Pyle PEGVLN33 Bedienungsanleitung

Pyle Gitarre PEGVLN33

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PEGVLN33 (6 Seiten) in der Kategorie Gitarre. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
www.PyleUSA.com
2
First time players will achieve the best results by bringing the violin to a music teacher to assist with the
initial assembly.
Please read through the manual below to familiarize yourself with your new instrument.
If damaged goods are found, the wrong item was received, an exchange or refund in required, please
email your seller immediately.
Parts Diagram
Chin rest
Input Jack socket
Tail piece
Fine tuners
Tone control knob
Volume control knob
Bridge Finger board
Strings Tuning pegs
Scroll
Neck
EQ switch
EQ (violin equalizer)
Chin rest screw
Battery
Headphone input
EQ Indicator light
Bow
1. BRIDGE: The bridge is preset before we ship out the violin; however, since it is not permanently
glued on, and it’s held down by the tension of the strings only, it might come o or misalign
during shipment. If that happen, please reinsert the bridge into proper position. Keep in mind
that not all players have the same size hands and ngers. Some violins come with the bridge
not set at the correct height for the player and need to be adjusted. If this is the case then a
professional luthier should adjust the bridge to get it comfortable to play.
2. STRINGS: Gradually tighten each string in the sequence of . The reason for starting G-D-A-E
from G string is to prevent damaging the thinner E and A strings. Tighten only 1-2 notes higher
on one string at a time. Then tighten the next. Do not tighten one string all the way to the
desire pitch while leaving the other strings very loose. This will create unequal pressure on the
bridge causing it to fall.
www.PyleUSA.com
3
Getting Started
You must assemble and tune your new violin prior to playing. If you have a violin instructor we recommend you see
him/her to assist you with assembling, cleaning, and tuning your instrument for the rst time. If you cannot wait,
follow these steps:
3. PEGS: The pegs can be shrink or expand due to the temperature and humidity changes.
When the peg shrink, it will not t the peg hole as well as they were originally made. It will
leave a little gap between the peg and peg hole. This is why the strings slip. Simply apply the
rosin powder or peg drop oil (which you can get from the retail store) on the pegs and peg
hole. This will ll the little gap in between and increase the friction.
4. BOW: Floss the bow with Rosin for at least 5-10 minutes until you see the white powders
come out from the horse hair before it can make sound.


Produktspezifikationen

Marke: Pyle
Kategorie: Gitarre
Modell: PEGVLN33

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PEGVLN33 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Gitarre Pyle

Bedienungsanleitung Gitarre

Neueste Bedienungsanleitung für -Kategorien-