Pure Acoustics MCP20GRA Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pure Acoustics MCP20GRA (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
MCP-20 Supreme Portable Karaoke Machine
Control Panel
t
FEATURES
Plays MP3 Files stored on your SD Card or USB Flash drive
*Max Capacity 8GB for SD Card or USB Port
Rechargeable Lithium Ion battery
Play/Pause /Forward/Rewind Buttons on unit & remote for easy access.
Full Function Infrared Remote Control
On/Off Power switch
AUX IN to connect to External Audio Players (ipods®/iphones®/ipads®/smartphones® etc.)
Audio output/Headphone port
Charg g the Unit in
Place the supplied Rechargeable Lithium-ion battery (BL-5C) into the battery compartment on
the back of the unit. Connect one end of the supplied USB cable to your computer or
Compatible USB AC/DC Adaptor (not included) & the other end ofthe cable to the speaker to
charge the speaker unit. The Red charging light on the control panel will come on. Do not
charge the unit for more than 5 hours as this will affect the Battery Life.
DO NOT USE THE UNIT WHILE CHARGING THE BATTERY.
You can use the Unit without the battery in the battery compartment, as long as the unit is
connected to a compatible USB power source.
Playing MP3 files through the speaker using the SD Card or USB Stick
The control panel is located on the front of the Speaker Unit.
1. PIug in your USB connectible device and/or SD Card in the slots provided. Please make sure to
you use the correct file format in your media devices MP3 FILES ONLY.
2. Turn the power switch to the on position; the LED display will coe o. Press the MODE"
button on the Unit or Remote to switch between USB, SD, FM Radio or AUX modes. The files
from your media should start playing, If music does not play, press the PLAY/PAUSE button to
ensure that the device is in PLAY mode. Please ensure that your speaker is fully charged & that
your files are in MP3 format, & that the Mode button is on the correct source.
3. Turn up the volume to the desired level, either from the unit's volume control on the control
panel pressing & holding (2-3 Seconds) PREV/VOL- for Volume Down or NEXT VOL + for by /
Volume up, or from the remote by pressing Vol- for Down or Vol+ for up. The Sound Output
quality off the speakers will depend on the quality of the MP3 files not the device itself
4. Short Press the PREV/ VOL - to listen to the previous track or NEXT/ VOL + to skip to the next
track press | 4 4 button to listen to the previous track or F > | on the Remote Control. or
5. To PAUSE a track, press the PLAY/PAUSE button from the Control Panel or the signal | from >
the Remote Control.
6. Please remember to power off the Speaker before removing the USB Disk or SD Card as this
may damage the unit and/or the storage device.
7. FAILURE TO FOLLOW ANY or ALL of THESE INSTRUCTIONS MAY DAMAGE THE SPEAKER SYSTEM
& WILL VOID THE WARRANTY .For external Devices such as iPods®, iPhones®, iPads®,
smartphones, MP3, MP4 players or other audio devices, use the included 3.5mm to 3.5mm
cable and connect it to the AUX input port. Press AUX on the unit or press MODE on the
remote control to switch to AUX mode.
PLEASE NOTE THAT WHILE IN AUX MODE, THE VOLUME CAN ALSO BE CONTROLED FROM YOUR
EXTERNAL DEVICE OR FROM THE SPEAKER/REMOTE.


Produktspezifikationen

Marke: Pure Acoustics
Kategorie: Lautsprecher
Modell: MCP20GRA

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pure Acoustics MCP20GRA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Pure Acoustics

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-