Pyle PLMR19W Bedienungsanleitung

Pyle Autoradio PLMR19W

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Pyle PLMR19W (14 Seiten) in der Kategorie Autoradio. Dieser Bedienungsanleitung war fĂĽr 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/14
OWNER’S MANUAL
Mobile Audio System
• PLL Synthesizer Stereo Radio
• Automatic Memory Storing
• Preset Equalization
• USB Interface
• Auxiliary Input Function
• Remote Control
PLMR19W
www.pyleaudio.com
Installation...........................................3
Take out screw before installation........3
DIN Front-Mount (Method A)................3
Installing the unit ...............................3
Removing the unit .............................4
DIN Rear-Mount (Method B).................5
Wiring Connection..............................6
Operation ............................................7
Location of keys ...................................7
Switching on/off the unit ......................8
Sound adjustment ................................8
Loudness..............................................8
Display..................................................8
Mute... ..................................................8
Equalization ..........................................8
Remote sensor .....................................8
Reset function ......................................8
Radio operation....................................8
Switching to radio mode...................8
Selecting the frequency band...........8
Selecting station ...............................8
Automatic memory storing &
program scanning.............................8
Station storing...................................9
Scan ..................................................9
Mono/Stereo .....................................9
Weather band selection ....................9
USB play operation ..............................9
SD/MMC operation ............................11
Specification .....................................12
Trouble shooting...............................13
CONTENTS
2
3
Notes:
• Choose the mounting location where
the unit will not interfere with the
normal driving function of the driver.
• Before finally installing the unit,
connect the wiring temporarily and
make sure it is all connected up
properly and the unit and the system
work properly.
• Use only the parts included with the
unit to ensure proper installation.
The use of unauthorized parts can
cause malfunctions.
• Consult with your nearest dealer if
installation requires the drilling of holes
or other modifications of the vehicle.
• Install the unit where it does not get in
the driver’s way and cannot injure the
passenger if there is a sudden stop,
like an emergency stop.
• If installation angle exceeds 30º from
horizontal, the unit might not give its
optimum performance.
• Avoid installing the unit where it would
be subject to high temperature, such
as from direct sunlight, or from hot air,
from the heater, or where it would be
subject to dust, dirt or excessive
vibration.
DIN FRONT/REAR-MOUNT
This unit can be properly installed either
from “Front” (conventional DIN Front-
mount) or “Rear” (DIN Rear-mount
installation, utilizing threaded screw holes
at the sides of the unit chassis).
For details, refer to the following
illustrated installation methods.
30Âş
TAKE OUT SCREW BEFORE
INSTALLATION
Before install the unit, please remove the
two screws.
DIN FRONT-MOUNT (Method A)
Installation Opening
This unit can be installed in any dashboard
having an opening as show below:
Installing the unit
Be sure you test all connections first, and
then follow these steps to install the unit.
1. Make sure the ignition is turned off,
and then disconnect the cable from
the vehicle battery's negative (-)
terminal.
2. Disconnect the wire harness and the
antenna.
3. Press the release button on the front
panel and remove the control panel
(see the steps of “to detach front
panel”).
4. Lift the top of the outer trim ring then
pull it out to remove it.
5. The two supplied keys release tabs
inside the unit's sleeve so you can
remove it. Insert the keys as far as they
will go (with the notches facing up) into
the appropriate slots at the middle left
and right sides of the unit. Then slide
the sleeve off the back of the unit.
182 mm
53 mm
Take out screw before installation
INSTALLATION


Produktspezifikationen

Marke: Pyle
Kategorie: Autoradio
Modell: PLMR19W

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PLMR19W benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Autoradio Pyle

Bedienungsanleitung Autoradio

Neueste Bedienungsanleitung fĂĽr -Kategorien-