Pyle PLCM4565 Bedienungsanleitung

Pyle Kamera PLCM4565

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PLCM4565 (6 Seiten) in der Kategorie Kamera. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
Backup Camera & Video Monitor System
PLCM4565
with 4.3’’ Display Rearview Mirror,
Smart Responsive Distance Scale Lines,
Angle Adjustable Waterproof Cam
Please read instructions carefully before installation and use.
Installation should be performed by a professional installer.
General Introduction
This rear view mirror monitor is designed for car rear view purpose, which can work
with a reversing camera (NTSC or PAL) to show the real-time images behind your
car, with good compatibility with multimedia parking sensor system beside the
camera. With dual video input, it can be to a car DVD player, too. When connected
reversing gear is engaged the rear view system automatically starts to work and
when the monitor is powered o, the mirror functions just like a normal rear view
mirror as the monitor is hidden and almost invisible. OEM Replacement style with
Bluetooth and compass function optional.
Operation
• The screen only works when it has video signal going into it. When video 1 input
receives signal the screen turns to video one. You can use the power buttons ON
to turn the mirror o and on. When the signal is removed the screen turns o.
• When video channel 2 receives video signal the screen powers ON and
switches to video two, regardless of whether there is signal going into channel 1.
When in video two mode, the power button on the mirror can be used to control
5 dierent brightness settings of the monitor. When signal is removed from video
two either the screen will switch to video one if there is signal present there or
switch o if there is no signal.
• The screen can adjust its brightness according to the ambient light condition.
When the ambient light is strong, the screen will be brighter; similarly, the screen
will decrease its brightness to protect your eyesight and so it isn’t too bright
while driving when the ambient light is low.
• The mirror also has a compass and temperature features, long press the power
button to this function, when the compass works, it will indicate the ON/OFF
driving direction with 8 dierent directions (E, SE, A, SW, W, NW, N, NE);
In temperature mode is alternating with outside temperature.
www.PyleUSA.com
1
Wiring Diagram
Rearview Mirror
Attention
When connecting with Power cable, please make sure not to mistaken the positive
and negative pole, otherwise the fuse will melt down itself immediately for security
protection. In case it happens, please replace the melted fuse with a new one with
same specication, and the connect properly to the right pole. Don't randomly
increase the current magnitude of the fuse, and NEVER use metal wire as a substitute.
REAR VIEW BACKUP CAMERA
Wire Connection
1. Please hard wire the red positive wire connected to the round 1mm DC plug
(pictured below) to your reverse tail light positive 12V connection and the black
wire to the closest available ground. You will probably need a small length of wire
to reach from your reverse tail light to the DC plug.
www.PyleUSA.com 2
RED 12V (ACC) +
BLACK(to Ground)
Av1(to DVD player)
Av2(to Reversing camera)
TEMPERATURE IN
TEMPERATURE OUT
Ambient Light Sensor Standby Indicator
Power Button
COMPASS
When V1 channel has signal in, press to on/off
When V2 channel has signal in, press to adjust brightness


Produktspezifikationen

Marke: Pyle
Kategorie: Kamera
Modell: PLCM4565

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PLCM4565 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kamera Pyle

Bedienungsanleitung Kamera

Neueste Bedienungsanleitung für -Kategorien-