Pyle PLMR89WW Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PLMR89WW (12 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
1
PLMR89WW
OWNER S MANUAL
Mobile Audio System
PLL Synthesizer Stereo Radio
Automatic Memory Storing
USB Interface
SD Interface
3.5mm input jack
Weather Band function
www.pyleaudio.com
2
CONTENTS
Installation ........................................... 3
Take out screw before installation ......... 3
DIN Front-Mount ................................. 3
Installing the unit ............................... 3
Removing the unit ............................. 4
Wiring Connection .............................. 5
Operation ............................................. 6
Location of keys .................................... 6
Switching on/off the unit ........................ 7
Sound adjustment ................................. 7
Display information ............................... 7
Liquid crystal display ............................. 7
Auxiliary input ....................................... 7
Reset function ....................................... 7
Radio operati on .................................... 7
Switching to radio mode .................... 7
Selecting the frequency band ............ 7
Selecting station ................................ 8
Automatic memory storing&
program scanning 8 .............................
Station storing 8 ...................................
USB play operation ............................... 8
Selecting tracks in single step ........... 8
Selecting directory up/down .............. 8
Pausing playing ................................. 8
Previewing all tracks .......................... 8
Repeating the same track ................. 8
Playing all tracks in random .............. 9
Selecting songs by AS PS/ button ...... 9
SD operation ......................................... 9
Remote control .....................................10
Specication ....................................... 11
Trouble shooting ................................. 12
3
INSTALLATION
Notes:
oose the mounting location where Ch
the unit will not interfere with the
normal driving function of the driver.
Before nally installing the unit, connect
the wiring temporarily and make sure it
is all connected up properly and the
unit and the system work properly.
Use only the parts included with the
unit to ensure proper installation. The
use of unauthorized parts can cause
malfunctions.
Consult with your nearest dealer if
installation requires the drilling of holes
or other modications of the vehicle.
Install the unit where it does not get in
the driver’s way and cannot injure the
passenger if there is a sudden stop, like
an emergency stop.
If installation angel exceeds 30°from
horizontal, the unit might not give its
optimum performance.
Avoid installing the unit where it would
be subject to high temperature, such as
from direct sunlight, or from hot air,
from the heater, or where it would be
subject to dust, dirt or excessive
vibration.
DIN FRONT-MOUNT
Installation Opening
This unit can be installed in any dashboard
having an opening as shown below:
Installing the unit
Be sure you test all connections rst, and
then follow these steps to install the unit.
1. Make sure the ignition is turned o, and
then disconnect the cable from the
vehicle battery’s negative (-) terminal.
2. Disconnect the wire harness and the
antenna.
3. Mount the sleeve by inserting the sleeve
into the opening of the dashboard and
bend open the tabs located around the
sleeve with a
screwdriver. Not all tabs will be able to
make contact, so examine which ones
will be most effective. Bending open the
appropriate tabs behind the dashboard
to secure the sleeve in place.
Tabs
Screwdriver
Sleeve
Dashboard
4. Reconnect the wire harness and the
antenna and be careful not to pinch any
wires or cables.
5. Slide the unit into the sleeve until it
locks into place.
6. To further secure the unit, use the
supplied metal strap to secure the back
of the unit in place. Use the supplied
hardware (Hex Nut (M5mm) and Spring
Washer) to attach one end of the strap
to the mounting bolt on the back of the
unit. If necessary, bend the metal strap
to fit your vehicle’s mounting area. Then
use the supplied hardware (Tapping
30
53mm
182mm


Produktspezifikationen

Marke: Pyle
Kategorie: Nicht kategorisiert
Modell: PLMR89WW

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PLMR89WW benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Pyle

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-