Proaim CM-ACKG-02 Bedienungsanleitung

Proaim Stativ CM-ACKG-02

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Proaim CM-ACKG-02 (4 Seiten) in der Kategorie Stativ. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Acon King Sucon Mount Car Camera Rigging -8”
System (CM ACKG 02) - -
A s s e m b l y M a n u a l
2x 8''Sucon Cup
3 x 6'' pipe with 48mm OD 2x Safety Straps
5 x 360° Rotang Speed Rail Clamp 2 x Washer
Flight Case
Bolt and 5mm Allen Key
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
What s In The Box
2
Press the hidden buon on the bumper panel
in the front of the vehicle, and remove it, as
shown in the image.
Loosen and remove the washer from the 6''
pipe quickly with the help of a 5mm Allen key.
Insert a toe hook into the
(Not included)
hidden panel and ghten it correctly.
NOTE: The toe hook's purpose is to help you
set up your setup easily.
6'' pipe with 360° Rail Clamp Setup
Now, place one washer on the top of the toe
hook such that their holes align with each
other. Screw in the other washer from the
boom.
Now, loosen the 36 rotang speed rail
clamp and aach one end to the 6" pipe.
Insert the washer screw into the 6" pipe, then
ghten them properly with the help of a 5mm
Allen key.
3
Insert the rod into the other
(Not Included)
end of the speed rail clamp and ghten it
correctly with the help of a 5mm Allen key.
Place your sucon cup in the selected posion
on the car surface. Next, press the sucon
pump to create a vacuum between the
sucon cup and the car surface. Finally,
release the pump to mount the sucon cup
properly.
Insert the 6" pipe on the sucon cup into one
end of the 360° rotang speed rail clamp.
Then, insert a rod into the
(Not included)
other end of the clamp.
Although the sucon cup holding force is
adequate for regular driving shots, you must
use safety belts/tension straps for addional
security. When mounted on cars, properly
secure the objects aached to the sucon cup
(e.g. camera, gimbal, etc.). Use rubber sleeves
to avoid dents and scratches on car paint.
Tighten safety straps carefully to prevent
damages.
Aer inserng the rod, ghten the clamp
properly with the help of a 5mm Allen key.
Sucon Cup Setup
To guarantee proper adhesion of sucon cups, check that the cup surfaces & mounng surface is clean,
dry & dust free. Please mount it on smooth, even & non porous surfaces. - -


Produktspezifikationen

Marke: Proaim
Kategorie: Stativ
Modell: CM-ACKG-02

Brauchst du Hilfe?

Wenn Sie Hilfe mit Proaim CM-ACKG-02 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Stativ Proaim

Bedienungsanleitung Stativ

Neueste Bedienungsanleitung für -Kategorien-