Pyle PMD43 Bedienungsanleitung

Pyle Detektor PMD43

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PMD43 (2 Seiten) in der Kategorie Detektor. Dieser Bedienungsanleitung war für 35 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2

www.pyleaudio.com

METAL / CURRENT DETECTOR

PMD43 USER’S GUIDE

Thanks for buying our product. Please go through the

instruction manual before using the meter and carefully

follow these safety rules.

1) Locate battery cover and tu it rn counter-clock wise

using a coin to open.

2) Insert the battery in the sleeve and close (battery

not included).

3) Turn on the device by turning the wheel.

Keep turning the wheel l the indicator light unti

comes on and the alarm sounds.

Make sure that no metal or conductive object is

near the unit. Turn the wheel in the reverse

direction until the light and alarm turn off. The

device will then be ready to use.

4) If the indicator light does not work, turn the wheel a

half turn and slowly turn the adjustment resistor

using a screwdriver until the alarm comes on or

goes off according to the desired setting.

5) To detect metal objects, hold the device by the

handle and move the device horizontally against

the wall. The alarm when there is a will sound

metallic object nearby.

6) Electrically conductive objects will be indicated by a

flashing light that will become continuous when the

device is close to the conductor.

IMPORTANT

This device’s sensitivity can be adjusted to the exact

position of a metallic object or electrical conductor.

First, set the wheel. Once the light goes off, turn the

wheel a little further to narrow the detection zone.

SAFETY

When the device indicates “no current” (no flashing

light), check by operating it close to a place the device

where you know there is a current before touching the

conductor.

CAUTION

Protected conductors will not be detected: only metal

will be detected.

NOTES

1) Certain walls contain metallic fire-resistant fibres.

This can create an electrical field. You can cancel

this effect by putting your hand against the wall.

2) Rubbing or hitting the detector against the wall can

create static electricity leading to a read error.

CURRENT LOSSES

Due to the low level of current used to trigger lighting,

some detectors can appear to be faulty. A poorly

insulated conductor touching a wet wall will lead to

detection of current on the wall.

In this case, the device will indicate a potential danger

that should be checked using a voltmeter.

Produktspezifikationen

Marke:	Pyle
Kategorie:	Detektor
Modell:	PMD43
Akustische Signale:	Ja
Produktfarbe:	Gelb
Anzahl unterstützter Akkus/Batterien:	1
Akku-/Batteriespannung:	9 V
Detektierbare Materialien:	Live cable, Metal