Pyle PLCM4700 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PLCM4700 (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
WARNING: injuryFailure to read and follow these warnings and instructions may result in serious , including damaged
property, so please pay close attention and exhibit the utmost care.
• The Digital Backup Camera is designed as an aid to the driver in detecting potentially hazardous driving conditions,
obstructions, and large stationary objects also remember to drive . You, the driver, must safely and properly. Use of the
Digital Backup Camera is not a substitute for safe, proper and legal driving practices.
• Never back up while looking only at the screen. You should always check behind and around the vehicle when backing
up just as you would if the vehicle did not have the Digital Backup Camera. Always make sure your driving area is clear.
Always back up slowly and with caution.
• Never depend on the Backup Camera entirely when backing up. The image on the screen is different from actual and
real-time conditions. Objects viewed in the rear view monitor differ from actual distance angle lens is s because a wide-
used. So use the camera as an aid and always follow intended driving practices to properly judge distances from objects.
• The Backup Camera's assisted low lux lighting performance feature is an aid to a driver Always use your own eyesalso .
to confirm the vehicle’s surroundings, as the displayed image may be not well lit or not entirely visible. Always proceed
with caution and perform double before proceeding. -checks
• The area displayed by the Backup Camera is limited. objects that are close to or It does not display just below the
bumper, underneath the vehicle, or objects out of the camera’s view. The camera's view can change according to your
vehicle's orientation on the road or changing road conditions.
• Be sure to check the calways amera is properly functioning, is properly positioned securely ed and mount .
• Make sure operates correctly, as intended, before and after installationyour trunk hatch or .
• Proceed with caution when cleaning your vehicle around the camera. water exposure around the camera Avoid excess
especially with spraying or a power washer.
• Please make sure to keep the camera clean and unobstructed from any debris
• Follow all traffic laws and motor vehicle regulations.
• Consult local laws and regulations for any restrictions on installation or use.
• Using a Backup Camera is not enough to completely System adequate eliminate a Always remember vehicle’s blind spot.
to drive with caution, following all traffic laws.
Please read all of the installation instructions carefully before installing the product. Improper installation will void
manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as
guidelines to assist in installing the system. Please consult an experienced technician if you are not comfortable
installing the product. Prior to using and installing the Backup Camera System, please read the safety information
provided in this user manual. Be sure to use the product as outlined in this user manual. Altercation or modifications
carried out without appropriate authorization may invalidate the user's right to operate the equipment.
System Installation and Wiring
Camera Syste or may not even be compatible for m installation on diesel vehicles require a slightly different wiring installmay --
installation with your vehicle. These installation instructions do not apply to all types of vehicles. They are meant only as a general
guide due to the large number of vehicle makes and models. Consult your local motor vehicle laws on the use of this product to be
sure it is permitted. Through installation of this backup camera system, you should be sure as to not degrade, damage or compromise
the safety of any system or device on your vehicle. Improper installation and wiring of the vehicle back-up camera system may
damage the vehicle's electrical system, including vital vehicle computer and operating systems. That could lead to an accident or fire,
causing property damage and /or serious personal injury. It is highly recommended to seek professional installation advice from a
qualified auto electrician or, in the alternative, to have the installation performed by a qualified auto electrician.
Please ensure that your monitor is secured and mounted where it would NOT obstruct any OEM vehicle safety features. In an event of
an accident, manufacturer is not responsible for bodily injury caused by the monitor being a projectile. Select location for mounting
the monitor in desired location. Ensure monitor location will not obstruct your vision while driving. The manufacturer assumes no
liability for damage caused to your vehicle due to improper installation or use.
Quick Installation:
The backup camera system is compatible with a wide range of vehicles and video display monitors .
This kit includes necessary wiring and cable connector accessories sufficient for typical connections. However,
additional accessory cables and installation materials may be necessary for a completely secure and
operational backup camera performance.
Connect the camera, using the red cable, of the DC 12V power cable to the positive 12V reverse tail light in the ,
rear of your car. You may need to temporarily remove an interior panel or other cover. Then, connect the black
wire, of the DC 12V power cable, and ground properly. This connected power and ground cable connects to the
camera, and will supply power to camera directly.the (Red wire is positive, black wire is negative)
Then use the included yellow RCA video connector cable, and run that cable to the yellow RCA connector video
jack of the camera , to the RCA video connector of a compatible video display monitor.
*The system includes an additional video input connection, so you will have the ability to connect an additional
video input source. The input source is then selectable via button on the monitor.
Connect the monitor using the included sing the red cable, of the next DC 12V cables. U power cable, connect to
your vehicle's fuse panel (preferably to the 12V ignition switch) - which will only be powered when your vehicle is
on, or activated by key. Then connect the black wire, of the DC 12V input, and ground properly. The system
includes a cigarette lighter accessory power outlet cable, for optionally providing power to the video monitor
display.
Caution: This unit is designed to operate on DC NEGATIVE GROUND electrical systems. Connecting to other types of electrical systems will
cause damage to your vehicle. Please contact the manufacturer if you are unaware of the system type in your vehicle.


Produktspezifikationen

Marke: Pyle
Kategorie: Nicht kategorisiert
Modell: PLCM4700

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PLCM4700 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Pyle

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-