotary Volume Control knob.
3. The Volume Control knob doubles as a button, press and hold in the
Volume Control knob button for 3 seconds (or until the ‘BT’ Bluetooth indicator light
begins to blink. (You may also hear the system prompt say ‘Power ON’.
4. Then, goto your Smart device’s Bluetooth Network Settings and connect
to the Wall Plate. The Network Name will appear as ‘BT-RY’ on your device list. No
password is required to connect, but if you are prompted enter ‘0000 (4 zeroes).
5. Upon pairing, the Bluetooth LED indicator light will blink progressively
quicker and you will hear the system prompt ‘Paring’, until the unit successfully pairs
with a compatible Bluetooth device.
6. When a successful Bluetooth connection is established, the Bluetooth
LED indicator light will shine solid and you will hear the system prompt, ‘Your device
is connected’, indicating that the unit is ready to transmit audio.
Connecting Power:
Under normal circumstances, power is connected to the front panel
power input via the included AC adapter. Power may be supplised
from an alternative 12V DC power source via the rear pigtail RED+ /
BLACKS leads (for hard-wired installations). When an AC adapter
powers the unit, via the front panel power input, the RED+ lead is
disconnected.
Compatibility:
This product occupies standard single gang device space and is
compatible with most deep sized electrical boxes or low voltage
bracket systems.
*Please note: minor fitting adjustments may be necessary for mounting the
wall plate amplifier receiver in certain wall installation applications.
Model: ‘PWA12 Features:
• Microphone Paging and Speaker Control Made Easy
• In-Wall Audio Control Receiver with Built-in Amplifier
• Universal Gang Box / Wall Plate Standard Size
• Can be Hard-Wired or Powered via Included Power Adapter
Aux (3.5mm) Input
• Connect & Stream Audio from Your Favorite Devices
• (Smartphones, Tablets, MP3 Players, Laptops, Computers, etc.)
• 1/4'' Microphone Input
• Speaker Terminal Block, Connect up to (2) Speakers
• Rotary Volume Control
• Input Selector Switch (Stereo, Mic)
• Perfect for Home or Office Applications
• Built-in Safety: Circuit and Overload Protection
• LED Indicator Lights
• Power ON/OFF Switch
• Includes: Power Adapter & Wall Plate Cover
Technical Specs:
• Power Output: 100 Watt Peak, 40 Watt RMS x 2 Ch. @ 4 Ohm
• Mic Input Type: Dynamic
• Power Amp Type: Stereo Class-T
• Minimum Load Resistance: 4 Ohm
• T.H.D.: 0.06% (8 Ohm, 1 kHz)
• Power Draw: 2 Amps
• Power: AC 100-240V, 50/60Hz (12V DC Adapter)
Model: ‘PWA15BT’ (with Bluetooth) Features:
• Microphone Paging and Speaker Control Made Easy
• Bluetooth Wireless Music Streaming Ability
• In-Wall Audio Control Receiver with Built-in Amplifier
• Universal Gang Box / Wall Plate Standard Size
• Can be Hard-Wired or Powered via Included Power Cable
Aux (3.5mm) Input
• Connect & Stream Audio from Your Favorite Devices
• (Smartphones, Tablets, MP3 Players, Laptops, Computers, etc.)
• USB Port for Device Charging
• 1/4'' Microphone Input
• Rotary Master Volume Level Control
• Speaker Terminal Block, Connect (2) Speakers
• Input Selector Switch (Stereo, Mic, Bluetooth)
• LED Indicator Lights
• Power ON/OFF Switch
• Perfect for Home or Office Applications
• Built-in Safety: Circuit and Overload Protection
Accessories Included: Power Adapter & Wall Plate Cover
Bluetooth Connectivity:
• Controller Receives & Directs Bluetooth Wireless Audio
• Works with All of Your Favorite Devices:
• (Smartphones, MP3 Players, Tablets, Laptops, Computers, etc.)
• Bluetooth Network Name: 'BT-RY' (No Password Required)
• Wireless Range: 30' Feet (10 Meters)
Technical Specs:
• Power Output: 100 Watt Peak, 40 Watt RMS x 2 Ch. @ 4 Ohm
• Mic Input Type: Dynamic
• Power Amp Type: Stereo Class-T
• Minimum Load Resistance: 4 Ohm
• T.H.D.: 0.06% (8 Ohm, 1 kHz)
• Power Draw: 2 Amps
• Power: AC 100-240V, 50/60Hz (12V DC Adapter)
Connecon
A
Red - Power +
B
Black - Power -
C
Black - Signal (ground)
D
Gray - Signal Le
E
White - Signal Right
1
Speaker Out, Right +
2
Speaker Out, Right -
3
Speaker Out, Le +
4
Speaker Out, Le -


Produktspezifikationen

Marke: Pyle
Kategorie: Nicht kategorisiert
Modell: PWA15BT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PWA15BT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Pyle

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-