Pyle PLMR90UW Bedienungsanleitung

Pyle Autoradio PLMR90UW

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PLMR90UW (12 Seiten) in der Kategorie Autoradio. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12

PyleUSA.com

The round-style headunit receiver radio features Bluetooth technology allowing music to wirelessly stream from

your compatible Bluetooth enabled device. Control the audio from a distance - -- all from your handheld device.

Marine grade waterproof construction makes this unit perfect for upgrading your marine audio system. The input

and output connectors allow you to connect external devices and speaker systems for a more convenient and

selective listening experience.

Warning:

It is recommended you seek the assistance of a professional upon installation.

Be sure to provide adequate clearance behind the receiver where mounting. Be sure as to avoid obstruction of any existing

wires, fuel lines, electronic circuitry or vehicle safety features prior to installation. Make sure to safely and securely prepare the

area of installation as to avoid any disruption of your vehicle's mechanical, electrical or safety systems.

Choose a mounting location with a flat surface to ensure a flush and water- tight fit.

To prevent any interference, distortion or accidental operation due to radio frequency waves or extreme temperature, --

choose a mounting and installation location farthest from the engine compartment.

Disconnect the battery to ensure there will be no shorted wires during the installation procedure.

Do not submerge the unit in water.

Installation of Marine audio components requires experience a variety of mechanical and electrical and expertise with

knowledges and practices This user manual basic and instructions for your new . provides general installation and operation

marine receiv installation er, it may not show the exact methods which may be required for your particular installation. Always

consult a professional prior to installation and mounting.

Care and Maintenance:

Clean the player with a slightly damp, soft a mild cloth using household cleaner. Do not use solvents such as benzene, thinner,

or commercially cleaners. other hazardous chemical Be sure to regularly inspect the connections on the rear of the unit for

corrosion and correct as needed.

Mounting:

Choose a mounting location on the dash allow room for proper connecting to the power source./ instrument panel that will

Take into consideration and the antenna jack if how you will use the input connectors, output connectors, USB connector

necessary. area interior Prepare the for installation by carefully removing any trim panels and obtrusive materials as

necessary. Route wire harnesses away from sharp edges, and ensure that no harnesses wire/connector will be pinched or

pierced during reassembly.

Once a suitable location has been determined, drill the hole and secure the stereo using the included screws and metal

mounting shape U- bracket.

Cut a hole in the ted area with a diameter of 3.0'' and depth of at least 3.9'' (to accommodate for the bracket mounting designa

hardware and cables/wiring.) Make sure the receiver fits snug into the drilled opening.

Insert the screw bolts into the back of the receiver. The then slides "U" bracket over the screw bolts and secures eceiver the r

to the dash opening, using hex nuts to tighten the fit. T hex nuts can continue to be tightened against thehe bracket for secure

and stable fitting against your dash / console panel.

Before cutting any panel, ALWAYS ensure that there is sufficient clearance behind the panel, and that no wire harnesses, fuel

lines, moving linkages, or any other critical components are exposed to damage by your choice of location. NEVER risk damage

to the hull while cutting your opening.

CONTENTS

Installation ........................................... 3

Wiring Connection .............................. 5

Operation ............................................. 6

Location of keys .................................... 6

Turn on/off the unit ................................ 7

Display time .......................................... 7

Auxiliary input 7.......................................

Reset function ....................................... 7

Radio operation 7 ....................................

Switching to radio mode .................... 7

Selecting the frequency band ............ 7

Selecting station ................................ 7

Preset stations selecting 7 ...................

Automatic memory storing ................. 8

USB play operation ............................... 8

Selecting tracks in single step ........... 8

Pausing playing ................................. 8

Selecting songs by BND button ......... 8

BT operation ......................................... 8

Specication .......................................10

Trouble shooting ................................. 11

Produktspezifikationen

Marke:	Pyle
Kategorie:	Autoradio
Modell:	PLMR90UW
Unterstützte Audioformate:	MP3, WMA
USB Anschluss:	Ja
Bluetooth:	Ja
Bluetooth-Version:	2.1+EDR
Produktfarbe:	Weiß
Unterstützte Bänder:	AM, FM
Digitales UKW-Radio:	87.5 - 107.9 MHz
Eingebautes Display:	Ja
Playback MP3:	Ja
Rauschverhältnis (SNR):	55 dB
Frequenzbereich:	20 - 20000 Hz
Ausgangsleistung:	56 W
Unterstützte Medien:	Nein
USB-unmittelbare Wiedergabe:	Ja
CD-R-Wiedergabe:	Nein
AM-Bandbereich:	530000 - 1710000 kHz
CD-RW-Wiedergabe:	Nein
Musik Energie:	112 W