Pyle PLCM4378WIR Bedienungsanleitung
Pyle
Rückfahrkameras
PLCM4378WIR
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PLCM4378WIR (6 Seiten) in der Kategorie Rückfahrkameras. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/6
www.PyleUSA.com
Please read all of the installation instructions carefully before installing the product. Improper installation
will void manufacturer's warranty. The installation instructions do not apply to all types of vehicles, and
are written as guidelines to assist in installing the system. Please consult an experienced technician if you
are not comfortable installing the product. Prior to using and installing the Backup Camera System, please
read the safety information provided in this user manual. Be sure to use the product as outlined in this user
manual. Altercation or modications carried out without appropriate authorization may invalidate the user's
right to operate the equipment.
WARNING: Failure to read and follow these warnings and instructions may result in serious injury, including
damaged property, so please pay close attention and exhibit the utmost care.
• The Digital Backup Camera is designed as an aid to the driver in detecting potentially hazardous driving
conditions, obstructions, and large stationary objects. You,the driver, must also remember to drive safely
and properly. Use of the Digital Backup Camera is not a substitute for safe, proper and legaldriving
practices.
• Never back up while looking only at your connected monitor display screen. You should always check
behind and around the vehicle when backing up just as you would if the vehicle did not have the Digital
Backup Camera. Always make sure your driving area is clear. Always back up slowly and with caution.
• Never depend on the Backup Camera entirely when backing up. The image on the monitor display screen
may be slightly dierent from actual and real-time conditions. Objects viewed in the rear view monitor
dier from actual distances because a wide-angle lens is used. So use the camera as an aid and always
follow intended driving practices to properly judge distances from objects.
• The Backup Camera's assisted low lux lighting performance feature is also an aid to a driver. Always use
your own eyes to conrm the vehicle's surroundings, as the displayed image may be not well lit or not
entirely visible. Always proceed with caution and perform double-checks before proceeding.
• The area displayed by the Backup Camera is limited. It does not display objects that are close to or just
below the bumper, underneath the vehicle, or objects out of the camera's view. The camera's view can
change according to your vehicle's orientation on the road or changing road conditions.
• Be sure to check the camera is properly functioning, is properly positioned and securely mounted,
every time you operate your vehicle.
• Make sure your trunk or hatch operates correctly, as intended before and after installation.
• Proceed with caution when cleaning your vehicle around the camera. Avoid excess water exposure around
the camera especially with spraying or a power washer.
• Please make sure to keep the camera clean and unobstructed from any debris
• Follow all traffic laws and motor vehicle regulations.
• Consult locallaws and regulations for any restrictions on installation or use.
• Using a Backup Camera System is not adequate enough to completely eliminate a vehicle's blind spot.
Always remember to drive with caution, following all traffic laws.
1
System Installation and Wiring
Notes:
Camera System installation on diesel vehicles may require a slightly dierent wiring install.
These installation instructions do not apply to all types of vehicles. They are meant only as a general guide
due to the large number of vehicle makes and models. Consult your local motor vehicle laws on the use of
this product to be sure it is permitted.
Through installation of this backup camera system, you should be sure as to not degrade, damage or com-
promise the safety of any system or device on your vehicle.
Improper installation and wiring of the Vehicle Back-Up Camera system may damage the vehicle's electrical
system, including vital vehicle computer and operating systems. That could lead to an accident or re,
causing property damage and /or serious personal injury. It is highly recommended to seek professional
installation advice from a qualied auto electrician or, in the alternative, to have the installation performed
by a qualied auto electrician.
Please ensure that monitor is secured and mounted where it would NOT obstruct any OEM vehicle safety
features. In an event of an accident, manufacturer is not responsible for bodily injury caused by the monitor
being a projectile. Select location for mounting the monitor in desired location. Ensure monitor location will
not obstruct your vision while driving.
The manufacturer assumes no liability for damage caused to your vehicle due to improper installation or use.
Caution: This unit is designed to operate on a 12V/24V DC NEGATIVE GROUND electrical system. Connecting
to other types of electrical systems will cause damage to your vehicle. Please contact the manufacturer if you
are unaware of the system type in your vehicle.
Quick Installation:
The 2.4 G wireless modules come in two parts, they are used as the "Transmitter” and the "Receiver". When
installing, the “Transmitter”, should be connected to the camera (the camera is preferably mounted in the rear
of the vehicle, just above the license plate). The receiver is built in the display monitor. This receives the signal
from the camera connected to the transmitter.
Connect the transmitter's red power wire, of the DC 12V input cable, to the positive 12V reverse tail light in
the rear of your car. Then connect the black wire, of the DC 12V input cable, and ground properly.
The transmitter then connects to the camera, and will supply power to the camera directly.
2www.PyleUSA.com
Produktspezifikationen
| Marke: | Pyle |
| Kategorie: | Rückfahrkameras |
| Modell: | PLCM4378WIR |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Pyle PLCM4378WIR benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Rückfahrkameras Pyle
9 Juli 2024
7 Juli 2024
7 Juli 2024
Bedienungsanleitung Rückfahrkameras
Neueste Bedienungsanleitung für -Kategorien-
10 Oktober 2024
13 Juli 2024
12 Juli 2024