Pyle PDA99BU Bedienungsanleitung

Pyle Empfänger PDA99BU

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PDA99BU (12 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
WARNING!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
THE COVER OF THIS UNIT. THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO A QUALIFIED TECHNICIAN.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This device generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television reception, which can be
determined by turning the device o and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
Changes or modications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS)
d'Innovation, Sciences et Développement économique Canada.
Le fonctionnement est soumis aux deux conditions suivantes:
(1) Cet appareil ne doit pas causer d'interférences.
(2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un
fonctionnement indésirable de l'appareil
1. . Read these instructions thoroughly before using this item
2. Keep these instructions for future reference.
3. . Heed all warnings
4. Follow all instructions.
5. WARNING: To prevent re or electric shock, do not expose this equipment to
rain or moisture. Do not store or operate this product near any liquids.
6. Clean only with a dry cloth.
The lighting ash with arrow head symbol within an equilateral triangle is intended
to alert the user to the presence of dangerous” voltage within the product’s
enclosure that may be of sucient magnitude to constitute a risk of electric shock
to humans. Users should exhibit extra safety when this symbol appears in this
instruction manual and follow all precautions as they are stated.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in
this manual.
www.PyleUSA.com
2
www.PyleUSA.com
3
7. Do not store or operate this product near any heat sources such as radiators, heat
registers, stoves, or other apparatuses (including ampliers) that produce heat.
8. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding plug
has two blades and a round grounding prong. The wide blade or third prong is
provided for your safety. If the provided plug does not t your outlet, consult an
electrician for the replacement of the obsolete outlet.
9. Protect the all wires connected to this unit from being walked on or pinched,
particularly plugs and the point where they exit from the unit. When removing the
cord from the power outlet, remove it by holding the plug not by pulling the cord.
10. Unplug the unit during lighting storms or when unused for long periods of time.
11. When wiring this unit and all other equipment used in connection to this unit
make sure that all of your equipment is turned OFF.
12. Once installation and wiring is complete power on all your equipment with the
volume and level controls turned DOWN. Once all the equipment is ON slowly
raise the volume or level controls to their proper positions.
13. When grounding this unit, be sure to do so correctly, so as not to defeat the
built-in grounding in this unit.
14. Before placing, installing, rigging, or suspending any product, inspect all
hardware, suspension, cabinets, transducers, brackets and associated equipment
for damage. Any missing, corroded, deformed, or non-load rated component
could signicantly reduce the strength of the installation, placement or array.
Any such condition severely reduces the safety of the installation and should
be immediately corrected. Use only hardware which is rated for the loading
conditions of the installation and any possible short-term, unexpected overloading.
Never exceed the rating of the hardware or equipment.
15. Consult a licensed, professional engineer regarding physical equipment installation.
Ensure that all local, state and national Regulations regarding the safety and
operation of equipment are understood and adhered to.
16. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Introduction
To get the most from the Wireless BT Streaming Amplier, it is recommended
that you review all of the information provided in the instruction manual before
operating the equipment.


Produktspezifikationen

Marke: Pyle
Kategorie: Empfänger
Modell: PDA99BU

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PDA99BU benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger Pyle

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-