Pure Acoustics MCP-30 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pure Acoustics MCP-30 (4 Seiten) in der Kategorie Ladestation/Dockingstation. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
MCP- 30
Portable Mulmedia Karaoke System
Control Panel
FEATURES
Plays MP3 Files stored on your SD Card or USB Flash drive
*Max Capacity GB for SD Card or USB Port 32
Rechargeable Lithium Ion Internal baery
Play/Pause /Forward/Rewind Buons on unit & remote for easy access.
Full Funcon Infrared Remote Control
On/O Power switch
BASS TREBLE and Volume control knob
AUX IN to connect to External Audio Players (ipods®/iphones®/ipads®/smartphones® etc.)
Audio output/Headphone port
Charging the Unit
Connect one end of the supplied USB cable to your computer or Compable USB AC/DC
Adaptor (not included) & the other end ohe cable to the speaker to charge the speaker unit.
The Red charging light on the control panel will come on. Do not charge the unit for more than
5 hours as this will aect the Baery Life.
DO NOT USE THE UNIT WHILE CHARGING THE BATTERY.
You can use the Unit without the baery in the baery compartment, as long as the unit is
connected to a compable USB power source.
Playing MP3 les through the speaker using the SD Card or USB Sck
The control panel is located on the front of the Speaker Unit.
1. PIug in your USB connecble device and/or SD Card in the slots provided. Please make sure to
you use the correct le format in your media devices MP3 FILES ONLY.
2. Turn the power switch to the on posion; the LED display will come on. Press the “MODE"
buon on the Unit or Remote to switch between USB, SD, FM Radio or AUX modes. The les
from your media should start playing, If music does not play, press the PLAY/PAUSE buon to
ensure that the device is in PLAY mode. Please ensure that your speaker is fully charged & that
your les are in MP3 format, & that the Mode buon is on the correct source.
3. Turn up the volume to the desired level, either from the unit's volume control on the control
panel by pressing & holding (2-3 Seconds) PREV/VOL- for Volume Down or NEXT/ VOL + for
Volume up, or from the remote by pressing Vol- for Down or Vol+ for up. The Sound Output
quality o the speakers will depend on the quality of the MP3 les not the device itself
4. Short Press the PREV/ VOL - to listen to the previous track or NEXT/ VOL + to skip to the next
track or press | 4 4 buon to listen to the previous track or F > | on the Remote Control.
5. To PAUSE a track, press the PLAY/PAUSE buon from the Control Panel or the signal | from >
the Remote Control.
6. Please remember to power o the Speaker before removing the USB Disk or SD Card as this
may damage the unit and/or the storage device.
7. FAILURE TO FOLLOW ANY or ALL of THESE INSTRUCTIONS MAY DAMAGE THE SPEAKER SYSTEM
& WILL VOID THE WARRANTY .For external Devices such as iPods®, iPhones®, iPads®,
smartphones, MP3, MP4 players or other audio devices, use the included 3.5mm to 3.5mm
cable and connect it to the AUX input port. Press AUX on the unit or press MODE on the
remote control to switch to AUX mode.
PLEASE NOTE THAT WHILE IN AUX MODE, THE VOLUME CAN ALSO BE CONTROLED FROM YOUR
EXTERNAL DEVICE OR FROM THE SPEAKER/REMOTE.
USING THE FM Radio Funcon from the Speaker
1. Press the Mode buon on the speaker unit or Remote Control to receive FM Frequency.
2. Press & hold (2-3 seconds) the PLAY/ PAUSE buon on the unit to auto scan and the unit will


Produktspezifikationen

Marke: Pure Acoustics
Kategorie: Ladestation/Dockingstation
Modell: MCP-30

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pure Acoustics MCP-30 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Ladestation/Dockingstation Pure Acoustics

Bedienungsanleitung Ladestation/Dockingstation

Neueste Bedienungsanleitung für -Kategorien-